Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAdmitted-Finance | ₹3.1 Cr | L1 | Admitted-Finance |
| 2 | L2₹3.1 Cr+₹1.5 L (0.47%)Admitted-Finance | ₹3.1 Cr+₹1.5 L (0.47%) | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | 4 Star Group L1 | Kishore Borah L2 |
|---|---|---|---|---|---|
| 1.00 | Cold milling of bituminous pavement surface upto required depth by mechanical means using milling machine without disturbing the under laying layers to proper line and level, cleaning the surface properly after milling and removing the loose materials, stacking the milled materials for re-use, necessary guarding, barricading & lighting including hire charge of machinary, cost of fuel and labour and other incidental charges all complete and as per direction of Engineer-in-charge. | 14,759.4 | Sqm | 90 ₹13,28,346 Lowest | 120 ₹17,71,128 |
| 2.00 | Removal of milled material from site to plant for recycle up to 1.00 KM including extra lead upto plant complete. | 499.32 | Cum | 410 ₹2,04,721.2 Lowest | 420 ₹2,09,714.4 |
| 3.00 | Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.) | 14,759.4 | Sqm | 16 ₹2,36,150.4 Lowest | 25 ₹3,68,985 |
| 4.00 | Mastic Asphalt (Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29( binder having penetration as (15+/- 5) at 25 deg. centrigrade), prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti skid surface with bitumen pre coated fine grained hard stone ships of 13.2mm nominal size at the rate of .005cum per 10 sqm. and at an approximate spacing of 10 cm center tpo center in both direction , pressed into surface when the temperature of surfaces not less than 1000C, protuding 1mm to 4mm over mastic surface , all complete as per clause 515. | 9,546 | Sqm | 1,560 ₹1,48,91,760 | 1,522 ₹1,45,29,012 Lowest |
| 5.00 | Mastic Asphalt (Providing and laying 50 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29( binder having penetration as (15+/- 5) at 25 deg. centrigrade), prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti skid surface with bitumen pre coated fine grained hard stone ships of 13.2mm nominal size at the rate of .005cum per 10 sqm. and at an approximate spacing of 10 cm center tpo center in both direction , pressed into surface when the temperature of surfaces not less than 1000C, protuding 1mm to 4mm over mastic surface , all complete as per clause 515. | 5,213.4 | Sqm | 2,635 ₹1,37,37,309 | 2,622 ₹1,36,69,534.8 Lowest |
| 6.00 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications | 333.52 | Sqm | 990 ₹3,30,184.8 | 976 ₹3,25,515.52 Lowest |
Tender Value
₹3.1 Cr
EMD Value
₹6.2 L
Closing Date
21 Oct 2020, 2:00 pmClosed
Chief Engineer, PWD(Roads), Assam, Guwahat
O/o the Chief Engineer, PWD(Roads), Assam, Guwahat
Improvement of Sixmile Fly Over providing mastic asphalt at G.S. Road, Sixmile under SOPD(G) for the year 2020-21
2020_PWD_18901_1
CE/CW/14/20-21(6MileFO-Mastic)
Open Tender
Civil Works – Roads
Item Rate
365 days
Guwahati
Please refer Tender documents.
5 documents required · 5 mandatory
₹9,200
Yes
Empowered Officer, ASRB
₹6.2 L
Yes
7 Nov 2020
13 Oct 2020
21 Oct 2020
13 Oct 2020
21 Oct 2020
13 Oct 2020
13 Oct 2020 - 21 Oct 2020
Amount
Cold milling of bituminous pavement surface upto required depth by mechanical means using milling machine without disturbing the under laying layers to proper line and level, cleaning the surface properly after milling and removing the loose materials, stacking the milled materials for re-use, necessary guarding, barricading & lighting including hire charge of machinary, cost of fuel and labour and other incidental charges all complete and as per direction of Engineer-in-charge.
Removal of milled material from site to plant for recycle up to 1.00 KM including extra lead upto plant complete.
Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.( Including cost of testing of materials at site and laboratory as directed by the deptt.)
Mastic Asphalt (Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29( binder having penetration as (15+/- 5) at 25 deg. centrigrade), prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti skid surface with bitumen pre coated fine grained hard stone ships of 13.2mm nominal size at the rate of .005cum per 10 sqm. and at an approximate spacing of 10 cm center tpo center in both direction , pressed into surface when the temperature of surfaces not less than 1000C, protuding 1mm to 4mm over mastic surface , all complete as per clause 515.
Mastic Asphalt (Providing and laying 50 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29( binder having penetration as (15+/- 5) at 25 deg. centrigrade), prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing anti skid surface with bitumen pre coated fine grained hard stone ships of 13.2mm nominal size at the rate of .005cum per 10 sqm. and at an approximate spacing of 10 cm center tpo center in both direction , pressed into surface when the temperature of surfaces not less than 1000C, protuding 1mm to 4mm over mastic surface , all complete as per clause 515.
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes and conforming to the MoSrt&H specifications
Kishore Borah
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.06 MB
Tendernotice_2.pdf
PDF • 1.14 MB
Tendernotice_3.pdf
PDF • 0.33 MB
BOQ_29254.xls
BOQ • 0.98 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .