AR and Mo Non Residential Building under Sub Division-I, CD, APWD, Car Nicobar

Amount

Supplying of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade as approved by the Engineer-in-charge.

Enamel Black Paint

Enamel White Paint

Supplying of Acrylic Smooth exterior paint of required shade as approved by the Engineer-in-charge.

Acrylic Smooth exterior paint White

Supplying of paint brush of superior make and approved quality

Paint brush - 4"

Paint brush - 3"

Paint brush - 2"

Supplying of Wire brush of superior make and approved quality as approved by the Engineer-in-charge.

Wire Brush

Supplying of White Cloth for decoration of ceiling in pandal as approved by the Engineer-in-charge.

Supply of G.I pipes complete with rope G.I. fittings and binding wires, clamps, for preparation of frame work of pandals as approved by the Engineer-in-charge.

25 mm dia. nominal bore

40 mm dia. nominal bore

50 mm dia. nominal bore

Supply of Thinner for diluting enamel paint as approved by the Engineer-in-charge.

Supplying of terracota paint for approved brand and manufacture of required colour to give an even shade as approved by the Engineer-in-charge.

Supply of Balloons of different colours of superior make and approved quality for decoration of around the Flag Mast area at various places under CD, APWD, Car Nicobar. (01pkts consist of 50 balloons) as approved by the Engineer-in-charge.

Supply of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge.

Supply of marine plywood of approved manufacturer of following sizes conforming to IS 710 of approved brands per the direction of Engineer-in-charge.

19mm thick Marine plywood conforming to IS:710