GE(S) BTD TOKEN NO 88 OF 2023-24 PROVISION OF CERTAIN LBW AND MINOR WORKS UNDER AGE BR II UNDER GE (SOUTH) BATHINDA AT BATHINDA MILITARY STATION (2ND CALL)

Amount

M & L 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M & L Brick work built in CM 1:6 with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Rendering 15mm thick in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement & with using integral water proofing compound complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Squaretube, suppling and fixing in opening as pert specification and drawing and complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F aluminium anodised 100 mm long butt hinges with galvanised mild steel screws complete all as specified and directed.

S&F aluminum anodised tower bolts 150 mm long complete all as specified and directed.

S&F aluminum anodised handles , cast type anodised 125mm long complete all as specified and directed.

S7F 2nd class HW 35mm thick facotry made panelled shutters with lock rail and panel of 9 mm bwp commercial ply of 12 mm veneered particle board with commercial veneering on both faces . The size of rail and stylr as per IS-1003 (pt-I) klin seasoned and chemically pressure treated complete all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300 mm complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm. complete all as specified and directed.

S & F 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

S & F 4 mm thick figured glass, pin head type and glazing with oil putty in ventilator complete all as specified and directed

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple complete all as specified and directed

M&L for 15 mm thick Screed bed or bedding layer in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed. Note : Using only course sand in screed bed.

M&L Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for 10 mm thick rendering in cement mortar 1:4 and finish the surface rough to receive the tile finish etc complete all as specified and directed Note :- Rendering will be done in course sand (Toka sand) only

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. etc complete all as specified and directed

S&F vitreous china squatting pan Orissa pattern of size 580mm x 440mm with integral foot rest and 'P' or 'S' trap including Cement concrete bedding , connecting flushing pipe and `P' trap, complete all as specified and directed

S & F 10 litre capacity PVC valve less syphonic action type flushing cistern low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

S & F tubes medium grade galvanised with all fittings 15 mm bore and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed

Ditto all as per item 24 above but 20mm bore.

S&F 500 litres capacity Rotational moulded polyethylene in white colour, three layered, water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S & F cast copper fancy type chromium plated alloy bib tap for 15 mm bore of pipe screwed down, screwed for iron pipe or for brass furrel and fixed complete all as specified and directed

S & F cast copper alloy chromium plated fancy type stop valves for 15 mm bore of pipe screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S & F Ball brass valves high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed for 20 mm dia bore of pipe complete all as specified and directed

S & F 100 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches complete all as specified and directed

S & F 75 mm bore cast iron (spun) soil, waste and vent pipes, ISI marked in any length with or without ears, with cement joints, fixed to walls with and including suitable size clamps / laid in trenches complete all as specified and directed

S & F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed

S & F 75 mm bore cast iron bends (any radius), diminishing pieces or tapers (large bore measured) with oval access door complete all as specified and directed

S&F 75 mm dia CI floor trap with grating incluing jointing to waste pipe fixed in cement concrete (1:2:4) type B-1, complete all as specified and directed

S & F 100 mm dia cast iron branch pieces, single (equal or un-equal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified and directed

S&F 100 mm bore CI cowl complete all as specified and directed

M&L in repair for 100 mm dia of CI P trap long with grating incl jointing to waste pipe fixed in cement mortar 1:2:4 type b 1 complete all as specified and directed

S&F pressed steel frames of size 105x60 mm for doors with one or more rebates incl necessary fixing lugs , hinges , lock strike plate etc ( thickness of sheet shall be 1.25 mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed

M&L PCC 1:3:6 type c-1 using 20mm graded stone aggreegates for filling in bed block of hold fast etc complete all as specified and as directed

S&F brass chromium plated shower rose 125 mm size with or without swivel joints fix to steel pipe or union complete all as specified and directed

PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed

M & L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed

M & L preparation of newly plastered surfaces of wallsand applying three coat of white wash on walls complete all as specified and directed

M&L for prepairing new surfaces of ceiling and applying two coat of white wash etc complete all as specified and directed

M & L returning filling including spreading levelling watering and well ramming in layers n exc 25 cm in soft/loose soil complete all as specified and directed

M & L removing excavated material exc 250n exc 500 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed

Supply only liquid integral water proofing compound of approved quality and make confirming to IS complete all as specified and directed

S & F vitreous china white wash hand basin white flat back size 450 x 300 mm excluding waste chain and plug on porcelain stopper butt including brackets complete all as specified and directed

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and out going pipes etc complete all as specified and directed.

S & F pillar taps cast copper alloy chromium plated fancy type with Capstan Head CP fixed connects with 15mm dia bore of pipe complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S & F PVC connections 15 mm dia with PTMT Nuts of length for 600 mm Long complete all as specified and directed.

M&L preparation of newly wooden surface of any description & applying two coats of synthetic enamel paints over ofpin primer includ preparation of surface complete all as specified and directed.

M&L preparation of newly steel surface of any description & applying two coats of synthetic enamel paints over red oxideprimer includ preparation of surface complete all as specified and directed.

M&L Cutting opening in cement concrete/ Brick walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. complete all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F 595x595mmx6mm thick Gypsum board laminated with PVC Sheet as in false ceiling including supply and fixing 'Tee" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-grid as per manufacturer direction. The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer's instruction complete all as specified and directed

M&L for PCC 1:5:10 type E-2 as in filling of sunken floors etc complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm Each with shutters of any description (W/out taking off shutters from the and frames) and removal from site complete all as specified and directed.

S&F in repair three track aluminium anodised sliding window with three sliding shutter, the size of outer frame three track 75x37x1.5 mm (using two track for glazed window shutter and one track for wire gauged, the section shutter size 37x18x1.2mm) and glazing with 5mm thick transparency glass of polycarbone including all round suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle including locking arrangement & 2 numbers sliding rollers of nylon with all necessary fittings including making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface complete all as specified and directed. complete all as specified and directed .

S&F Solar control film 50 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

Dismantling & taking down of existing unsv light fittings/fixtures complete all as specified and as directed

S & F LED panel light fitting, recessed mounted, square shaped of size 595x595x65 Sqm, 36(+ 10%) watts efficancy not less than 90 lumen/watt, extruded Aluminium/polycarbonate, PC diffusor, module and inbuilt driver complete including making connection complete all as specified and as directed

M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burried in ground vertically to earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of nuts, bolts, check nuts & washers etc connecting to earthing test point, main switch board and including 15 mm dia GI pipe light grade for protection of earth lead from earth plate to distribution board and 20 mm dia GI pipe medium grade connected with funnel having wire mess for watering purpose including necessary excavation and earth work, PCC (1:2:4) type B-1 (using stone aggregates) for earthing pit, 10mm thick cast iron cover with angle iron frame all as specified and shown in electrical plate No 3 of SSR Part-I and testing on completion including replacement of old unserviceable.

S & F in replacement GI strip 25x4mm with saddles and fixing screws etc. for main earth lead above ground level including taking down old strip complete all as specified and as directed

S&F in replacement sheet metal encloser double door 08 way TPN suitable for 240Volt AC supply ISI marked complete with neutral and earth bus bar, made out of CRCA steel sheet Factory made including blanking plate for unused module complete all as specified and directed.

S & F in repair MCB 6-32 Amp 240V SP 10 KA 'C' series complete all as specified and directed.

S & F in repair MCCB 415V, FP 63A, 16KA complete all as specified and directed.

S & F in repair MCCB 415V, FP 125A, 16KA complete all as specified and directed.

S & F in repair MCCB 415V, FP 160A, 36KA complete all as specified and directed.

Note:- Net contract sum shall be calculated after deduction of Sch of credit.

RAMA AUTOS

KULWANT RAI

M/s Manav Builders

MS GURTEJ SINGH CONTRACTOR

Aman Enterprises

M/s Kamal Constructions

JAGMEET SINGH CONTRACTOR

M/s HANS BROTHERS