CWEK/TOKEN-61/969 EWS/2025-26

Amount

Dismantling of plain or corrugated steel sheeting any guage , thickness, including Nainital or similar pattern from roof covering and wall cladding complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,all as specified.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L vitrified ceramic tiles light shade 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15 mm thick in CM 1:4 complete all as specified and as directed.

-Ditto- all as per item No 05 here-in-before but as in skirting including 10mm thick in CM 1:4 rendering as in backing coat complete all as specified and directed.

M&L for chequered cement concrete tiles 20cmx20cm and 22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors over and including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified.

M&L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B2 (using 12.5 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) as in floors etc finished even and fair complete all as specified and directed.

Demolition of PCC in ground floor and pavings n. exc 15 cm thick below or above ground level complete all as specified.

Material and labour for 75 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded stone aggregate) as in path/pavings/ floor/plinth protection etc laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc , all as specified and directed.

S&F 10 to 12mm wooden wall/ceiling panelling tongued & grooved including polishing fixed to timber frame work of soft wood 75mm x 50mm @600 mm c/c on both side, complete all as specified. Note:- The quoted rate shall be inclusive of timber frame work & binding as per requirement.

M&L for 4 mm thick pine wood veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with nails to timber frame work on ceiling , all as specified and directed.

M&L for 4 mm thick pine wood veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work on wall , all as specified and directed.

Dismantling of timber scantling 40 Sqcm and over in section in any position in, all as specified and directed.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling , all as specified and directed.

Ditto- all as per item No 19 above but except timber complete all as specified and directed. Note : Serviceable timber obtained from ser item No 18 here-in-before to be reused.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work, all as specified and directed.

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm complete all as spedified and directed.

S&F second class hardwood plain fillets square, rectangular in section not exc 3 Sqcm complete all as spedified and directed

Dismantling of boarding any description fixed in any position with nails, all as specified and directed.

M&L for weather boarding of 2nd class softwood (kail), clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

Fixing only for weather boarding of 2nd class softwood (kail), clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps complete all as specified and directed.

S&F facia boarding of 2nd class soft wood (Kail) planed one side with butt joints 20mm thick and chamfered one side and the boarding is matched , all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each , all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm , all as specified and directed.

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints complete all as specified and directed.

S&F 35 mm thick, 2nd class hardwood, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides; supplied and fitted to chowkats, complete all as specified and directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, all as specified.

S&F glazed and skeleton shutters thickness 30 mm,2nd class softwood(Kail), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Section 8 clause 8.24(b), all as specified.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :63x35mm X 1.48 mm thick for two tracks. (ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over. (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlocking closing (vi) Making good of wall surfaces to match with existing surfaces complete all as specified and directed.

S&F MS cold rolled butt hinges medium weight 100 mm long complete all as specified.

S&F MS cold rolled butt hinges medium weight 75 mm long complete all as specified.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy all as specified and as directed.

S&F 150mm long anodised aluminium tower bolt all as specified

S&F 100mm long anodised aluminium barrel tower bolt of extruded section all as specified

S&F 150mm long extruded aluminium alloy handle , all as specified and directed.

S&F 100mm long extruded aluminium alloy handle , all as specified and directed.

S&F galvanised mild steel wire cloth 0.46 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified.

S&F sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 4mm thick complete all as specified & directed.

Demolition of brick work or stone / boulder masonry built in CM including all quoins arches, pillars complete all as specified.

All as per item No 44 here-in-before but except stone

M&L for walling or random rubble stone masonry,uncoursed well bounded bedded and solidly hearted, built in cement mortar 1:6. complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping & the like including weathering slightly rounded or chamfered angles & throating,foundation etc including necessary form work complete all as specified and drected.

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials where directed at low lying areas in defence land complete all as specified and directed.

M&L rendering 15 mm thick on stone walling surfaces finished even and smooth with using extra cement in cement morta 1:4 complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer , all as specified and directed.

M&L for applying two or more coats of fire resisting paint over surfaces of any description wood, steel, iron, concrete, brick, stone, etc. exceeding 10cm in width or girth over and including priming coat over old/new surfaces, all as specified.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/ new surfaces, all as specified and directed.

M&L for preparation of old and previously untreated plastered surface applying two or more coats of fire resisting paint over surfaces of any description wood, steel, iron, concrete, brick, stone etc. complete all as specified.

Excavation in post holes each n exc 0.5 cum getting out, returning, filing in and removing earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m in soft/loose soil and making good surface as per existing surface complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation filling or mass concrete complete all as specified and as directed.

S& F for steel work in tubular trusses, as in gate ,post , including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, all as specified and directed.

S & F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality- A, all as specified and directed.

M&L for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth complete as specified.

S&F in repairs MS decorative curtain rod 20 mm dia covered with coloured PVC layer with decorative ends including PVC Knobs and MS bracket both ends complete all as specified and directed.

M&L cast iron floor trap, 75mm dia of out let, ISI marked, with mild steel chromium plated grating, including jointing to waste pipe in plain cement concrete 1:2:4 type B-1, as in repairs, complete all as specified and directed.

Taking up or down steel tubing and connections, size 15mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed.

Taking up or down steel tubing and connections, of 20mm dia bore, including cleaning for re-fixing or removal to stores, complete all as specified and directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

M&L galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions, complete all as specified and directed.

S&F 15 mm dia pillar tap fancy type with capstan heads CP screwed down high pressure with or with out lettered 'Hot' or 'Cold' with long screw shank fly nuts screwed shanks and fly-nuts screwed for iron pipe and fixed in repair , all as specified and directed.

S&F angular stop valves , cast copper alloy, screwed down high pressure, fancy type with crunch or butterfly handle, chromium plated, screwed both ends for iron pipe or for unions, or for 15mm dia bore, fixed as in repairs, complete all as specified and directed.

S&F PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, fixed as in repairs, complete all as specified and directed.

S&F grating square (SLIT) 150mm size, of PTMT (Openable), fixed as in repairs, complete all as specified and directed.

S&F towel rail 600mm long (between flanges), 20mm dia, ‘D’ type, chromium plated brass, fixed to walls with screws and plastic cleats, fixed as in repairs, complete all as specified and directed.

S & F PVC (SWR) bend any radious 75mm bore , all as specified and directed.

S&F in repair vitreous china wash basin with pedestal pattern, white, flat back, size 550x400mm including CP waste coupling and PVC wate pipe and MS steel brackets all as specified and directed.

S&F in repair 32 mm waste coupling of PTMT (half or full threaded) (minimum weight 32mm 45gms/40mm-60 gms) , all as specified and directed.

M&L for coloured glazed designer ceramic tiles 300 x 450 and 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over and including 15mm thick plaster in CM 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and directed.

M&L machine cut Kota stone slab flooring 18-20mm thick per sample kept in GE's office laid over and including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing, gridding and polishing to achive mirror finish as specified & directed by Engr-in-Charge.

S&F 2nd class hard wood 35 mm thick glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc and fitted to chowkats , all as specified and directed.

S&F factory made box type steel windows double shutter (glazed and wire gauzed) with side hunges shutters, including box type hinges ,steel handle fabricated type for each leaf duly welded , mild steel barrel tower bolts 150mm size(02 nos for each leaf) duly welded,complete with glazing bars , dovetailed or welded,including MS fillets, including provision and welding of guard bars including one shop coat of red oxide primer over window frame & guard bars 8mm included, complete all as specified and directed . Notes :-(I) Glazing & wire gauze shall be measured and paid separately as supply and fixing . (ii)The term double shutter stated is meant for providing glaze shutter as well as wire gauze shutter on outside and inside of the frame respectively.

S&F bib taps, cast copper alloy, fancy type with capstan head, crutch or butterfly handle chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, fixed as in repair, complete all as specified and directed.

S&F vitreous chinaware wash down water closet squatting pan Indian type (Orissa pattern) of size 580mmx440mm, white, with integral foot rests (excluding flushing cistern and flush pipe but including CI ‘P’/’S’ trap), set and jointed including embedding concrete, and taking down old and removal, complete all as specified and directed.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 300 gms) , all as specified and directed.

S&F in repairs stainless steel soap dish any type, fixed to pluges with chromium plated brass screws complete all as specified

S&F in repairs soap dish vitreous china white, approximate size 160x160x90mm fixed to pluges with chromium plated brass screws complete all as specified

S&F 30mm thick factory made flush shutters , solid core construction , with block board core and ply wood face panels commercial type on both sides fixed to chowkhats etc complete all as specified and as directed.

M&L single side prelam PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification , all as specified and directed.

S&F steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Notes: - Glass, wire gauge shall be measured & paid separately.

S&F 300 mm size mild steel ordinary rat rail rod pattern springs including roller and roller plate complete, all as specified and directed.

S&F 200mm long anodised aluminium tower bolt extruded section all as specified

S&F MS framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc complete drilled for fixing to steel sheeting or other covering, doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete conforming to Fe-410-W complete all as specified and directed.

M&L for preparing old plastered or unplasterd surfaces of walls and applying two coats of cement based paint all as specified and directed. .

M&L preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint , all as specified and directed.

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore complete all as specified.

S&F for repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors 75 mm bore pipe , all as specified and directed.

All as per Item ser No 94 but 110 mm bore of pipe

S&F in repair for PVC (SWR) bend with access door inluding jointing with solvent cement for 75 mm bore complete all as specified.

All as per Item No 96 but 110 mm bore

S&F in repairs coloured oval type wash hand basin, size 580x450 mm, white, flat back, (for Hospital use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc complete all as specified and directed.

S&F in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed.

S&F 10 ltr capacity PVC valveless symphonic action type flushing cistern, low level with inlet , ball valve, float all as specified including necessary flush pipe as directed.

S&F in repairs CP health faucet hand held triggered nozle and delivers a sprey of water with pipe complete all as specified and as directed.

S&F in repairs PVC connection 60cm long with brass check nuts on both sides suitable for 15mm bore pipe etc complete all as specified and directed.

S&F in repairs fancy type stop valve/angle valve/concealed stop cock cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes of 15mm bore complete all as specified and directed.

S&F in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified.

M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering , all as specified and directed.

M&L granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plat forms and like in cement mortar 1:4 including pointing in white cement 1:2 us ing marble dust with admix ture of pigment to match with shade of granite complete all as specified and directed.

M & L for broken stone or boulders in hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface , all as specified and directed.

M&L for providing precast RCC 1:1.5:3 type A-1 (using 20mm graded mechanically crushed stone aggregate) as in cover slab for man holes, drains , soak well etc and similar articles etc, set in CM 1:4 with plain faces including chamfered weathering throating etc including necessary form work complete , all as specified and directed.

S&F mild steel TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 109 here-in-before but 6 to 8mm dia.

M&L for 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame work , all as specified and directed.

M& L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions , all as specified and directed.

S&F 40mm dia cup board knobs fixed with nut and washers of mild steel bright finish complete all as specified and directed. .

S&F mortice lock vertical type mild steel 4 lever 100 mm fixed in repair , all as specified and directed.

S & F continuous (piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) in 30 mm , all as specified and directed.

S & F PVC (SWR) 110mm junction single (single T) equal or unequal , all as specified and directed.

S&F white vitreous china laboratory sink size 600x450x200mm with plugs, washers and wastes including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe; upto 0.5 sqm each fixed as in repairs, complete all as specified and directed.

S&F in repair 40 mm waste coupling of PTMT (half or full threaded) (minimum weight 32mm 45gms/40mm-60 gms), all as specified and directed.

M&L, non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry and pointed in white or coloured cement to match, laid over and including 10 mm thick screed bed in CM 1:4, complete all as specified and directed

S&F aluminium alloy powder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug (b) Middle and lock rail : 150x44x1.48mm thick (c) Bottom rail : 150x44x1.48mm thick (d) Top rail/style : 85x44x1.48mm thick (e) Aluminium beading : 0.7mm thick (f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of not less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (Make Sandhu ISI marked or its equivalent approved make) (g) Making good of wall surface to match with existing surface complete.

Material and labour for rendering 15mm thick on any faces of brick wall or concrete surface in CM 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete , all as specified and directed. Note : WPC shall be measured and paid separetely.

M&L perparation of old wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) , all as specified and directed.

M&L in repairs venition blinds roller curtain 1mm thick flap with adjustable arrangements for vertical / horizontal movements including all necessary fittings for windows as per approved design complete all as specified and directed.

M&L cutting into existing manholes for connecting new drain pipe 100mm dia bore, making good to pipe, cutting benching for & forming branch channel in cement concrete 1:2:4 type B-1, and rendering smooth finished, complete all as specified and directed.

S&F chromium plated brass shower rose 125mm dia with swivel joints, fixed in repairs, complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement as fixed in repairs , all as specified and directed.

S&F PVC (SWR) reducers 75/110mm bore , all as specified and directed.

S&F 100mm stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof , all as specified and directed.

S&F 75mm bore stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof , all as specified and directed.

S&F in repair vitreous china one piece wash down water closet pan (pedestal pattern) including flushing cistern, seat cover and all necessary fittings , white complete all as specified and directed.

S&F in repair vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) vitreous china urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl flush pipe, grating and union for discharge pipe, waste coupling, urinal spreader , all as specified and directed.

S&F vitreous china urinal partition white of size 310x700 mm slabs terminating about 40cm above floor line, fixed in repairs , all as specified and directed.

S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed , all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B 1 using 20 mm graded stone aggregate as in floor finish even and smooth using extra cement complete , all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in bonding/locking of edges of interlocking tiles & the like including necessary form work complete all as specified and drected.

M&L providing and laying at or near ground level factory made kerb stone of 1:1.5:3 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and as directed.

M&L for PCC 1:1.5:3 type A1 using 20mm graded stone aggregate as in floors laid in bays including finishing the concrete surface even and smooth etc including necessary form work complete all as specified and drected.

M&L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ , all as specified and directed.

M&L forming construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A, all as specified and directed.

M&L forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, all as specified and directed.

M&L for sand filling under floors/ pavement or in foundations including watering and consolidation, all as specified and directed.

M&L rubber moulded interlocking paver block any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment complete , all as specified and directed.

M&L rubber moulded interlocking paver block any shape and size confirming to IS 15658 -2006 of 80mm thickness, M-40 grade with grey cement and no pigment complete, all as specified and directed.

M&L rubber moulded chequred coloured tile size 300x300x20 mm using table vibrator or equivlent as in jointed and pointed in neat cement slurry over and including 15 mm screed cement mortar 1:6 and pigment size conforming and dismantling old floor tile as specified & directed by Engr-in-Charge.

M&L for granite (of any type) tiles 16 to 18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm screeding in cement mortar 1:6 and pigment size conforming complete all as specified.

All as per item 146 here-in-before but on vertical surface such as dado,skirtings, etc over 10 mm thick screed in CM 1:4 complete all as specified.

Taking down existing fencing wire mesh of any description complete all as specified and as directed.

S&F welded steel wire mesh febric fixed complete to steel members. weight exc 4.00 Kg/per sqm, all as specified and directed.

S&F in repairs galvanized two strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured), all as specified and directed.

S&F chain link MS galvanished fencing of any size or type including line wires, any mesh, any size and type of standards, rails, straining bolt etc including provn of binding wire etc complete all as specified and as directed.

S&F mild steel screw bolt with hexagonal or square head at one end and screwed at the other end with washer & one hexagonal nut not exc 5 cm long & 5 to 10mm dia complete all as specified and as directed.

M&L for mild steel round bars 10mm dia and above as supporting horizontal bars in chain link fencing, incl binding and bonding complete all as specified and directed.

Dismantling posts or struts of steel or RCC any section including taking out embedded portion from conrete or masonry and making good disturbed ground, all as specified and directed.

M&L preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a priming coat of red oxide, zinc chromate primer, all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F in angles iron post & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire incl all necessary drilling bolts or rivetting & similar work confirming to Fe- 410-0 or Fe 310-0 and flat iron 40x4mm fillets (for securing chain link fencing etc) complete all as specified and as directed.

M&L for 0.63mm thick plain, galvanised, mild steel sheeting, in ridges,hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, , all as specified and directed.

M&L for 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, all as specified and directed.

M&L for one coat of synthetic enamel paint preparation of old painted steel surfaces as in walls / roof trusses /purlins/ rafters/angle iron posts etc complete all as specified and directed.

M&L for bricks work built in CM mortar 1:6 with sub class 'B' bricks straight or curved on plan exc 6m mean radius all as specified and directed.

All as per item No 161 here-in-before but except bricks

M&L for brick work with sub class 'B' bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 as in manhole/septic tank /soak well complete all as specified and directed.

Supply only integral water proofing compound, all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surfaces even & fair complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping & the like including weathering slightly rounded or chamfered angles & throating,foundation etc including necessary form work complete all as specified and drected.

M&L for plain cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in beds of surface channels & drains including smooth finish complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete including forms, moulds etc all as specified.

Excavation in trenches n. exc 1.5 wide and n. exc 1.5 Mtr deep and getting out in soft/loose soil complete all as specified and directed.

Returning , filling in including spreading, levelling, watering and well ramming in layers n. exc 25cm thick in loose/soft soil complete all as specified and directed.

Demolition of reinforced concrete of any description and in any postion not otherwise specifically provided for (reinforcement cut to facilitate demolition, all as specified.

S & F in repair for RCC pipes class NP-3, 300mm dia laid and jointed complete with collars as required complele all as specified and directed.

All as per item No 172 here-in-before but 250mm dia pipe.

Supply and fixing in repairs PVC (SWR) 110mm bore as soil waste and vent pipe single socketed in any length with rubber ring joints fixed to walls complete all as specified.

All as per srl item No 174 above but 75mm bore complete all as specified and as directed

Supply and fxing PVC (SWR) bends any radius for 110mm pipe complete all as specified and as directed.

All as per item No. 176 here-in-before but for bend for 75mm, all as specified.

M&L cutting into existing manholes for connecting new drains of 150mm dia, making good to pipe and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching, all as specified and directed.

M&L for water proofing treatment to RCC / PCC/ brick wall above or below ground level of SWT as detailed here in below :- (i) SWT chipping and removing all loose / spalling out concrete including loose plaster from old surfaces of RCC walls, PCC/Brick wall above or below ground and providing one layer of guniting, cleaning the exposed steel by sand blasting and providing and welding new reinforcement (if required and directed) to old steel and applying two coats of anti-corrosive zinc chromate paint (both on old and new steel), applying one coat of epoxy based adhesive over exposed surfaces to receive guniting, including supplying and fixing stainless steel wire mesh of size 1.40mm nominal dia average width of aperture 12mm and binding with 22 gauge binding wire with reinforcements or with stainless steel staples and pressure guniting the surface with CM 1:3 with average thickness 35mm with equipment as per IS: 6433-1972 and IS:9012-1978 and then rendering the surface in 10mm thick CM 1:4, finishing the surface even and smooth without using extra cement, including all necessary scaffolding and staging and rubbishing off the premises complete all as specified and directed ii) After that all structure joint cracks shall be filled with dr fixit polusalphite 41-g. (or equivalent) (iii) All holes of bricks and angle shall be filled with using polymer modified mortar i.e 1part cement,3 parts sand and 10% dr fixit MPB (or equivalent) to repair all surface with this mortar. (iv) Apply one primer coat of dr fixit MPB in ratio 1:1 on all water tank surface ie one part MPB (or equivalent) and one part cement. (v) Apply two coats of dr fixit fastflex heavy duty waterproofing compound for waterproof the structure. When tinal coat of dr dixit fastflex coat is tacky, sprinkle dry and clean dust free sand on coating surface for bonding of plaster. Note:- The entire work of water proofing to SWT shall only be carried out by the PIDILITE on SUPPLY AND APPLY BASIS or equivalent of FOSROC, BOSTIK as approved.

Taking down carefully copper/aluminum point wiring (light. Fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors etc. to match with existing specification complete, all as specified.

M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall with the help of heavy duty ISI mark PVC casing capping strip in any length wiring system and along with its all connected fittings accessories including providing of wooden board with bakelite sheet for housing / mounting of switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc for one light point / fan point controlled by one switch of one way point wiring system complete, all as specified & directed by EIC

All as per item ser No 181 here-in-before one 3 pin 5 Amp switch socket outlet on independent board

All as per item ser No 181 here-in-before one 3 pin 5 Amp switch socket outlet on same board with accessories

All as per item ser No 181 but 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor, all as specified.

S&F switch piano flush type, single pole, one way 6 Amp 240 volts, complete all as specified and directed

S&F switch piano flush type, single pole, 15 Amp 240 volts, complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and directed.

S&F ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body all as specified and directed

S&F in repairs distribution board, SPN 8 Way, double door complete all as specified and as directed

S&F in repairs distribution board, SPN 4 Way, double door complete all as specified and as directed

S&F in repairs MCB,DP 40 Amps 240 Volts 'B' curve, complete all as specified and as directed

S&F for MCB single pole 6 to 32A Amps 240 Volts, 'B' curve complete all as specified and directed .

S&F for LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose all as specified and directed

S& F LED light fitting 1x10 watt bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S&F for LED bulb 12 W, 220V suitable size from ceiling rose all as specified and directed

S&F lamp holder, PVC/ polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed

S&F building security light LED fitting 35 watt 230 V AC outdoor type with high pressure dia cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and including thermal management in multiple optics complete with 25 Nos IP 65/66 protection complete all as specified.

Supply only PVC flat twin core cable PVC insulated aluminium conductor size 10 sqmm 2 core, all as specified.

M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM

M&L in repairs for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc.

M&L for point wiring using proper colour coding complete with 1100 Volts grade 4 Sq.mm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, with sunk pressed steel/GI terminals boxes having 1.6 mm thick suitable for housing of modular type switches/sockets/fan regulators, including 2.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for switch socket combination, 3 pin, 15 Amps on independent board all as specified and directed.

S&F for modular type switch 6 Amps, one way one module complete all as specified.

S&F modular type socket outlet, 6 Amps, 2/3 pin combined 2 module complete all as specified.

S&F for modular type socket outlet, 6/16 Amps, combined 2 module complete all as specified.

S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete with gang box all as specified and as directed.

S&F for white cover with frame suitable for accommodating 01 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for white cover with frame suitable for accommodating 02 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for white cover with frame suitable for accommodating 03 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for white cover with frame suitable for accommodating 4 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for white cover with frame suitable for accommodating 6 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for white cover with frame suitable for accommodating 8 Nos module switch/socket etc complete all as specified and directed by Engr-in-Charge.

S&F for PVC body fresh air fan with PVC blades, ISI marked, 225 mm sweep with louvers and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to fresh air fan complete in all respect all as specified and directed.

M&L for submain wring using proper colour coding with 3 runs of single core, PVC insulated, FRLS unsheathed suitable for 1100 Volt, multistranded, copper conducter cable of size 6 Sqmm drawn and including PVC conduit medium grade not less than 25 mm dia, ISI marked concealed in wall/roof etc with required accessories complete all as speacified and directed. Note :- (i) The minimum size of PVC conduct shall be 25mm however higher shall be used as per number of conductor to be pass through the conduit. Engr-in-Charge shall ensure for proper size of PVC conduit be used at site. (ii) Seperate conduit shall be used for each submain wiring circuit irrespective of any number of wire. (iii) 3 runs of conductor and one run of conduit shall be measured as one run.

M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to GI strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion all as specified and directed.

S&F for 1x20 watt baton integrated LED channel tube light fitting, 230 Volt indoor housing with integral sleek extruded polycarbonate LED channel with white acrylic cover surface/wall mounting, with inbuilt electronic driver/control gear, bipin holders, connector block etc complete wth all accessaries internally pre wired and including connecting lead, three core 1.5 Sqmm from ceiling rose to tubelight fitting complete all as specified and directed.

S&F LED Lamp 9 W 'T' type complete, all as specified.

S&F SMD LED panel recess/surface 15 watt Round/square type, LED ceiling light with extruded aluminium housing and milky diffuser including connecting up with twin core twisted flexible copper conductor cable with suitable size of 170-230 Volts, 50HZ complete, all as specified.

S&F for angular lamp holder, PVC body complete with wiring etc. all as specified and directed.

S&F in repairs Distribution Board, SPN 12 Way, Double door complete all as specified and as directed

S&F hanging light on table LED light 9/10W complete all as specified

M/s Mohammad Shafi Malik (BID ID -3440905)

M/S STARE BUILDERS (BID ID -3443921)

M/S SMA and SONS CONSTRUCTIONS (BID ID -3441916)

M/S RATHER CONSTRUCTION CO (BID ID -3437545)

M/S HI-TECH ENGINEERS (BID ID -3440736)