Renovation work of Room no. C-213 at Swasthya Bhawan, Jaipur.

Amount

Supply of Executive High back Revolving chair -: The cushioned seat assembly shall consists of insert moulded polyurethane foam upholstered with foam laminated mesh fabric the insert molded foam is assembled over a load bearing plastic seat cover. The back shall made up of two piece injection molded frame. The inner frame shall be upholstered with mesh fabric and mounted on the main assembly. Size of back shall be (W) 48.5cm, (H)-62.0cm & size of seat shall be (W)- 52.5cm x (D)-51.0cm.armrest shall be injection moulded with height adjustable up to 4.5+/- 0.5cm in 3 steps and width adjustable up to 20mm. The mechanism of chair shall have following features:360 degree revolving type, Front pivot Synchronic mechanism, Tilt tension adjustment, 3 position tilt limiter with AntiShock feature. Spine bracket shall made of Aluminum die cast piece connecting back with mechanism. Neck rest assembly shall made p of polyurethane foam upholstered with foam laminated mesh fabric. The neck rest assembly is mounted on the top of back. it can be adjusted up to 4.5+/-0.5cm up-down and has regular adjustment of 30 degree +/- 2. The chair shall be provided with pneumatic height adjustment which shall have stroke of 9.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black nylon. Overall dimensions of Chair shall be, Width of Chair - 71.0cm, Depth of Chair - 71.0 cm as measured from pedestal below. Height from ground - min 115.5 to max 131.0 cm. Seat height - min 45.0cm to max 54.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. Complete in all respectas per design and approved by Engineer in charge.

Supply of visitor chair, PU Arm Capsule. 25 mm round pipe used for back legs, and 25 mm capsule tubelar pipe used for front legs, hot press ply structure. Complete in all respect as per design and approved by Engineer in charge Visitor Chair

Supply of 2 seater table size 1828x914x750 mm, table top made of 18 mm preminated board with 2mm pvc edge bidding , the rear and both side also having 18mm preminated board with 2 mm pvc bidding. The table having 2 drawer and 1 openable shutter in the center of the table and having 2 keyboard tray with foot rest. The table shell be made as per drawing and design appproved by engineer incharge.

Supply and fixing of Wooden Rack of height 2'-6" and depth 18” of required Length with 1 no. Shelf made of 19 mm thick commercial block board laminated with 1.00 mm mica all edges of bord should be coverd by teak wood beading and all exposed area of bord ,ply should be painted,beading should be polished with all necessary hardware,locks,hinges etc. Complete in all respect per design and approved by Engineer in charge.

M/s SHRI BHAGYA LAKSHMI CONSTRUCTION COMPANY

SHREE SANMATI CONSTRUCTION

M/s SHRI BHAGYA LAKSHMI CONSTRUCTION COMPANY

FREEBIES HUB