Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹6.1 LAdmitted-Finance | -15.06% | ₹6.1 L | L1 | Admitted-Finance |
| 2 | L2₹6.3 LAdmitted-Finance | -12.55% | ₹6.3 L | L2 | Admitted-Finance |
| 3 | L3₹6.8 LAdmitted-Finance | -5.67% | ₹6.8 L | L3 | Admitted-Finance |
Tender Value
₹7.2 L
EMD Value
₹14,462
Closing Date
15 Dec 2025, 1:00 pmClosed
Executive Engineer
12, Cavalry Lane, Engineering Department, University of Delhi, Delhi-110007
Replacement of defective electrical fittings, flood light, street light , exhaust fan and other minor electrical maintenance works at Social Works Building and Hostel, University of Delhi
2025_DU_888443_1
CEET-7132
Open Tender
Electrical Works
60 days
North Campus
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
Registrar, University of Delhi
₹14,462
23 Jan 2026
4 Dec 2025
16 Dec 2025
4 Dec 2025
15 Dec 2025
4 Dec 2025
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
3 Module (100mmX75mm)
6 Module (200mmX75mm)
8 Module (125mmX125mm)
12 Module (200mmX150mm)
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel /PVC conduit including dismantling as required.
Group C
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
3 pin 5/6 A socket outlet
15/16 A switch
6 pin 15/16 A socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 25A modular socket outlet and 25A modular SP MCB "C" curve including connections, painting etc. as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Upto 35 sq.mm
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
Supplying and fixing of following sizes of heavy class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
Supply, installation, testing and commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Moter, Class of Insulation: B, 3 Nos. Blades, 30 cm long down rod, 2 nos. conopies, shackle kit, safety rope, copper winding, power Factor not less than 0.9, service Value (CMM/W) minimum 6.85, Air Delivery minimum 215 CMM, 350 RPM (Tolerance as per IS:374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temprature rise= 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50 Hz, single phase AC supply, earthing etc. complete as required.
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel / PVC conduit as required.
1x1.5 sq.mm
2x2.5 sq.mm
2x4 sq.mm
2x6 sq.mm
Supply, installation, testing and commissioning of pre wired, 70 watts, street light luminaire delivering> 100 lumen/ watts with PDC housing , 220-240V, 50 HZ on existing street light pole /wall including all accessories and connection etc. as required. Make Philips, CAT No. BRP032 P LED 75 CW SLR PSU GR SPD or equivalent Model of Thorn/ Trilux/ Philips
Supplying and fixing of street light pole box of size (250x200x100) complete with all necessary accessories including suitable clamps, bakelite sheet, brass screws, washers and 01 No. 10 amps SP MCB ( single pole miniature circuit breaker) inclusive of making electrical connections as required.
Supply, installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design , 18 watts, 2100lm, 50000 burning hours, size 1200mm complete i/c accessories etc. directly on ceiling / wall, including connection with 1.5 sqmm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips make, CAT No. TMC 502 1XT- LED 22W, Tube equivalent to Philips make, CAT No. MAS LED tube 1200mm 18W 856 TBI-2100 lm
Supplying, fixing and laying of one number PVC insulated and PVC sheathed/ XLPE aluminium armoured conductor power cable confirming to 1.1 KV grade of following size direct in ground including excavation, sand cushioning , protective covering, refilling the same etc. as required. 4c X 16 sq. mm `
Supply, installation, testing and commissioning of pre-wired double box type fitting with two no. LED tube of forsted cover design, 18 watts, 2100lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling / wall, including connection with 1.5 sqmm FR LS PVC insulated , copper conductor cable and earthing etc. as required. fitting equivalent to Philips make, CAT No. TMC 502 2xT -LED 22W Tube equivalent to Philips make, CAT No. MAS LED tube 1200mm 18W 865 T8I-2100lm
Supply, installation, testing and commissioning of pre-wired 150 watts, flood light pressure die cast aluiminium housing with high impact resistance (IK07) glass cover IP66 protection, 130lm, /w, 220-240V, 50 Hz on existing street light pole/ wall incluiding all accessories and connection etc. as required. Philips make CAT No. BVP 192 LED 177CW NB FG A1 PSU GR or equivalent Model of Thorn/ Trilux
Supply, installation, testing and commissioning of one no. LED tube 18 watts complete as required. Tube equivalent to Philips make Cat No. LED PL-L, 18W 6500K 2G11
Supply, installation, testing and commissioning of one no. LED tube of frosted cover design, 18 watts , 2100 lm, 50000 burning hours, size 1200mm in existing single box or double box fittings complete as required. Tube equivalent to Philips make CAT No. MAS LED Tube 1200mm 18W 865 T8I -2100lm
Supply, installation, testing and commissioning of 12 inch heavy duty, AC, single phase 230 volt 50 Hz 1400 RPM, steel body exhaust fan in the existing opening, including making good the damage, cable connection, etc. as required.
Supply, installation, testing and commissioning of 15 inch heavy duty, AC, single phase 230 volt 50 Hz 1400 RPM, steel body exhaust fan in the existing opening, including making good the damage, cable connection, etc. as required.
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.47 MB
BOQ_933814.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid