Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC | L1 | Accepted-AOC being L1 bidder | |
| 2 | L2₹21.5 L+₹1.1 L (5.40%)Rejected-Finance | L2 | Rejected-Finance not become lowest bidder | |
| 3 | L3₹22.3 L+₹2.0 L (9.70%)Rejected-Finance | L3 | Rejected-Finance not become lowest bidder | |
| 4 | L4₹24.9 L+₹4.5 L (22.2%)Rejected-Finance | L4 | Rejected-Finance not become lowest bidder | |
| 5 | L5₹25.3 L+₹5.0 L (24.5%)Rejected-Finance | L5 | Rejected-Finance not become lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
29 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sunny Kumar Attri
Garrison Engineer Jhansi
SMART PERIODICAL SERVICES TO CERTAIN OTM ACCN UNDER AGE B/R-I AT GE JHANSI
2023_MES_600304_1
GE/JHA/TOK/48 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE Jhansi
As per NIT and Tender documents
9 documents required · 9 mandatory
₹500
Yes
GE Jhansi
₹90,000
Yes
7 Aug 2023
1 Jun 2023
1 Jul 2023
1 Jun 2023
29 Jun 2023
15 Jun 2023
1 Jun 2023 - 8 Jun 2023
Amount
Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out during execution)
Complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on ceiling complete all as specified and as directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out during execution).
M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the ceiling surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).
Material and labour for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3) Allow 6-8 hrs time to dry the putty surface.
Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface incl one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats complete all as specified and directed. complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application).
Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over and incl one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and allow 6-8 hours to dry the surface for painting of subsequent coats with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. Make - Nerolac Excel Top guard / Asian Paints Ultima Protek / Berger weather coat long life 10
Notes: Applicable for Ser item No 1 to 06 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c) The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (d) After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill.
M&L for preparation of existing surface of walls by brush, sand paper, surface to be repaired if required , filling putty in holes etc and applying one coat of oil bound distemper white or any tint complete all as specified and directed.
M&L for preparation of existing surface of walls by complete removal of existing treatment, washing/rubbing down, surface to be repaired if required , filling putty in holes etc and applying two coats of oil bound distemper white or any tint over a coat of primer, complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint including facia , cornices, chajja etc complete all as specified and directed.
M&L for preparation of existing surface of walls and applying two coats of cement base paint over a coat of cement based primer complete all as specified and directed.
Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
Material and labour for rendering 15 mm thick on fair face of brick work or concrete surfaces of wall in cement mortar 1:4 and finishing the surfaces even and fair mixed with liquid water proofing compound as per manufacturer's instruction complete all as specified and directed. Note: Water proofing compound shall be measured & paid separately.
Material and labour for rendering 10 mm thick on internal surface of brick work or concrete surfaces of wall in cement mortar 1:6 and finishing the surfaces even and fair without using extra cement complete all as specified and directed.
Material and labour for rendering 5 mm thick of brick or conc surfaces of ceilling in cement mortar 1:3 and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
Supply only liquid water proofing compound complete.
Material and labour for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Material and labour for preparation of old plastered surfaces and applying one coat of white wash complete all as specified and directed.
Material and labour for preparation of old painted wood or wood based surface of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
Material and labour for prepration of old painted steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint. Complete all as spd and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed.
Supply and fix of 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.
PURNA NAND
M/S GR construction compony
M/S ANIL TRADERS
M/S ADITYA ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .