Development of Old Commissioner of Police Bungalow Campus as an extension of Mahabahu River Heritage Centre Phase II

Amount

External Electrification

Supply Installation Testing and Commissioning of Main LT Distribution panel as per design

Supply & Instalation of FeederPillar Type 1

Supply & Instalation of FeederPillar Type 2

Supply & Instalation of FeederPillar Type 3

Supply & Instalation of FeederPillar Type 4

Supply & Instalation of FeederPillar Type 5

Supply & Instalation of FeederPillar Type 6

Supply of 110mm Dia HDPE Pipe Pe100 PM10

Supply of 160mm Dia HDPE Pipe Pe100 PM10

Supply of 3.5 C 25 sqmm Al ar. Cable

Supply of 3.5 C 50 sqmm Al ar. Cable

Supply of 3.5 C 150 sqmm Al ar. Cable

Supply of 3.5 C 185 sqmm Al ar. Cable

SITC of Type A Hensel Make Model No. KF1610 G Junction Box

Supply of 3C 1.5 Sqmm Cu Un Armoured Cable

Supply of3C 2.5 Sqmm Cu Un Armoured Cable

Supply of 20mm HDPE Pipe

Supply of 5C 2.5 Sqmm Cu Un Armoured Cable

Supply of 25mm HDPE Pipe

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

upto 35 Sqmm

Above 35 sq. mm and upto 95 sq. mm

Above 95 sq. mm and upto 185 sq. mm

Supply Installation Testing and Comissioning of of following types of Light fittings:

EXTERIOR POST TOP BOLLARD 15W LED LIGHT

EXTERIOR FLOOR SURFACE MOUNT 9W LED ADJUSTABLE SPIKE LIGHT

EXTERIOR SURFACE MOUNTED 15W LED MEDIUM BEAM ADJUSTABLE LIGHT WITH TREE STRAP

EXTERIOR LINEAR BUILT-IN DETAILS 10W/M LED STRIP WITH PROFILE & DIFFUSER

EXTERIOR FLOOR RECESSED 15W/M LINEAR GRAZER WITH GLARE CONTROL SHIELD

EXTERIOR POST TOP 40W LED DIFFUSE BEAM LIGHT MOUNTED ON 2.4M HIGH POLE.

EXTERIOR POST TOP 3 HEAD 40W LED EACH MEDIUM BEAM LIGHT MOUNTED ON 6M HIGH POLE.

EXTERIOR WALL MOUNTED 10W LED WIDE BEAM DOWNLIGHT

EXTERIOR WALL RECESSED MOUNT 6W LED WIDE BEAM DOWNLIGHT

EXTERIOR WALL MOUNTED 15W LED DIFFUSED BEAM DOWNLIGHT

Supply Installation Testing & Commissioning of 125 kVA Silent type DG Set

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

SERVICE CONNECTION

Service Connection with 160 KVA load (All inclusive)

ICT CCTV

(A) Network Components (Active)

Supply L2 POE Switch: Gigabit fixed chassis in 1RU size. Includes 8 RJ-45 10/100/1G BaseT 2x1/10 Gig SFP , 90 watt POE budget .

Supply L2 POE Switch: Gigabit fixed chassis in 1RU size. Includes 24 RJ-45 10/100/1G BaseT 2x1/10 Gig SFP , 90 watt POE budget .

(B) Network Components (Passive)

Supply of SFP 1GE Single mode SFP module (1310nm,10Km,LC)

PVC encloser box

Supply , Installation ,Testing & Commissioning 3 mtr LC-LC Fiber Patch Cord

Supply of 9U outdoor Rack IP-67:Frame/450x500 / FM / Casters T2/Glass/Metal Door, Shelf/500, PDU 1Ph, 230V, 8A, IRP Fuse - 1.8KVA, ITE / Server Rack Air Circulation module/Door Mount/ 180CFM, Horz Cable Organiser/1U/Loop, Mounting Hardware-CR (Pack of 10)

12U Rack/500x550/CKD/Castor T2/19" Adp/Perforated Doors/Side Panels, Horz. Cable Organiser Box Type, Shelf/1000, Shelf/Key Board/19"Rty/1000, Mounting Hardware-CR (Pack of 10), PDU 1Ph, 230V, 32A, 12 x 5/15A IRP 16A MCB x 2 Circuites - 7.3KVA, ITE / Server Rack Air Circulation module/Tower Mount/360CFM, Cable Basket/36U/100/NRS1

a) 6 core single mode optical fiber cable.

b) SF/UTP CAT6 Cable (305 Mtr.)

a) 2 x 1 core 1.5 SQ.MM. heavy duty oxygen free audio copper cable (16 AWG)

(C) IP SURVEILLAINCE

Supply, Installation, Testing & Commissioning of 5MP H.265 NW IR Dome Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 2.8mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@5MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 20m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .

Supply, Installation, Testing & Commissioning of 5MP H.265 NW IR Bullet Camera, 0.04Lux (Color), 0Lux (B/W, IR LED on), 4mm fixed lens, ONVIFS,G,T, WDR 120dB, 30fps@5MP all resolutions (H.265/H.264), H.265, H.264, MJPEG codec supported, triple streaming with full configuration, defocus detection, Directional detection, Motion detection, Tampering, crossing line, alarm in & out , Micro SD/SDHC/SDXC memory slot (Max. 128GB), IR viewable length 20m or better, PoE, CE, FCC, UL , NDAA, BIS, ROHS .

Supply and installation of Enterprise Grade : 5 MP ip- PTZ 30x Zoom ,PoE+, 1/2.8" CMOS Sensor, 1080P@30fps, H.265, H.264, 150m IR, Speed 0.05°~400°/s,TVS 6000V protection, IP66, Waterproof Low Illumination: 0.002Lux, Starlight

Supply, Installation, Testing & Commissioning of 40CH NVR, support 12megapixel camera supported, recording bandwidth 256 Mbps , 4K video out on HDMI monitor support, Dual monitor video out support, H.265, H.264, MJPEG compression support, 8 internal HDDs , e-SATA storage support, ARB & Failover (N+1) support, P2P service (QR code connect) support, CE, FCC,ROHS, UL and BIS.

Supply, Installation, Testing & Commissioning of 4 TB HDD with 7200RPM

Supply, Installation, Testing & Commissioning of 55" 4K Ultra HD Display

Wireless Mouse with Mouse Pad

Supply & Installation of Waterproof PVC Square Junction Box for CCTV Cameras IP65 5x5

(D) P A System

Supply of Rock garden Speakers IP 67 Rated - 150mm / 4" Full Range Driver, Compatible with 100v Line Volt, Amplifier Power Requirement 20 watts - 16/7 Use - BG/Public Address

Digital 2 Channel Mixture Amplifier 500 W- having USB, AUX and Other music sources .

Supply, Installation, Testing & Commissioning of TableTop Gooseneck Microphone with On/Off Switch - Public Address / Emergency Announcement

(E) POWER BACKUP

Supply, Installation, Testing & Commissioning of 2 kva ONLINE UPS system with 15 minutes battery backup with single SMF battery bank retundancy mode compatible.16x 12V 65AH Battery bank . single phase in & sigle phase out.

19 inch 2U , 1KVA Rack Mountable LI Line Interactive UPS having 15 Min Backup . Builtin battery bank .

IRRIGATION

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100mm Dia

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm diameter S.W. pipe

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 300 mm dia. R.C.C. pipe

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

SITC of MFT (MULTI FLOOR TRAP) WITH ELBOW 75 DIA WITH JALI ALONG WITH SS PIPE FOR WATER DRAIN OUT JAMED WITH CONCREATE

SITC OF MULTI FLOOR TRAP AT DIFFERENT LOCATION INCLUDING CONNECION WITH EXISTING SWR PIPES

Rain water recharge pit as per the specifications mentioned in the drawing

4 HP Motor Boring pump for irrigation

STEEL CLADDING WORKS :

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

STEEL RAILING WORKS :

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

STEEL DRAIN COVER :

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

TOILET BLOCK

Earth work in exacavation in trenches for foundations land for pipes cables etc. in ordinary soil ( loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavaated earth as directed by the Engineer i/c with in a lead of 50m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and injecting chemical emulsion for preconstructional entitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduits etc, complete (plinth area of the building at ground floor only shall be measured as per I.S 6313 ( Part II 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or Chloro Pary Phas will be used. The rate of application of chemical emulsion shall be as follows: (1) Treatment for masonary & foundation 5 liters per / 100 sqm. (2) Back fill in immediate contact with foundation 7.5 liters/100sqm. (3) Treatment of top surface of plinth filling 5 liters/ 100sqm. (4) Treatment junction of wall and the floor 7.5 liters/100sqm. (5) Treatment of soil along external perimeter of building 7.5 leters/100sqm. (6) Treatment of soil under apron along external perimter 5 liters /100 sqm. P.W.D. Ch-8- S.No. 1

Providing & laying cement concrete 1 : 4 : 8 ( 1 cement : 4 Coarse sand : 8 graded stone ballast 40mm nominal size) in foundation and plinth/under floors and curing complete, including cost of form work in foundations & floors. P.W.D. 281

P.C.C.(1 : 2 : 4) in fixing of Hold fast on Door , Window & Ventialtor P.W.D. 279

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 5.33.1 All works upto plinth level 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

All works above plinth level upto floor V level 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

Mild Steel or iron in plain work such as reinforced concrete or reincorced, brick work (when not included in anover all rates) wrought to requrired shape as necessary including bending for proper completion of the work and includng supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. P.W.D. 504

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Bitumen painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ about 1.70 kg/ Sqm. Inclucing cost of fule if any. P.W.D. ch-7 new item 1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) P.W.D. 305

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand)

Providing & Fixing of M.S. Angle Iron Door Choukhat. P.W.D. 502b

25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. D.S.R. 9.147B.1

6 mm thick clear heat strengthened glass 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). D.S.R. 9.7.7.2

P/L 12 mm thick plaster 1 : 4 (1cement : 4 fine sand 1.25 F.M.) Mortar in Fair face of wall

P/L 15 mm thick plaster 1 : 4 (1cement : 4 fine sand 1.25 F.M.) Mortar in Rough face of wall

Making Drip Course in sun shade or FACIA as per direction of engineer-in-charge including supply of all materials, labour etc. required for proper completion of the work. P.W.D. 600

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. dsr 8.31

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. D.S.R. 11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

Finishing walls with Acrylic Smooth Exterior Paint required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. P.W.D. 13.46.1

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. dsr 13.80

Destermpering Two coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give on even shade over Y including a priming coat with cement primer of approved brand and manufacture such as Barger, J & N Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of paris or or approved synthetic material and papered smooth including cost of materials.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. P.W.D. SOR 8.2.2 Granite stone slab colour black, Cherry/Ruby red 8.2.2.2 Area of slab over 0.50 sqm

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. DSR 8.5

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.2 Granite work

P/L C.C. 1 : 2 : 4 flooring 40 mm thick in Apron with neat cement finish. 600mm wide

P/Fixing of Glass stip (35x4) in Apron Floor

S/F oxidized iron Sliding Bolt (300x16mm)

S/F oxidized iron Tower bolts (250x10 mm)

S/F oxidized iron Tower bolts (200x10 mm)

S/F oxidized iron Handles (125mm)

Providing and fixing lSI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: 75x45x3.2mm

Providing & fixing white witreous china water closet squatting pan I.S.I.marked (Indian type W.C. pan) with 100 mm. Sand cast irom P or S trap. 10 /12.5 litrs PVC low level flush pipe with fitting & clamps, 20 mm overflow pipw with specials and mosquito proof coupling of approved municipal design,including painting of fittings and brackets, cutting & making good the wall & floors wherever required: (a) Orissa Pattern W.C. Pan of size 580 x 440 mm with integral type foot rests flush pipe and overflow arrangement.

Providing & fixing white vitreous china wash basin with C.I. brackets painted white, 15 mm. C.P.brass chain with rubber plug, 32 mm C.P. brass waste of standerd pattern including cutting & making good the walls wherever required 17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing & fixing white viterouschina pedestal type water closet (europen type) with seat and lid 10 liter low level flusing cistem with fittings & C.I / M.S. Brakets, 40 mm fluse bend, overflow arrangment with special of standard mark and mosquito proof W.C. pan with I.S.I. marked white solid plastic seat

Providing & fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with C.I. / M.S. brackets standard flush pipe and C.P. brass spreaders with brass unions and G.I.clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. Range of two urinal basin with 5 liter P.V.C. automatic flushing cistern.

P/ fixing flexible P.V.C. waste pipe for sink, wash basin & urinal basin including P.V.C. waste fittings complete (a) 32 mm dia

SOIL WASTE & VENT PIPES AND FITTINGS - II

Providing & Fixing Soil Waste pipe

75mm dia

110mm dia

P/ fixing P.V.C. traps of self cleaning design with sand iron screwed down or hinges trating with or without ventarm complete including cost of cutting & making good the walls & floors.(a) 100 mm inlet & 75 mm outlet

P/ fixing of M.S. holder bat clamps of approved design to P.V.C. pipe embedded in and including cement concrete blocks 10 x 10 x 10 cm of 1:2: 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc.

(a) for 100 mm

(b) for 75 mm

P/ fixing stainless steel jali (grating) with or without hole for waste pipe for floor / mahani trap.

P/F of Bevelled edge Mirror 600x450 mm

P/F of C.P. Shop Tray

WATER SUPPLY PIPES & FITTINGS - III

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.

15 mm nominal bore.

20 mm nominal bore.

25 mm nominal bore.

32 mm nominal bore.

Providing & Fixing CPVC ball Valve

15mm dia

20mm dia

25mm dia

P/ fixing I.S.I. Marked C.P. brass bib cock 15 mm with flange of approved quality including threading the pipe etc. for completion of work.

(a) short body bib cock

(b) long body bib coak

P/ fixing I.S.I. marked C.P. brass angle valve 15 mm with flange of approved quality including threading the pipe etc. for completion of work

(a) 15 mm nominal bore

P/ fixing 45 cm long unplasticised P.V.C. connection pipe with brass unions.

(a) 15 mm nominal bore

Constructing brick massonary manhole with 75 class designation F.P.S. bricks in cement mortar 1 : 5 (1 cement : 5 fine sand) R.C.C top slab with 1: 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) foundation concrete 1 : 4 : 8 (1 cement : 4 coarse sand : 8 grade stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size) neat cement complete as per standard design.

(a) Inside size 45 x 45 x 45 cm deep including C.I. cover with frame 455 x 610 mm internal dimension total wt. of cover & frame to be not less than 38 Kg. (Wt. of cover 23 Kg. & frame 15 Kg.)

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

P/F Water storage tank make SYNTEX including all fitting and labour.

OVERHEAD WATER TANK

Earth work in exacavation in trenches for foundations land for pipes cables etc. in ordinary soil ( loan clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavaated earth as directed by the Engineer i/c with in a lead of 50m.

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Providing and laying in cement concrete 1:4:8 (1 cement:4 cosrse sand :8 graded stone aggregate 40mm nominal size) and curing complete, including cost of form- work, in foundation and floors. (PWD- 273)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. 5.33.1 All works upto plinth level 5.33.1.1 Concrete of M25 grade with minimum cement content of 330 kg /cum R.C.C Column Footing

All works above plinth level upto floor V level 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum

All works above floor V level 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg /cum Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof.

Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. dsr 5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and struts dsr 5.9.6

Extra for shuttering in circular work (20% of respective centering and shuttering items) D.S.R. 5.9.14

Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers dsr 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roof , landings, balconies, acessess platform dsr 5.9.3

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) D.S.R. 5.11.1

Centering and shuttering including strutting, propping etc. and removal of form for stairs (excluding landing) except spiral staiircase dsr 5.9.7

Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates) wrought to required shape as necessary including bending for proper supply of steel its wastage bend hooks and suthorised over l

M.S. work in Stair main hole cover made out of 40x40x5 angle & MS sheet 18 guage

M.S. Railing made out of MS angle 40x40x5 mm & 15mm dia GI Pipe.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

P/L C.C. 1 : 2 : 4 flooring 40 mm thick in Apron with neat cement finish. 600mm wide

P/Fixing of Glass stip (35x4) in Apron Floor

Painting 1st coat over priming coat (but excluding cost of priming coat_ on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10 sqm. In area white superior synthetic enamel such as LUXOL3, Hi-gloss apcolite supe

Finishing walls with Acrylic Smooth Exterior Paint required shade on undecorated wall surfaces (two coat) overone and including one coat white cement primer to give an even shade after thoroughly brushing the surface to powdered materials including curing and cost of all materials. P.W.D. 13.46.1

Cost for rising main pipe line.

cost for Distribution system.

Cost for water meter gauge.

Cost for earthing.

RCC WORK, BRICK WORK AND GRANITE WORK

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m., All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:, Cement mortar 1:4 (1 cement : 4 coarse sand)

12 mm cement plaster of mix : 13.4.1 1:4 (1 cement: 4 coarse sand)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size de rived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.& above, Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22.6

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 25 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 25 mm thick Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :, 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 5.9.1

LANDSCAPING

Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment)

Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).

Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately)

Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charg

Surface dressing of the ground including removing vegetation and in?equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. 2.28.1 All kinds of soil

Fine dressing of the ground

PLANTATION

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water)

Trees Plant digging pit 3 ft x 3 ft

Shrubs & Bamboo Plant digging pit 1.5 ft x 1.5 ft

Hedge Plant /Ground cover

LAWN-READYMADE CARPET

TREES

Alstonia scholaris multi branching height 3m. in bag size 25 cm

Cassia javanica height 3m. in big poly bag size 25 cm

Delonix regia (Gulmohar) multi branching, height 3m. in big poly bag size 25 cm

Plumeria dwarf pink height 3m. with 3-4 branches and thick stem in big size HDPE ba

Michelia champa (Golden Champa) height 3 m. in earthen pot size 25 cm

samanea saman height 3 m cm. in big poly bag size 25 cm

bottle brush Callistemon pollandi height 3 m in big polybag size 25 cm

Bauhinia blackeana(Kachnar) height 3m. in big poly bag size 25 cm

Millingtonia hortensis height 3m. in big poly bag size 25 cm

Terminalia mantali var height 3m. in big hdpe bag

Plumeria alba dwarf height 3m. with 3-4 branches and thick stem in big size HDPE bag

Lagerstroemia thorelli height 3m.in big poly bag size 25 cm

Ashoka /Saraca indica height 3m.in big poly bag size 25 cm

Grevelia robusta height 3m.in big poly bag size 25 cm

Spathodea campanulata height 3m. in big poly bags size 25 cm

Accacia catechu /Khair height 3m. in big poly bags size 25 cm

Butea monosperma /Palas height 3m. in big poly bags size 25 cm

Fius religiosa /Pipal height 3m. in big poly bags size 25 cm

Salix babylonica height 3m. in big poly bags size 25 cm

Prosopis cineraria /Shami height 2m. in big poly bags size 25 cm

Ficus racemosa /Gular height 3m. in big poly bags size 25 cm

FLOWERING,FOLIAGE,SHRUBS . Planting as per planting scheme and follow up maintenanace for 30 days only. During this period any mortality will be replaced free of cost.

Alamanda dwarf well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot

Barleria white well developed with fresh and healthy 30 to 45 cm ht., with bloom in 20 cm Earthen Pot/Plastic Pot

Bougainvillea named variety, Thima / Marry palmar, . well developed with fresh & healthy bushy plant in full bloom 75 to 90 cm ht. plant in 40 cm

Calathea lutea well developed with fresh & healthy bushy plant 60 to 75 cm ht. plant in 25 cm poly bag

Crossandra well developed with fresh & healthy bushy plant in full bloom 45 to 60 cm ht. plant in poly bag

Galphimia gracillis well developed with fresh & healthy bushy plant in full bloom 45 to 60 cm ht. plant in poly bag

Nymphea thai var in chali pot , full bloom

Pentas well developed with fresh & healthy bushy plant in full bloom 30 to 45 cm ht. plant in poly bag

Plumbago capensis well developed with fresh and healthy 30 to 45 cm ht., with bloom in Earthen Pot/Plastic Pot

Tecoma gaudichaudi of height 90-105 cm.,bushy in big size HDPE bag

Tecoma maria of height 60-75 cm. branched in earthen pot of size 20 cm

Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pot / poly bag

Jatropha pandurifolia well developed with fresh and healthy 30 to 45 cm ht., with bloom in Earthen Pot/Plastic Pot

Nerium oleander (kaner) of height 60-75 cm. with 5-6 branches in poly bag of size 25 cm

Acalypha macrophyla red well developed with fresh & healthy 30 to 45 cm ht. plant in 20 cm size Earthen Pot/ Plastic Po

Bauhinia acuminate height 90-120 cm. in big poly bag size 25 cm

Cestrum nocturnum (Raat ki Rani) of height 60-75 cm. with 4-5 branches in bag of size 25 cm

Heliconia bicolor Diana well developed with fresh and healthy 60 to 75 cm ht., with bloom in Earthen Pot/Plastic Pot

Heliconia rostrata well developed with fresh and healthy 60 to 75 cm ht., with bloom in Earthen Pot/Plastic Pot

Schefflera high colour having ht. 25 cm to 30 cm, well developed with fresh & healthy foliage in 25 cm size of Earthen pot / Plastic pot.

Mussaenda erythrophylla (Rosea) of height 90-120 cm. multi branched in earthen pot of size 25 cm

Beloperone species well developed with fresh and healthy 60 to 75 cm ht., with bloom in Earthen Pot/Plastic Pot

Eranthemum red well developed with fresh and healthy 60 to 75 cm ht., in Earthen Pot/Plastic Pot

Ixora singaporensis well developed with fresh & healthy bushy plant in full bloom 60 to 90 cm ht. plant in poly bag

Justicia gendarusa red well developed with fresh & healthy bushy plant in full bloom 45 to 60 cm ht. plant in poly bag

Calliandra emarginata

Graptophylum

Loropatum rubra

Gardenia jasminoides

Murraya exotica

Pink jasmin

Phyllanthus nevosus

Brunfelsia calycina

Turnera elegance

Acalypha hispida

Heliconia psittacorum

Hibiscus

Hemigraphis colorata

GROUND COVER follow up maintenanace for 60 days only. During this period any mortality will be replaced free of cost.

Hamelia patens dwarf of height 60-75 cm. with 6-8 branches in poly bag of size 25 cm

Hymenocallis littoralis full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Lantana camera red full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Lantana purple full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Clerodendrum inerme having ht. 25 cm to 30 cm multi branched in 25 cm size of Earthen Pot / Plastic Pot

Ruelia full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Spathoglotis in 15 cm size of Earthen Pot / Plastic Pot.

Dracaena Rosea having ht. 30 cm & above with 8 to10 leaves, well developed, fresh and healthy in 20 cm size of Earthen pot / Plastic pot

Neprolepis fern well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot / Plastic Pot

Pleomle ‘Song of India’ variegated having ht. 30 cm to 45 cm, well developed, fresh & healthy foliage with bright leaves in 20 cm size of Earthen pot / Plastic pot

Rhoeo full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Wedelia chinensis,full of leaves in 15 cm size of Earthen Pot / Plastic Pot.

Costus woodii full of leaves height 45 cm, in 15 cm size of Earthen Pot / Plastic Pot.

Ipomoea (Golden leaves),with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot

Ixora chinensis bangalore pink with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot

Enhydra flucturas with healthy root system

Ipomea aquatia with with healthy root system

Typha angustifolia with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot

Thalia dealbata with fresh and healthy leaves in 15 cm size of Earthen Pot / Plastic Pot

Acorus calumus with healthy root system 7 cm pp bag

Vetiver rooted cuttings

Rain lily

Aphelandra squarrosa

Anthurium giant

Philo selloum big

Dianela

Syngonium butterfly

Jasminum pubescens

Alpinia zerumbet Var (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot.

Screwpine

Ipomea purple

BAMBOO follow up maintenanace will be 60 days from the date of completion.

Bamboo Buddha valley variety with umbrella shape plant having 120 to 135 ht. plant with fresh & healthy foliage well developed in 40 cm Cement pot multy branch, bushy plant

Bambusa vulgaris -Bamboo Thai , plant having 120 to 135 ht. plant with fresh & healthy foliage well developed in 40 cm hdpe bag , bushy plant

Extra cost to be added

Transportation

SLOPE STABILIZATION

Supplying and installation of Gabion facia unit with integrated tail as secondary reinforcement of length 2m that is made of mechanically woven, double twisted, hexagonal shaped wire mesh, Mesh type 10x12 as per IS 16014:2018, having D=100mm with tolerance of +/-10%, wire dia ID/OD 2.7/3.7mm, Zinc+10% Al Alloy+Polymer class A coated, mechanically edged/selvedged and shall have minimum 10 numbers of mesh openings per meter of mesh perpendicular to twist, with partition at 1 m interval etc. (exclusive of supply and filling of stones) complete as per detailed technical specifications attached and as directed by Engineer-in –Charge. Size of Gabion Facia Units 3m x 3m x 1m (LxBxH).

Supply and installation of polyester needle punched non woven geotextile as filter media behind Gabion/Reinforced soil wall, behind gabion fascia , as per MoRTH 700 Type-III geotextile. The width of geotextile roll shall not be less than 4.5 m, at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials, labour etc. complete and as directed by Engineer - In - Charge.

Supplying and laying drainage composite for use behind walls, between two different fills etc. having three dimensional composite with thermobonding a draining core having “N” configuration in extruded monofilaments of minimum thickness 8mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm charactersitic opening size (O90) of 150 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, Geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 28 kN/m, with mass per unit area of 1400 gsm, having minimum creep reduction factor of 1.15 for 100 years life at 100 kPa, at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials, labour etc. complete as per detailed technical specifications and as directed by Engineer - In - Charge.

Supply and installation of boulders of 150 mm to 250 mm tying with lacing wires, placing of geotextile at the back side etc. as directed by engineer in charge.

Backfilling along with structural fill behind the Reinforced Soil wall with local good quality soil/aggregates as per approved drawings and directed by engineer in charge

Providing & making Gabion structure with Mechanically Woven Double Twisted Hexagonal Shaped Wire mesh Gabion Boxes as per IS 16014:2018,MORTH Clause 2500, of required size, Mesh Type 10x12(D=100 mm with tolerance of ±2%), Zinc+10% Al alloy+PVC coated, Mesh wire diameter 2.7/3.7mm (ID/OD), mechanically edged/ selvedged with partitions at every 1m interval and shall have minimum 16 numbers of openings per meter of mesh perpendicular to twist, tying with lacing wire of diameter 2.2/3.2mm(ID/OD), supplied @3% by weight of Gabion boxes, as per drawing, all complete as per directions of Engineer-incharge. (Excluding boulder)

Excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge.DSR 2021 (2.6)

Supply and installation of Green facia unit with three dimensional erosion control mat and welded mesh panel and integrated tail as secondary reinforcement of length 3m that is made of mechanically woven, double twisted,hexagonal shaped wire mesh ,Mesh type10x12,having D=100mm with tolerance of +/-2%,wire dia ID/OD 2.7/3.7 mm, Zinc+10%Al Alloy+Polymer coated, MORTH specification No 3100 along with local seeds for vegetation as directed by Local Horticulture Dept., Assam. Size of Green facia Units 3X2X0.83 M

Supply and installation of CE certified three dimensional erosion control mat made of polypropylene polymer of minimum mass per unit area 420 gm / sqm extruded on to a mechanically woven double twisted hexagonal shaped steel wire mesh (as per EN 10223-3)made up of 2.7mm dia having a Polypropylene polymer density min. 900kg/m3. Steel wire and mesh type 8 x 10 having Zn-Al 5% Class A coating as per EN 10244-2 longitudinally weaved during manufacturing with steel cable of 8 mm diameter at a spacing of 1 m. The composite shall have a longitudinal tensile strength of min 70 kN/m and punch resistance is min 75kN with min. nominal thickness of 11mm. Including fixing of U pins of 8mm diameter of depth 500mm at 1m c/c spacing, top support rope, bottom support rope, thimbles, U-clamps, etc at easily accessible location including top and bottom, with all leads and lifts, manpower and machinery, materials,labour etc. complete and as directed by Engineer - In - Charge.

Providing and fixing of continuous threaded Anchors (32mm dia, yield strength > 500 N/mm2) nut, washer plate, coupler for connecting bars with suitable corrosion protection coating for bar and accessories and full length grouting with admixture including all ancillary items for soil nailing as per detailed technical specifications and as directed by engineer in charge.

Removal of vegetation, bushes, shrubs in lower and upper section including stacking of useful material, disposing of material from slope within lead of 150 meter as directed by Engineer - In - Charge.

PANEL ROOM

Construction of Panel Room of Prefab size 30’L x 11’b x 8’h Single chali Single side panelling No false ceiling Dyna roof on top ,No flooring Windows - 2 nos,Double door - 1 nos,4 side wall and top Dyna roof with GST

FRP RAILING

30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames along with S.S. Base Plate

SUB STATION WORK

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m., All kinds of soil 2.8.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :, 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) 4.1.4

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level , 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) 5.1.2

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 5.9.1

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.& above, Thermo-Mechanically Treated bars of grade Fe-500D or more. 5.22.6

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:, Cementmortar 1:4 (1 cement : 4 coarse sand)`

AERATION SYSTEM

COMBO Unit 3.5 HP complete set (RIO Mixer 2 HP + STORMIX/ FORCE7 1.5 HP Aerator on single frame with floats assembly)

SPLASH CASCADE AERATOR 1.5 HP including float assembly

Packing, forwarding & Freight Charges upto Guwahati

Installation Supervision Charges

ELECTRICAL WORKS TO BE EXECUTED THROUGH APWD (ELECTRICAL)

Earthing with G.I. earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangements and watering pipe etc. with charcoal/coke and salt as required.

Earthing with G.I. earth plate 600mm X 600mm X 6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below groung level for conductor earth electrode. Including connection/termination with GI thimble etc. as required.

Cable

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Above 120 sq. mm and upto 400 sq.mm

3.5 crore 95 sq mm

3.5 crore 150 sq mm

3.5 crore 185 sq mm

3.5 crore 240 sq mm

3.5 crore 300 sq mm

DG SET

Supplying including installation, testing and commissioning of Air/water Cooled Diesel Generator set coupled to suitable alternator of 220/450 V, AC, 1/3-Phase 0.8 p.f. mounted on a 1) M.S. Fabricated base frame., 2) M.S. fuel tank of required capacity., 3) Residual Silencer.,4) Standard Control Panel.,5)Suitable batteries with lead.,6)First fill of lube oil.,7) Acoustic Enclosure complete with all accessories as specified and directed by the department conforming to IS comprising the Technical Specification..as per manufacturer. (RANGE FROM 5 KVA TO 625 KVA) Kirloskar green/bliss, Leyland, Volvo Penta, Perkinson, Mahindra, Greaves, Escort engine and Kirloskar,

LT Isolator Panel (400A) : DWG NO: 400A 4 Pole 36kA MCCB with Thermal Based with O/C, S/C Release -- 1 No….Incomer Spreader, Extended Rotary Handle, Aux. & Trip Contact Indicating Lamp --6Nos. CT, ratio : 400/5A, Class - 1, VA-15 ----1Set MFM Meter -- 1 No. 6A FP Miniature Circuit Breaker, 10kA ---1No.

LT Isolator Panel (1600A) : DWG NO: 1600A 4 Pole 50kA MDO Type ACB with Microprocessor Based O/L, S/C, E/F Protection Indicating Lamp -- 6Nos. CT, ratio : 1600/5A, Class - 1, VA-15 ----1Set MFM Meter -- 1No. 6A FP Miniature Circuit Breaker, 10kA --- 1No.

SHIFTING OF UTILITIES

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and raming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m All kind of soils

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 At Entry portion

Providing and laying stone dust for back filling. At Entry portion (Market Rate)

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. At Entry portion

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. All works upto plinth level Concrete of M25 grade with minimum cement content of 330 kg /cum

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Suspended floors, roofs, landings, balconies and access platform

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Supplying and fixing C.I. cover without frame for manholes : 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg frame of required shape and approved quality

Supplying, Installation testing and commissioning of the following supply febrication laying ,testing & commissioning of heavy grade IS marked & as approved make list black mild steel piping conforming to as per IS 1239/3589 (part-1)complete Fe410-"c" class MSERW black pipe ) for underground pipes with welded/flanged connection with saddles ,support ( all with screwed/welded joints) as required including pipe of shorter length, tapping connecting pipe,short or long bends ,specials like socket ,union nuts ,enbow ,reducer ,plugs Tees etc.complete to make the system operative as required by LFA Authorities ,the pipes will have to be laid and fixed in trenches . The work includes excavation in all types of soils and back filling , dewatering etc.making holes in bricks or RCC walls , slabs/roofs and making good the damages by bringing to the originsls conditions to the satisfation of the Architect and proving and fixing pykote(corrossion protection tape) including supply and application of pipe coating and spiral wrapping 4mm thick for underground piping (wrapping should have overlap of 15 to 20mm) etc Make complete as per ASTM standards/IS :10221 for corrossion protection of pipes for the underground installation.by LFA Authoritiesby LFA Authorities Note: The pipe installation has to be put to hydraulic test to 1.5 times the working pressure and as per latest applicable codes and standard before applying paint or pipe coating or wrapping etc. complete Make:TATA/APOLLO. PIPE FITTINGS:sant-h/unik/sk 600NB9.5MM THICK AND 49.72KG.WT/M Approx(underground)

600 mm dia. 10 mm thick (one no of pipe line)

300 mm dia. 6.5 mm thick (three no of pipe line)

200 mm dia. 5.4 mm thick

Sluice valve 300 mm dia.

600 mm dia MJ colour (Mechaniccal joint) DI

600 mm dia DI Tail piece

600 MM 900 MS BEND

600 MM 450 MS BEND

600 MM DIA FLANGE

300 mm dia MJ colour (Mechaniccal joint) DI

300 mm dia DI Tail piece

300 MM 900 MS BEND

300 MM 450 MS BEND

300 MM DIA MS FLANGE

300 MM DIA DI NRV

300 MM DIA MS NIPPLE(80 CM LONG)

200 MM DIA DI NRV

200 MM DIA DI SLUICE VALVE

200 MM DIA FLANGE

100 MM DIA DI CIDF SLUICE VALVE

100 MM DIA DI AIR VALVE

100 MM DIA FLANGE

150 MM DIA HOSE PIPE (4.5 m long) 15 kg pressure

NUTS & BOLTS 20 MM DIA FULL THREADED

3 MM THICK RUBBER GUSKET

RCC TRENCH

RCC HT Cable Trench ( Load Bearing Slab)

VERSHA TECHNOTRADE PVT LTD