REP REPLACE OF ROOF SHEET VALLEY GUTTER FALSE CEILLING RCC ROOF TREATMENT MANGALORE TILES ROOFING INT EXT PLASTER AT DEPOT BN TEO CIW RECORD OFFICE PAO ORS APS AJITH VIHAR GP HQ OF BEG AND CENTRE UNDER AGE BR II IN GE C KIRKEE

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

Material and labour for 6mm thick asbestos cement, corrugated or semi-corrugated sheets as in roofs, walls etc fixed with L-type or J- type or cranked hook bolts complete all as specified and as directed.

As per Sl Item No. 2 above but except AC sheet. NOTE:- Serviceable AC sheets as obtained from Sl Item No. 2 above shall be re used.

Material and labour for Asbestos cement two- piece adjustable plain wing ridge 6mm thick fixed with L-type or J- type or cranked hook bolts complete all as specified and as directed.

Dismantling of plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed.

Supply and fix 0.63 mm Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers as in roofs, walls etc. with grade of zinc coating 275, fixed with L-type or J-type or cranked hook bolts in lieu of screws complete all as specified and as directed.

All as per Sl Item No. 6 here in before but except sheets. NOTE:- Serviceable GI sheets as obtained from Sl Item No. 5 above shall be re used.

Supply and fix for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix 0.63 mm plain galvanised, mild steel sheeting, as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with self tapping /coach screws complete all as specified and as directed.

Supply and fix rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410 W(Gde E-250) quality 'B' complete all as specified and as directed.

Supply and fix rolled mild steel work as in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St. 240 etc as in purlins complete all as specified and as directed.

Material and labour preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise described and applying two coats of synthetic enamell paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling of single layer Mangalore pattern or similar tiles as in roof coverings complete all as specified and as directed.

Supply and fix roof tiles, Mangalore pattern, inter locking at side joints laid dry complete all as specified and as directed.

All as per Sl Item No. 15 above but except tiles. NOTE:- Serviceable tiles as obtained from Sl Item No. 15 above shall be re used.

Supply and fix ridge or hip tiles to suit Mangalore pattern of roofing tiles bedded and jointed in CM (1:6) complete all as specified and as directed.

Dismantling battens for tiles shingle etc., of any size including tiling fillets spacing exc. 15 cm complete complete all as specified and as directed.

Supply and fix second class hard wood clean sawn battens at 30 cm centre to centre and sectional area exceeding 15 sq.cm and not exceeding 25 sq.cm complete all as specified and as directed.

As per item No 19 but except battens. NOTE:- Serviceable battens as obtained from Sl Item No. 18 above shall be re used.

Removing of old water proofing treatment, cleaning the surface of slab, clearing with wire brushes, removing dust, foreign material, rubbish off the site to a distance n.exc. 100m complete all as specified and as directed.

Material and labour for 10 mm thick screed bed in cement mortar (1:3) on RCC roof slabs mixed with approved water proofing compound as per manufacturers instructions finishing the surfaces even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed. NOTE:- WPC shall be measured and paid separately.

Material and labour for water proofing treatment over RCC slab by applying oil based bituminous primer to surface @0.25 Kg/sqm and laying 3mm thik APP modified water proofing polymeric membrane with 100 mm side and end lap having weight not less than 3.50 kg/ sqm, reinforced with non-woven polyster reinforced matt weighing not less than 160 gms/sqm polyster core having softening point not less than 1500oC, longitudinal tensile strength not less than 650 N/sq.cm, by torching method, applying a coat of solar reflective aluminium paint @ 0.15 Kg/sqm on membrance surface including 24 hrs ponding test complete all as specified and as directed.

Supply only integral liquid water proofing compound complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, AC sheet etc), any thickness including cover fillets complete complete all as specified and as directed.

Supply and fix interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm, spaced 1200mm centre to centre and cross Tee of size 25mm x 25mm x 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mm x 600mm and provide a secondary cross tee 25mm x1.4mm (of length 600mm) to be interlocked at the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm, aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including hangers of GI wire 6mm dia to be fixed by approved rawl plug, level, justers and screws etc., complete all as specified and as directed.

Material and labour for 8-9 mm thick Gypsum board / tiles for insulation and accoustic purposes, 600x600mm in size, fixed with nails to timber frame work or with staples on snap grid in ceiling complete all as specified and as directed.

Dismantling timber framed work as in scantlings 40 sq.cm and over in section, in any position complete all as specified and as directed.

All as per Sl Item No. 28 above but in fillets, rails, posts, rafters, purlins etc under 40 sq.cm in section complete all as specified and as directed.

Supply and fix second class soft wood, timber framed and fixed clean sawn as in scantlings complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking up or down steel tubing 15mm dia and connections including cleaning for refixing or removal to store all as directed.

Taking up or down steel tubing 20mm dia and connections including cleaning for refixing or removal to store all as directed.

Taking up or down steel tubing 25mm dia and connections including cleaning for refixing or removal to store all as directed.

Supply, lay and testing Galvanised iron pipe of 15 mm dia, medium grade, laid in floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Fixing only 15mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed. NOTE:- Serviceable pipes as obtained from Sl Item No. 32 above shall be re used.

Supply, lay and testing Galvanised iron pipe of 20 mm dia, medium grade, laid in floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Fixing only 20mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed. NOTE:- Serviceable pipes as obtained from Sl Item No. 33 above shall be re used.

Supply, lay and testing Galvanised iron pipe of 25mm dia, medium grade, laid in floors / fixed to wall with all fittings such as socket, bends, elbow, union etc., complete all as specified and as directed.

Fixing only 25mm dia medium grade Galvanised iron tubing with all fittings and fixed to wall, ceiling or laid in floors etc complete all as directed. NOTE:- Serviceable pipes as obtained from Sl Item No. 34 above shall be re used.

Cutting chases, pinning and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth in stone/ concrete block walls complete all as specified and as directed.

Supply and fix three layered rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks AC / PVC of any type and any position from site complete all as specified and as directed.

Supply and fix three layered rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks AC / PVC of any type and any position from site complete all as specified and as directed.

Supply and fix three layered rotational moulded polyethylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including dismantling water tanks AC / PVC of any type and any position from site complete all as specified and as directed.

Supply and fixed in repair provision of ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20 mm dia of the pipe complete all as specified and as directed.

Supply and fixed in repair provision of ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 25 mm dia of the pipe complete all as specified and as directed.

Disconnecting existing water tanks of capacity exc. 500 litres n.exc. 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. including writing date of cleaning on tank and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc complete all as specified and as directed.

Supply and fix 110mm bore, PVC (SWR) pipes, type 'B', single socketed, in any length with rubber ring joints, fixed to walls with PVC clamps fixed in repair complete all as specified and as directed.

Supply and fix 75mm bore, PVC (SWR) pipes, type 'B' , single socketed, in any length with rubber ring joints, fixed to walls with PVC clamps fixed in repairs complete all as specified and as directed.

Supply and fix PVC(SWR) bends, type 'B', for 110mm bore pipes, complete all as specified and as directed.

Supply and fix PVC(SWR) bends, type 'B', for 75mm bore pipes, complete all as specified and as directed.

Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and as directed.

Material and labour for plain cement concrete (1:11/2:3) type B0 using 12.5mm graded crushed stone aggregate as in padding in roof surface, filling and mass concrete complete all as specified and as directed.

Material and labour for applying one coat of tile guard of approved shade over any type of roof surfaces including preparation at any height, scaffolding and safety measures etc complete all as specified and directed. MAKE :- Asian paint or equivalent in Berger, Nerolac, Indigo paints

Removal of wild growth / plant / shurbs on external surface of building at any height up to roof level including removal upto roots and making good the disturbed surfaces in CM (1:4) complete all as specified and as directed.

Taking down cement plaster on wall /concrete surfaces etc including racking out joints, hacking for key, scrubing down with water etc all as specified and as directed.

Demolition of precast concrete block /brick work walling built in cement mortar complete all as specified and as directed.

Material and labour for precast cement concrete block masonry exceeding 10 cm in width built in cement mortar (1:6) of Gde C-5 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick/ PCC block masonry wall in CM(1:4) finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of primer complete all as specified and as directed

Material and labour for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall in CM(1:6) finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

Material and labour preparation of newly plastered wall surfaces of any description and applying two coats of oil bound emulsion distember over a coat of primer complete all as specified and as directed.

Material and labour for UPVC valley gutter/ rain water gutter, weather proof, scratch resistant minimum depth of gutter 200mm, including GI Clamp for fixing, center joint at two lengths joint, end cap, corner drop, center drop at required location complete all as specified and as directed. MAKE:- Euro Guard (Hysquare UPVC rainwater gutter) or equivalent.

Demolition of cement concrete of any description and in any positon not other wise specifically provided for complete all as specified and directed

Material and labour rendering 15 mm thick in CM(1:3), mixed with WPC as per manufacturers instructions and finishing the surface even and fair complete all as specified and as directed. NOTE:- WPC will be paid separately at supply only rates.

Material and labour for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre all as specified and as directed.

Supply and fix polythene film, 50 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sq.m all as specified and as directed.

Material and labour for plain cement concrete (1:5:10), type E2 using 40 mm graded stone aggregate any thickness as in filling in sunken floors complete all as specified and as directed.

Supply and fix PVC 40 mm dia pipe for spout in sunken floor etc complete all as specified and as directed.

Material and labour 40mm thick plain cement concrete type B1 (1:2:4) using 20 mm graded stone aggregate as in floors finished fair, even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick plain cement concrete type C2 (1:3:6), using 40mm graded stone aggregate as in plinth protection complete all as specified and as directed.

Cutting chases, pinning and making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete all as specified and as directed.

Demolition of stone slabs/flooring of any description laid bedded and pointed in any mortar all as specified and as directed.

Material and labour for steel grey / black or any approved colour of Granite slab, machine cut for 14-17 mm thick bedded and jointed with colour cement to match cut to shape required colour of granite as per approval of Engineer-in-Charge complete all as specified and as directed.

Supply and fix marble slab Baroda green 16-18 mm thick (pre grinded and polished ) bedded, jointed and painted with grey cement slurry including cutting and grinding /poishing 15mm thick in CM(1:6) bedding layer, the edges should be rounded and stone should be in one piece complete all as specified and as directed.

Material and labour for machine cut cudapah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing including screed bed or bedding layer 15 mm thick in cement mortar (1:6) for laying floor finishes. complete all as specified and as directed.

All as per Sl Item No. 77 above but on steps, risers, skirting over and including 10mm thick rendering in CM (1:4).

Material and labour for Kota stone slab flooring 18-22 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

All as per Sl item No. 79 above but on steps, risers, skirting over and including 10mm thick rendering in CM (1:4).

Rounding to edges of stone slabs of one edge, such as in steps, cooking platform and other similar situations complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles in store rubbish off the premises complete all as specified and as directed.

Material and labour for glazed vitrified ceramic tiles 9mm thick light shade, (square / rectangular) polished,in any type of design, digital pattern, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per Sl Item No. 83 here in before but in vertical surfaces / skirting 9mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular), digital pattern,wooden grain design area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) in any pattern and digital design,area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar complete all as specified and directed.

Material and labour for Glazed ceramic coloured tiles as in vertical surface 450 x 300 x 7mm thick or 600 x 300 x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete all as specified and as directed.

Material and labour for 25 mm thick plain cement concrete, type B1,(1:2:4) using 20 mm graded stone aggregate as in level course for receiving floor tiles complete all as specified and as directed.

Supply and fix powder coated anodised aluminium ventilator shutters, fixed type without sash bar including stainless steel wire cloth of 0.63 mm nominal dia and average width aperature 1.4 mm, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc.and fixed to stone masonry wall including demolition of RCC jali ventilators complete all as specified and as directed.

Soap dish, brass chromium plated all as per Cat Part No BA-45 of Prayag or techno commercially equivalent makes specified in PS fixed to wall all as per manufacturers instructions complete all as specified and as directed.

Supply and fix in repairs chromium plated towel ring, brass body, glossy finish complete all as per Cat No BA-02 of Prayag or techno commercially equivalent make as specified in PS all as specified and as directed.

Supply and fix fancy type MS curtain rod powder coated 20mm dia with wall thickness not less than 1mm ( of approved colour and design) including bracket and wall face support bracket fixing to walls with MS full screws (including fixing of wooden pieces of required size of walls) all as specified and as directed.

Taking down chowkats or frames with shutters without taking of shutters from the frames area exc. 1.5 sqm but not exc. 4 sqm each including removal to store all as specified and as directed.

Taking down chowkats or frames with shutters without taking off shutters from the frames area not.exc. 1.5 sqm each all as specified and as directed.

Taking down shutter area exc. 1.00 sqm but n.exc. 2.00 sqm each and removing from site complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.

Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitabe PVC sheet beading, and joined together with solvent cement, supplying & fixindg in the frame at site as per specifiction & drawing.

Supply and fix stainless steel 100 mm size butt hinges, medium weight complete all as specified and as directed.

Supply and fix aluminium handles 150 mm long, cast type anodised complete all as specified and as directed.

Supply and fix aluminium anodised barrel tower bolt 200mm long complete all as specified and as directed.

Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, with CP flange all as per Prayag Cat No 7306 Tranquil series or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix bib taps 15mm dia, cast copper alloy chromium plated, long body, with CP flange all as per Prayag Cat No 7308 Tranquil series or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix stop valves cast copper alloy, screwed down, high pressure15mm bore size screwed both ends for iron pipe or for unions and fittings all as per Prayag Cat No 7326 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Material and labour for vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repair complete all as specified and as directed.

Material and labour for brass chromium plated overhead shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union CERA Cat No F7020307 or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix gun metal gate or globe valves 20 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Material and labour for vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) all as per CERA Cat No CURTIS or techno commercially equivalent makes specified in PS fixed in repairs, complete all as specified and as directed.

Supply and fix plastic water closet seat cover, coloured, for pedestal pan closed pattern with flat bottom and cover with mild steel chromimium plated or aluminised hinging device complete fixed in repairs all as specified and directed.

Supply and fix PVC valveless, syphonic action type, flushing cistern, 10ltr capacity,low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, all as per ESSCO Cat No. WHE-WHT-183NL or techno commercially equivalent makes specified in PS fixed in repair complete all as specified and as directed.

Supply and fix vitreous china wash basin white flat back size 580x450 mm excluding taps but including 32 mm dia CP waste fitting and PVC waste pipe 610 mm long and brackets all as per CERA Cat No S 2040109 or techno commercially equivalent makes specified in PS complete fixed in repairs all as specified and directed.

Supply and fix PVC connections 15 mm size with PTMT nut of length 450 mm fixed in repairs all as directed.

Supply and fix 15 mm bore Pillar taps, cast copper alloy fancy type, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as per Prayag Cat No 9302 or techno commercially equivalent makes specified in PS fixed in repairs complete all as specified and as directed.

Supply and fix brass chromium plated Jet spray 15 mm dia including fixing to steel pipe complete all as specified and as directed.

Supply and fix PVC (SWR) floor trap 75mm bore plain with grating including jointing with solvent cement. complete all as specified and as directed.

Supply and fix in repairs stainless steel tubular towel rail, 20mm dia, 600mm long complete all as specified and as directed.

Supply and fix 75mm bore PVC(SWR) pipe, type 'B' single socketed in any length with rubber ring joints laid in trenches or floors fixed in repairs all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) pipes, type 'B' single socketed in any length with rubber ring joints fixed to wall including PVC clamps and necessary fittings fixed in repairs complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) branch piece (single Y), type 'B' equal or unequal with access door complete all as specified and as directed.

Supply and fix PVC (SWR) gully trap 125/110mm setting and jointing in solvent cement complete all as specified and as directed.

Supply and fix 100 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) fixed in repairs complete all as specified and as directed.)

Sunken flooring treatment as per following details complete all as specified and directed:- (a) Special treatment to toilet floor by demolition of existing treatment of any description and thickness, removal of rubbish to a distance exc. 5KM but not exc.7.5KM. (b) Clean the sunken portion of toilet / Bath / WC / Kitchen throughly to remove laitance, dirt dust, etc. (c) Form angle fillet of size 40mm x 40mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit"Pidicrete URP" or equivalent as given in Appx 'C'.). (d) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal tape"or equivalent as given in Appx 'C' and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or equivalent as given in Appx 'C'. Nahani Traps, etc to be fitted securely and the gaps around it to be grouted in the same manner. (e) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or equivalent as given in Appx 'C' on all angle fillets by brush

DARSHAN ENTERPRISES

S M MISHRA

L.K.R.TIWARI CONSTRUCTION

Shri Sant Cosntruction

VP DEVELOPERS AND CONTRACTOR

vishalconstruction

MANIYA CONSTRUCTION CO

greenstone construction

MAHESH DADAJI BACHHAV

V.R.PRAJAPATI AND CO.

M/S SUGAM CONSTRUCTION

Vastushilpa Contrustion