SPECIAL REPAIRS TO LT PANELS AND OTHER ELECTRIC ITEMS AT ATC AND SPECIAL REPAIRS TO SMQ BLDG NO. 641 AT ARJAN ENCLAVE UNDER GE (AF) HASIMARA

Amount

Taking down existing unserviceable Outdoor / Indoor LT panel /APFC with existing accessories complete all as directed.

Taking down existing unserviceable TPN distribution box / SPD complete with MCCB/MCB complete all as directed.

S&F VTPN distribution board (IP-43), TPN-DPX 125 MCCB with provision of one No MCCB 125 Amps as incomer including provision of 08 Nos B Curve, SPN 32 Amp MCBs as outgoing double door (metal) type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link with MCBs with blank plate suitable for 4 way complete all as specified and as directed by Engineer-in-Charge. Make: L & T Cat No. DBVTL004DD or equivalent in Schneider/ABB/Legrand Note : Rates of MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.

Supply & fixing or Passing through pipe, XLPE insulated, armoured, electric power UG cable (Heavy duty) with aluminium conductor, 1100 volts grade, nominal cross sectional area 16 sqmm 4.0 Core including brass compression cable gland, terminal lug etc including taking down existing old unserviceable cable and testing complete all as specified and directed. Make:- Havells/Finolex/CCI/Polycab

All as per item No 7 above but size 70 Sqmm x 3.5 Core complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour including fixing material for fixing of pipe on wall/ ceiling / pole complete all as specified and directed by EIC. Make Dura line /finolex/Tele Rex /Rex

M & L for maintenance free Tripod earthing system (3 Nos per set) including fitting and fixing of 17mm x 3mtr copper bounded rod having pre-welded copper bonded connection clamp at top and M17 threaded at bottom for coupler attachments. Clamp head assembly, Pre-welded and copper bonded connection clamp, having provision to connect external cables & strips including provision of Electrogrip BFC (50 Kg) highly conductive resistivity lowering ground enhancement compound (Tested & certified by National Test House (Govt. of India Lab) as per IEC 62561-7) and ASTM G57-06 (for a resistivity of 0.244 ohms-mtr) with most advanced heavy duty polyplastic earth Inspection pit cover made of high grade polypropylene, these earth pit covers shall be light weight, unique design, lockable and unique design, the quality of raw material which makes earth pit cover shall be most ductile and heavy duty with incredible load bearing capacity complete all as specified and directed. Make:-OBO / JMB / JMV (Earthing), ENOV, Powertrack, Tirupati or equivalent make approved by E-in-C's Branch.

Supply and laying down conductor, ISI marked, 70 Sqmm, armoured PVC insulated, copper flexible cable stranded conductor including both end termination suitable size clamps etc from LA upto Earth pit terminal / test link complete all as specified and directed. Make : Havells / Plaza / Polycab / Finolex

S&F distribution board, 4 way, TP&N, single door including provision for three phase and neutral surge protection device suitable for protection against direct and indirect lightning surges with maximum discharge current 50 KA complete all as specified and directed. Make: As per cat part No AUSP123PN50 of Make : L& T for SPD and cat part No DBSPN004SD of Make : L &T or equivalent in Legrand/ Schneider/Indoasian.

Taking down chowkats or frame, n.exc 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames, exe 1.5 but n.exc. 4 Sqm in each with shutter (without taking off shutter from the frame) complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed.

Taking down steel window, ventilator of any description and size including guard bar etc complete all as specified and directed.

Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each and refixing in the same opening complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc stacking the serviceable bricks after removing mortar and cleaning for re-use and disposal of debris and rubbish to a distance n.exc 100m as directed by the Engr-in-Charge.

Dismantling timber scantlings 40 Sq.cm and over in section, in any position complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L for Brick work with sub class 'B' bricks, straight or curved to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for rendering 5 mm thick in cement mortor 1:3 on concrete surfaces as in ceilings and finishing surfaces even and smooth without using extra cement complete all as specified and directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified and directed.

M & L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

M & L for Pressed steel frames 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

M & L for Pressed steel frames 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed.

S & F Well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S & F 30 mm thick, factory made, Second class hardwood, glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, etc complete all as specified and directed in SSR Part I Section 8 clause 8.24 (b).

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

S & F Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay etc complete with glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel windows with side hung shutters including box type hinges with steel handle and steel peg stay etc complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F Steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed.

Taking down steel window shutter of any description and refixing the same after repairing, removing rusts etc including welding complete all as specified and directed.

M & L for Mild steel framed work such as grills, gratings, gates etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bar, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-410-0 Gde E-250 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S & F 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F 3 mm thick, figured glass, pin headed type, in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.

S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

S & F mild steel, 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Floor door stopper,150mm(Overall length of cover plate) of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S & F 150 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 100 mm size, Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S & F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S & F 75 mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S & F 125 mm long, Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, etc complete all as specified and directed.

S & F mild steel bands, straps, supports or stays of rain water, ventilating pipes including bolts, hooks (stay) for large gates, hook and pintel hinges, clamps, hold fasts, wall ties,flat iron fillets for securing wire mesh, wind tie, fan hook and similar work including necessary drilling bolting or riveting etc conforming to Fe – 290 Gde E – 165 complete all as specified and as directed.

M & L for plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding holdfast, bed block, cills, etc including necessary form work complete all as specified and directed.

M & L for 18mm thick, prelaminated wooden finish PVC particle board for cup board and fixed with and including necessary accessories etc complete all as specified and directed.

M & L for 12mm thick, prelaminated wooden finish PVC particle board for cub board and fixed with and including necessary accessories etc complete all as specified and directed.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F 75mm Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F 20 mm dia, aluminium, powder coated, curtain rod, fancy type complete all as specified and directed.

S & F aluminium powder coated bracket for curtain rod of 20mm dia, fancy type fixed to wall, fixed type complete all as specified and directed.

Demolition of existing sunken floor including PCC/ tile floor, lean concrete etc and disposal of debris and rubbish to a distance n.exc 100m complete all as directed by the Engr-in-Charge

M & L for cleaning the surfaces of sunken floor using wire brush, brooming down and washing down with water to remove dust etc and brushing with neat cement slurry @ 0.50 Kg/Sqm mixed with acrylic based polymer modifieed cementitou composite Pidifin 2K) @ 0.50 Kg/Sqm complete all as specified and directed. (Make: "Pidifin 2K" of Dr. Fixit and equivelant of make Pidilite/STP)

M & L for rendering 10 mm thick in sunken portion in cement mortar 1:3, mixed with integral water proofing compound with weight of cement as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M & L for plain cement concrete 1:5:10, type E-2 (using 40mm graded stone aggregate) as in sunken portion, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M & L for 25mm thick Plain cement concrete 1:2:4, type B-0, (using 12.5 mm graded stone aggregate) as in sunken portion complete all as specified and directed.

M & L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors etc, including 15 mm thick screed bed in cement mortor 1:6 and set & jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including dismantling of old damaged tiles complete all as specified and directed.

M & L for glazed, coloured, ceramic, tiles of size (450mm x 350mm/300mmx450mm) x 6 to 7 mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick bedding in cement mortor 1:4 and set & jointed in neat cement slurry & pointed in white or coloured cement to match with the shade of tiles including dismantling of old damaged tiles complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20 to 25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing & including 20 mm thick, screed bed in cement mortar 1:6 complete all as specified and directed.

All as per item No 71 above but on vertical surface of wall as in skirting/dado over 10mm thick cement plaster as in backing of tiles in CM 1:3 complete all as specified and directed.

Demolition of reinforced cement concrete in any position not otherwise specifically provided for complete all as specified and directed.

M & L for use & waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etcetc complete all as specified and directed.

M & L for use & waste of Formwork to chajjas, troughs and similar items including edges flat for rough finished surfaces of concrete complete all as specified and directed.

S & F TMT steel bars 10 mm dia and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S & F TMT steel bars 6mm to 8mm dia, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

M & L Reinforced Cement Concrete 1:1.5:3, type A-1 (Nominal Mix) (using 20 mm graded stone aggregate) as in beams, cantilevers, lintels over 1.5m span complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately)

M & L Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (using 20 mm graded stone aggregate) as in chajjas etc complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately)

M & L for Reinforced Cement Concrete 1:1.5:3, Type A-1 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately)

Taking up or down 15mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Taking up or down 20mm bore, Steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning as directed.

Supply, laying, connection and testing, 15mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Supply, laying, connection and testing, 15mm bore, concealed Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc including making good the disturbed surface complete all as specified and directed.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 81 above)

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete as directed. (Note: Serviceable pipe shall be reused as obtained from serial item No. 82 above)

M & L for Lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed.

S & F in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and directed.

S & F in repairs, vitreous China wash basin, size 550 x 400mm, white, flat back, with backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and directed.

S & F 500 litres capacity (Triple layer) rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position including taking down old unserviceable water tank as specified in SSR Part I and directed.

S & F in repair PVC over head tank cover suitable for 500 Litres capacity tank complete all as specified and directed.

S & F PTMT 20mm Nipple suitable for HDPE water tank.(Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks of capapcity 500 Ltrs and from mouths of circulating pipes, etc. using bleaching powder and washed with water including dismantling and reconnecting and refixing in position including writing date of cleaning with white synthetic enamel paint as "CLEANDED ON" complete all as specified and directed.

S & F 20 mm bore, Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight - 210 gms) complete all as specified and directed.

S & F in repair 32 mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends complete all as specified and directed.

S & F in repairs, 32/40mm dia flexible PVC waste pipe for wash basin/urinal complete all as specified and directed

S & F in repairs, stainless steel kitchen sinks made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs, 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S & F in repairs, 10 litre capacity, PVC valve less syphonic action type, flushing cistern, low level, white, with inlet, ball valve, flush pipe, float and handle including brackets complete all as specified and directed.

Fixing only in repair High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if anycomplete all as specified and directed.

S & F in repairs 20 mm bore, stainless steel chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and directed.

S & F in repairs, swivel shower of PTMT 15mm bore (minimum weight 40 gms) complete all as specified and directed.

S & F in repairs, 15 mm bore, bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, 15 mm bore, Stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.on independent board complete all as specified and directed.

S & F in repair 15 mm bore, angular stop valve, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs, Stainless steel, kitchen plate rack of size 0.75m x 0.78m as per existing design and specification or as approved complete all as specified and directed.

S & F in repair 75 mm bore, PVC (SWR) floor trap, with grating including jointing to waste pipe with solvent cement complete all as specified and directed.

S & F in repairs 40 mm dia, High density poly-ethylene pipes, (HDPE) of pressure rating 6 kgf/cm 2 laid as in waste pipe etc complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors, etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR), pipes single socketed in any length, with rubber ring joints, fixed to wall or laid in floors, etc complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 75mm bore, PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S & F in repair CP grating, 75mm dia, with or without waste hole, fixed to floor trap complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including demolition of old concrete complete all as specified and directed.

M & L for Plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in surface channel, drains etc complete all as specified and directed.

Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed.

M & L for preparing old decorated surfaces of walls, etc including cornices by brooming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling, etc by brooming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of white wash complete all as specified and directed.

M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M & L for preparing old decorated surfaces of wall, etc including cornces by brooming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of distemper oil emulsion complete all as specified and directed.

M & L for preparing old decorated surfaces of wall, etc including cornces by brooming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

M & L for Preparation of old painted wood and wood based surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja, etc including cornces by bromming down or by steel wire brushing, scrapping down smokes soot, moulds, moss and efflorscent salt and treating oil and greasy spot and applying two coats of cement base paint complete all as specified and directed.

M & L for preparation of old decorated external surfaces of wall, chajja, facia etc and applying one coat of water based acrylic weather proof exterior emulsion (exterior wall finish) paint complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall, chajja, facia etc and applying two coats of water based acrylic weather proof exterior emulsion (exterior wall finish) paint over a coat of primer complete all as specified and directed.

M & L for Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.

M & L for preparing surfaces of wood and wood based materials, steel and iron works, new or old of any description and girth treating small articles such as holdfasts etc area n.exc 0.10 Sqm each with tar or coal tar black paint complete all as specified and as directed.

M & L for Preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zine chrome primer complete all as specified and directed.

Taking down carefully unserviceable aluminium/copper point wiring (light, fan, socket or power) complete, (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc to be measured separately if found serviceable), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs, isolator, etc and removing from site complete all as specified and directed.

Taking down unserviceable sub-main wiring with rigid steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.

M & L for Point wiring with 1.5 Sqmm (nominal area), FRLSH PVC insulated, multistranded, single core, unsheathed, copper conductor cables drawn through and including PVC conduits Concealed in walls, ceiling etc with all fittings and accessories of PVC conduits (like Tee, bend etc.) complete fixed to walls/ceiling etc. with and including 1.5 Sqmm (nominal area) FRLSH PVC insulated, unsheathed, stranded, single core, copper cable green in colour as in earth continuity wire connecting to common earth point including cutting chases in brick walls for conduits and 1.6 mm thick mild steel sunken terminal boxes of suitable size with 3 mm thick hylum sheet top cover fixed with suitable size of brass screws for mounting switches, sockets, regulators etc complete for one light/fan/bell/buzzer point controlled by one, one way switches complete all as specified and directed by the Engr-in-Charge. (Note: Cost of cutting chases and making good of the same for concealed wiring shall deem to be included in the unit quoted rates)

All as per item No. 143 above but one light point controlled by two way switches, with cable 1.5 sqmm size complete all as specified and directed.

All as per item No. 143 above but one 5 Amps 3/5 pin switch socket combination on the same board with other switches complete all as specified and directed.

All as per item No. 143 above but one 5 Amps 3/5 pin, Switch socket combination on independent board complete all as specified and directed.

All as per item No. 143 here-in-before but wiring with cables of size 2.5 sqmm & cables of size 2.5 sqmm as continuous earth wire for one 15 Amps Switch socket combination on Independent board complete all as specified and directed.

S & F switch piano, 5 Amp single pole, flush type one way 230 volts complete all as specified and as directed.

S & F switch piano, flush type, 5 Amps, single pole, two way, 240 Volts complete all as specified and directed.

S & F Bell push, flush type, 5 Amps 230 Volts, complete all as specified and directed.

S & F Switch socket combination, 2 in 1, 5 Amps, flush type, 240 volts complete all as specified and directed.

S & F Switch socket combination, 2 in 1, 5/15 Amps, 240 volts, flush type complete all as specified and directed.

S & F Ceiling rose, 3 terminal, PVC/polycarbonate, isolated body complete all as specified and directed.

S & F Stepped type electronic fan regulator flush type complete all as specified and directed. (Make: Anchor, Model No. 14502 or equivalent make as per list of manufacturer)

S & F Ding-Dong,bell AC, 230 volts, single pole complete all as specified and directed.

S & F lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings including complete all as specified and directed.

S & F wall mounted slim LED batten, with extruded aluminium housing, with integrated LED driver with LED lamp, 9 Watt and connecting up complete all as specified and directed. (Make : Surya Cat No. SLE BT 10 and equivelant model of make as specified in list of manufacturer).

S & F wall mounted slim LED batten, with extruded aluminium housing, with integrated LED driver with LED lamp, 18 Watt and connecting up complete all as specified and directed. (Make : Surya Cat No. SLE BT 20 and equivelant model of make as specified in list of manufacturer).

M & L Sub main wiring with two runs of 4 sqmm (Nominal area) single core cable FRLSH PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn through concealed PVC conduits of suitable size including 4 sqmm (nominal area) single core, FRLSH PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point including PVC conduits of suitable size complete all as specified and as directed by Engineer-in-charge. (Note : (i) PVC Conduits, two run cables and one run of earth wire will be measured as one length. (ii) Cutting chases for concealed wiring shall be measured and paid seperately)

S & F factory made board distribution (DB) Double Door in sheet steel enclosure with common bus bar at incomming end, TPN, 4 way, 415 Volts suitable for fixing MCBs complete all as specified and directed. (Make : Legrand Cat No. 5076 90 or equivalent model as approved)

S & F sheet metal enclosure, double door MCB DBs, phosphatised, powder coated, single pole & neutral (SPN), 08 way, 240 Volts suitable for housing MCBs with din rail, neutral and earth bar in proper psoition complete all as specified and directed. (Make : Legrand, Cat No. 5076 41 or equivalent model as approved)

S & F MCB, TPN, 415 Volts, 63 Amps, "C" series, 10 KA breaking capacity complete all as specified and directed. (Make: Legrand Cat No. 4086 83 or equivelant of make as per list of manufacturer)

S & F MCB, SPN, 240 Volts, 40-63 Amps, 10 KA capacity 'C' series complete all as specified and directed. (Legrand Cat No. 4086 18-20 or equivelant of make as per list of manufacturer)

S & F MCB, SPN, 240 Volts, 6-32 Amps, 'C' series, 10KA capacity complete all as specified and directed. (Make: Legrand Cat No. 4086 09-17 or equivelant of make as per list of manufacturer)

S & F MCB, SP, 240 Volts, 5 to 32 Amps, 'C' Series, 10KA capacity, 240 Volts complete all as specified and directed. (Make: Legrand Cat No. 4085 87-95 or equivelant of make as per list of manufacturer)

M & L for Earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized steel earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-1 cover slab (reinforced with 8 mm dia TMT bar @ 15 cm C/C both ways and suitable handle of 8 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (light grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion complete all as specified and as directed by the Engineer-in-Charge. NOTE : An amount of Rs. 33971.00 on account of credit schedule for schedule 'A' part II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ANNI ENTERPRISE

T. P. ANIL KUMAR

M/S SARDAR MAL NAHATA

M/S MANODEEP CONSTRUCTION

M/S BISHAL ENTERPRISES

M/S RATHIN ENTERPRISES

M/S BIJAY KUMAR SHIVA