Strengthening of 5 Rural Roads in Kundrathur Block of Kancheepuram District under State Finance Commission 2019-20 Panchayat Union Grant Savings Fund having Pkg No.01/2019-20

Amount

Part - I -Strengthening of Koluthuvancheri Achari Nagar Road Km 0/0 - 0/160 in Ayyappanthangal Panchayat Est.Amt - Rs.8.76 Lakh

Earthwork excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram etc as per clause SS 20A

Providing granular sub base to required thickness including cost and conveyance of all materials from approved quarry and consolidation by power roller as per clause 401 of MoRTH specification - Rate for 100mm thick or 1cum (Mix in place method) Gr.III

Providing & laying spreading & compacting graded stone aggeragate to Wet Mix Macadam specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by Tipper to site laying and in Uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired as per MOTH Specification 406 IV revision

Applying primer coat over the WMM suface using with Emulsion bitumen binder 7.0 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Applying tack coat over the WMM suface using with Emulsion bitumen binder 2.5 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Providing and laying 50mm consolidated thickness of Bituminous macadam using graded matel using bitumen 60/70 grade including cost & conveyance and all other labour charges etc., complete as per clause 504 MoST specification

Providing and laying open graded premix carpet of 20mm thick using paver finishing compacted thick using 0.18 cum of 13.2 mm IRC size HBG metal and 0.09 cum of 11.2mm IRC size HBG metal with 2.44kg of shredded plastic with 12.16 Kg of 60/70 grade bitumen for premixing for 10 Sq.mm of premix carpet and 0.09 cum of 6.7mm IRC size HBG chips with 9.8 Kg of 60/70 grade bitumen for seal coat for 10sqm and conveyance of metal /Chips from approved sources to work site stacking the same at road side to departmental metric gauge for taking premeasurements including cost of 60/70 grade bitumen which will be supplied by the department at the rate and place as specified in the special condition appended including heating the bitumen in bitumen boilers heating the aggregate and mixing them with bitumen in central hot mix plant for premix carpet, rolling by 80/100 KN power roller for premix carpet and spreading the seal coat mix over the premix carpet and rolling by 80/100 KN power roller separately including labour charges for spreading the mix for premix carpet and seal coat including hire and fuel charges for bitumen boiler minimix plant and power roller and hire charges for all other tools and plants employed etc. complete asper MOST specification 509 & 513 (III revision). Using paver machine.

Filling with US Gravel in layers of not more than 15 cm thick for side berms of the road including 100% consolidation with power roller etc., complete

Part - II - Strengthening of Baradhiyar Street Main Road Km 0/0 - 0/215 in Ayyappanthangal Panchayat Est.Amt - Rs.11.75 Lakh

Earthwork excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram etc as per clause SS 20A

Providing granular sub base to required thickness including cost and conveyance of all materials from approved quarry and consolidation by power roller as per clause 401 of MoRTH specification - Rate for 100mm thick or 1cum (Mix in place method) Gr.III

Providing & laying spreading & compacting graded stone aggeragate to Wet Mix Macadam specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by Tipper to site laying and in Uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired as per MOTH Specification 406 IV revision

Applying primer coat over the WMM suface using with Emulsion bitumen binder 7.0 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Applying tack coat over the WMM suface using with Emulsion bitumen binder 2.5 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Providing and laying 50mm consolidated thickness of Bituminous macadam using graded matel using bitumen 60/70 grade including cost & conveyance and all other labour charges etc., complete as per clause 504 MoST specification

Providing and laying open graded premix carpet of 20mm thick using paver finishing compacted thick using 0.18 cum of 13.2 mm IRC size HBG metal and 0.09 cum of 11.2mm IRC size HBG metal with 2.44kg of shredded plastic with 12.16 Kg of 60/70 grade bitumen for premixing for 10 Sq.mm of premix carpet and 0.09 cum of 6.7mm IRC size HBG chips with 9.8 Kg of 60/70 grade bitumen for seal coat for 10sqm and conveyance of metal /Chips from approved sources to work site stacking the same at road side to departmental metric gauge for taking premeasurements including cost of 60/70 grade bitumen which will be supplied by the department at the rate and place as specified in the special condition appended including heating the bitumen in bitumen boilers heating the aggregate and mixing them with bitumen in central hot mix plant for premix carpet, rolling by 80/100 KN power roller for premix carpet and spreading the seal coat mix over the premix carpet and rolling by 80/100 KN power roller separately including labour charges for spreading the mix for premix carpet and seal coat including hire and fuel charges for bitumen boiler minimix plant and power roller and hire charges for all other tools and plants employed etc. complete asper MOST specification 509 & 513 (III revision). Using paver machine.

Filling with US Gravel in layers of not more than 15 cm thick for side berms of the road including 100% consolidation with power roller etc., complete

Part - III - Strengthening of Koluthuvancheri Sivaramakrishnan Nagar Cross Road Km 0/0 - 0/11 in Ayyappanthangal Panchayat Est.Amt - Rs.6.04 Lakh

Earthwork excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram etc as per clause SS 20A

Providing granular sub base to required thickness including cost and conveyance of all materials from approved quarry and consolidation by power roller as per clause 401 of MoRTH specification - Rate for 100mm thick or 1cum (Mix in place method) Gr.III

Providing & laying spreading & compacting graded stone aggeragate to Wet Mix Macadam specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by Tipper to site laying and in Uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired as per MOTH Specification 406 IV revision

Applying primer coat over the WMM suface using with Emulsion bitumen binder 7.0 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Applying tack coat over the WMM suface using with Emulsion bitumen binder 2.5 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Providing and laying 50mm consolidated thickness of Bituminous macadam using graded matel using bitumen 60/70 grade including cost & conveyance and all other labour charges etc., complete as per clause 504 MoST specification

Providing and laying open graded premix carpet of 20mm thick using paver finishing compacted thick using 0.18 cum of 13.2 mm IRC size HBG metal and 0.09 cum of 11.2mm IRC size HBG metal with 2.44kg of shredded plastic with 12.16 Kg of 60/70 grade bitumen for premixing for 10 Sq.mm of premix carpet and 0.09 cum of 6.7mm IRC size HBG chips with 9.8 Kg of 60/70 grade bitumen for seal coat for 10sqm and conveyance of metal /Chips from approved sources to work site stacking the same at road side to departmental metric gauge for taking premeasurements including cost of 60/70 grade bitumen which will be supplied by the department at the rate and place as specified in the special condition appended including heating the bitumen in bitumen boilers heating the aggregate and mixing them with bitumen in central hot mix plant for premix carpet, rolling by 80/100 KN power roller for premix carpet and spreading the seal coat mix over the premix carpet and rolling by 80/100 KN power roller separately including labour charges for spreading the mix for premix carpet and seal coat including hire and fuel charges for bitumen boiler minimix plant and power roller and hire charges for all other tools and plants employed etc. complete asper MOST specification 509 & 513 (III revision). Using paver machine.

Filling with US Gravel in layers of not more than 15 cm thick for side berms of the road including 100% consolidation with power roller etc., complete

Part - IV - Strengthening of Koluthuvancheri Vijayalakshmi Avenue Main Road Km 0/0 - 0/259 in Ayyappanthangal Panchayat Est.Amt - Rs.12.67 Lakh

Earthwork excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram etc as per clause SS 20A

Providing granular sub base to required thickness including cost and conveyance of all materials from approved quarry and consolidation by power roller as per clause 401 of MoRTH specification - Rate for 100mm thick or 1cum (Mix in place method) Gr.III

Providing & laying spreading & compacting graded stone aggeragate to Wet Mix Macadam specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by Tipper to site laying and in Uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired as per MOTH Specification 406 IV revision

Applying primer coat over the WMM suface using with Emulsion bitumen binder 7.0 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Applying tack coat over the WMM suface using with Emulsion bitumen binder 2.5 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Providing and laying 50mm consolidated thickness of Bituminous macadam using graded matel using bitumen 60/70 grade including cost & conveyance and all other labour charges etc., complete as per clause 504 MoST specification

Providing and laying open graded premix carpet of 20mm thick using paver finishing compacted thick using 0.18 cum of 13.2 mm IRC size HBG metal and 0.09 cum of 11.2mm IRC size HBG metal with 2.44kg of shredded plastic with 12.16 Kg of 60/70 grade bitumen for premixing for 10 Sq.mm of premix carpet and 0.09 cum of 6.7mm IRC size HBG chips with 9.8 Kg of 60/70 grade bitumen for seal coat for 10sqm and conveyance of metal /Chips from approved sources to work site stacking the same at road side to departmental metric gauge for taking premeasurements including cost of 60/70 grade bitumen which will be supplied by the department at the rate and place as specified in the special condition appended including heating the bitumen in bitumen boilers heating the aggregate and mixing them with bitumen in central hot mix plant for premix carpet, rolling by 80/100 KN power roller for premix carpet and spreading the seal coat mix over the premix carpet and rolling by 80/100 KN power roller separately including labour charges for spreading the mix for premix carpet and seal coat including hire and fuel charges for bitumen boiler minimix plant and power roller and hire charges for all other tools and plants employed etc. complete asper MOST specification 509 & 513 (III revision). Using paver machine.

Filling with US Gravel in layers of not more than 15 cm thick for side berms of the road including 100% consolidation with power roller etc., complete

Part - V - Strengthening of Kattupakkam Kundrathur Road - Koluthuvancheri Arunachalam Colony Road 2nd Cross Street Road Km 0/0 - 0/128 in Ayyappanthangal Panchayat Est.Amt - Rs.7.02 Lakh

Earthwork excavation and depositing on bank within initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth, shales, muram etc as per clause SS 20A

Providing granular sub base to required thickness including cost and conveyance of all materials from approved quarry and consolidation by power roller as per clause 401 of MoRTH specification - Rate for 100mm thick or 1cum (Mix in place method) Gr.III

Providing & laying spreading & compacting graded stone aggeragate to Wet Mix Macadam specification including premixing the material with water at OMC in Mechanical mix plant carriage of mixed material by Tipper to site laying and in Uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired as per MOTH Specification 406 IV revision

Applying primer coat over the WMM suface using with Emulsion bitumen binder 7.0 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Applying tack coat over the WMM suface using with Emulsion bitumen binder 2.5 Kg/10 sq.m including cost & conveyance of all materials and all labour charges

Providing and laying 50mm consolidated thickness of Bituminous macadam using graded matel using bitumen 60/70 grade including cost & conveyance and all other labour charges etc., complete as per clause 504 MoST specification

Providing and laying open graded premix carpet of 20mm thick using paver finishing compacted thick using 0.18 cum of 13.2 mm IRC size HBG metal and 0.09 cum of 11.2mm IRC size HBG metal with 2.44kg of shredded plastic with 12.16 Kg of 60/70 grade bitumen for premixing for 10 Sq.mm of premix carpet and 0.09 cum of 6.7mm IRC size HBG chips with 9.8 Kg of 60/70 grade bitumen for seal coat for 10sqm and conveyance of metal /Chips from approved sources to work site stacking the same at road side to departmental metric gauge for taking premeasurements including cost of 60/70 grade bitumen which will be supplied by the department at the rate and place as specified in the special condition appended including heating the bitumen in bitumen boilers heating the aggregate and mixing them with bitumen in central hot mix plant for premix carpet, rolling by 80/100 KN power roller for premix carpet and spreading the seal coat mix over the premix carpet and rolling by 80/100 KN power roller separately including labour charges for spreading the mix for premix carpet and seal coat including hire and fuel charges for bitumen boiler minimix plant and power roller and hire charges for all other tools and plants employed etc. complete asper MOST specification 509 & 513 (III revision). Using paver machine.

Filling with US Gravel in layers of not more than 15 cm thick for side berms of the road including 100% consolidation with power roller etc., complete

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

K.PONNAMBALAM