SPL REPAIR TO OR BLDG NO P-54 AND P-5 AT NIYARI AND TANGDHAR UNDER THE AOR OF GE 874 EWS.

Amount

Demolition of brick work or stone masonry built in cement mortar complete all as specified and as directed.

M&L brick work with old size bricks, straight or curved on plan exc 6m radius, in cement mortar 1:6 complete all as specified and directed.

All as per item as above but except brick complete all as specified and as directed.

Taking down cement plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished over and smooth w/o using extra cement including mixing of water proofing compound. Note:- Water proofing compound to be paid separately under respective item.

Supply only integral water proofing compound complete all as specified and as directed.

M & L for rendering 15mm thick on stone masonry concrete surfaces or other than fair faces of brick work or on one side of lathing in CM 1:6 finished over and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished over and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed. Note:- Water proofing compound to be paid separately under respective item.

M&L for 6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including Gli 6mm adjustable suspender of required length of any description (Note: The design and specification of the ceiling board to be approved by user/AGE/GE) complete including taking down existing unserviceable false ceiling complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded aggregate) for copping, including weathering slightly rounded or chamfered using form work (Straight or curved) complete all as specified and as directed.

M & L for applying two coats of cement base paint including preparation of newly plastered surface of wall complete all as specified and as directed.

M & L for applying one coats of cement base paint including preparation of old plastered surface of wall complete all as specified and as directed.

M & L applying two coats of oil bound distemper including preparation of newly plastered surface of wall over 3mm call care putty complete all as specified and as directed.

M & L applying one coats of oil bound distemper including preparation of old plastered surface of wall complete all as specified and as directed

M & L applying two coats of oil bound distemper including preparation of newly plastered surface of ceiling over 3mm call care putty complete all as specified and as directed

M & L applying one coats of oil bound distemper including preparation of old plastered surface of ceiling complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 25mm thick PCC 1:2:4 type B-0, using 12.5mm graded stone aggregate and 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

S & F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match in skirtings/dados etc including 15mm thick rendering in CM 1:4 complete all as specified and as directed

M & L 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillar, window cills, cooking plate form and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm and n exc 4 sqm sqm each with shutter (W/o taking off shutter from frame) complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm each (without taking off shutter from frame) complete all as specified and as directed.

M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and as directed.

S&F for mild steel work as in bands straps supports or stay for rain water ventilating pipe including bolt if required hook heavy for large gate hook and pintle hinges, large hasp and staple clamps, hold fast, wall tie hook for hanging fan plain angle cleat for screwing purlin cleat complete all as specified.

S&F for 35mm thick, 2nd class soft wood, plain framed panelled shutter (any number of panel) with panel of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fitted to chowkhats 35mm thick second class soft wood (Kail) complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame with wood free EPS at site as per specification and drawing complete all as specified and as directed.

S& F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S & F 250 mm long aluminum alloy anodized sliding door (boil type) and fixing clips of sheets cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and directed.

S&F pre-coated sheet type door spring, heavy type, 300 mm long including roller and roller plate complete all as specified and directed.

S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n exc 200 cu. cm each complete all as specified and directed.

S & F Mild Steel butt hinges 100mm long medium weight complete all as specified and directed.

S & F 200mm long aluminum alloy, anodized barrel tower boll of extruded section complete all as specified and directed.

S & F aluminum handles, cast type, anodized 150mm long complete all as specified and directed.

M & L for sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 in each pane, 3mm thick complete all as specified and directed.

M & L for figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane 3mm thick complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm including fixed complete all as specified and directed.

All as per item No 39 above but supply and fix in repair.

M & L for applying two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth complete all as specified and as directed.

M & L for applying one coat of synthetic enamel paint over steel surface over 10 cm width or girth complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths complete all as specified and as directed.

M & L for applying one coats of synthetic enamel paint including preparation of old wooden surface exc 11 cm width or girths complete all as specified and as directed.

M&L for cutting chases ,pinning in making good to facing where required and pointing in CM 1:3 to edges of landing, steps, cills , sunshades, shelves , lintel etc. and cutting chases for concealed water tubing etc and making good cutting n. exc 10 cm girth complete all as specified and as directed.

M & L for 15mm bore `medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed.

M & L for 20mm bore `medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed.

M & L for 15mm Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

M & L for Lagging to pipes 20mm bore used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and as directed.

S&F in repair bib taps long body 15mm dia Chromium Plated, fancy type screwed down for iron pipe and fixed complete all as specified and as directed.

S & F in repair ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F in repair for 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed) type complete all as specified and as directed.

S & F in repair of ISI marked 15mm bore stop valve, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair chromium plated shower rose 125 mm size with or without swivel joints any size including to fixing to steel pipe or union complete all as specified and directed.

S&F in repair CP SOAP DISH HOLDER including fixing with brass screws to wall complete all as specified and directed.

S&F in repair 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed.

S&F in repair Vitreous China white wash hand basin with pedestal white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI brackets 2 Nos embedded in CM 1:4 complete all as specified and as directed.

S&F in repairs vitreous China squatting pan Orrisa pattern size 580 x 440mm white with "P" and "S" trap front or back inlet etc including connection to trap and to flushing to pipe , anti syphonage pipe etc including provisioning of lime concrete complete all as specified and as directed.

S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified and as directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified and as directed.

S&F in repair for 6mm thick looking mirror of size as required with bevelled edge fixed with CP nuts and screws complete all as necessary items complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling of existing pipes complete all as specified and directed.

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing pipes complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor including dismantling of existing pipes complete all as specified and directed.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed.

S& F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed

S& F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed

S & F 75mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed

S & F 110 mm PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed

S & F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed

S & F 75mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed

S & F 110 mm PVC (SWR) junction double, (double T), equal or unequal complete all as specified and as directed

S & F 75mm PVC (SWR) reducers complete all as specified and as directed

S & F 110mm PVC (SWR) reducers complete all as specified and as directed

S& F 75mm PVC (SWR) vent cowl complete all as specified and as directed

S& F 110mm PVC (SWR) vent cowl complete all as specified and as directed

M & L for 1000 Litres rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks exc 250 but not exc 500 litres complete all as specified and directed.

S & F of for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S& F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

S& F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, crewed both ends for iron pipe and fixed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for cement concrete type F-2 1:7:12 using 40 mm graded crushed stone aggregate as in foundation filling and mass concrete for sunken portion complete all as specified and directed.

M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.

M& L for 25mm levelling course Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) including 15mm screed bed in CM 1:4 complete all as specified and as directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:3 finished over and smooth w/o using extra cement including mixing of water proofing compound complete all as specified and as directed. Note : Water proofing compound to be paid separately under respective item.

ACCESSIBLE ROOF/SUNKEN TREATMENTS :-APP TREATMENT :-M&L for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less then 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyester matt, make as approved consisting of a coat bituminous primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25'C temperature and viscosity 70-160 cps over the primer coat, the layer membrane shell be laid using butane troch and sealing all joints etc after preparing the surface complete as per standard practice as per manufactures instructions . The vital physical and chemical parameters of the membrane shell be under ;- (i) Joint strength in longitudinal and transverse direction at 23'C at 650/ 450 N/5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softening point of membrane shall not be less then 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only. Note : The contractor will carry out ponding test after application of APP treatment before claiming payment.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering/wall etc complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with tapping screws complete all as specified and as directed.

All as per item No 94 herein before but plain sheet.

Demolition of cement concrete (Un-reinforced) in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and as directed.

Dismantling wall and ceiling board of any description including cover fillets complete all as specified and as directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in wall/linings complete all as specified and as directed.

M&L for 6mm thick veneered decorative plywood (05 Nos of ply) grade-01 (with BWR resin) with decorative face veneers on the one face fixed with nails to timber frame works fixed in ceiling etc complete all as specified and as directed.

Dismantling of timber scantlings 40 sqcm and over in sec, in any position, in unframed/framed work complete all as specified and as directed.

M &L for second class soft wood as in scantling clean sawn fixed in position complete all as specified and as directed.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood complete all as specified and as directed.

S&F for 100mm long stainless steel butt hinges medium weight cold rolled complete all as specified and as directed.

S&F 300mm long aluminium alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminium alloy complete all as specified and as directed.

M&L for stone walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

M&L for 75mm thick plain Cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base flooring complete all as specified and as directed.

M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 3 sqcm & n exc 6 sqcm, second class soft wood (Kail) clean sawn complete all as specified and as directed.

M&L for plain fillets rectangular or triangular in section clean sawn secured with nails or brads exceeding 13 sqcm & n exc 25 sqcm, second class soft wood (Kail) clean sawn complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20 cmX20 cmX25 mm thick sat jointed and pointed in neat cement slurry in floor with grey cement and no pigments with 25 mm thick screed bed in CM (1:4) complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) 75 mm thick as in plinth protection in/subbase complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down MCB DB's complete with MCB's/Isolator etc removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed.

M&L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLSH insulated un-sheathed copper conductor single core multi stranded flexible cable (green color) as earth lead in and including cable 1100 volts grade including casing and capping/conduit (ISI marked) including sunk cast iron/pressed steel terminal boxes, junction boxes, other boxes and sheet of suitable sizes for mounting of switches, sockets, fan regulators, light fittings etc. covered with suitable plastic laminated sheet or PVC gang box 2 to 8 way as per site requirement including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

All as per item No 113 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on same board.

All as per item No 113 herein before but wiring with 1.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 3 pin 5 amps on independent board.

All as per item No 113 herein before but wiring with 4 sqmm copper wire (FR-LS-H) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S& F of Socket outlet 2 in 1, 3 pin, 6A complete all as specified and directed.

S & F switch socket combination 2 in 1,5A, flush type complete all as specified and directed.

S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed.

Supply and fix ceiling rose with earth terminal 2/3 connection, PVC/ polycarbonate, isolated body.

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection/ PVC/ polycarbonate, isolated body. complete all as specified and directed.

M & L for lamp holder, PVC/Polycarbonate type with cord grip cap suitable for batten fittings complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F distribution board single pole & neutral with 200 Amps rated bus bar, for double door IP-42 DB's ,made out of sheet steel enclosure, recessed type, factory made powder coated 4 way -240 volts suitable for housing MCB's and isolator's complete in all fixing material/ accessories etc complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32 Amps 10 KA 'C' curve series, all as specified and as directed by Engr -in-Charge.

S & F of MCB SPN, 240 volt, 32 Amp capacity, 10 KA, 'C' curve all as specified and as directed by Engr -in-Charge.

Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size 10 Sqmm 2 core including service bracket complete all as specified and directed.

M & L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

All as per item No 113 herein before but wiring with 2.5 sqmm copper wire (FR-LS-H) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board complete all as specified and directed.

S&F in replacement of XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V, fixed sunk/flush to the wall complete all as specified and directed.

Taking down carefully exhaust fan AC single phase any sweep, keeping in safe custody for refixing the same after point wiring complete all as specified and directed.

M/s Pall Constructions (BID ID -3470365)

M/S GHULAM AHMAD BABA (BID ID -3470103)

Bidder Name

M/s Pall Constructions

M/S GHULAM AHMAD BABA

M/S AK CONSTRUCTION