Estimate for Construction of Head Regulator of Bhadurke Disty Offtaking at Rd 45000/R of Jalalabad Branch

Amount

R.C.C.M-25 height upto 5 mtr with batching plant transist mixure and concrete pump (CSR Item no: 21.32 f/a/i).

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (CSR - 21.4)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 with computerised batchmixing.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications.RCC Grade M20, With Batching Plant, Transit including centering and shuttering Mixer and Concrete Pump CSR Item no: 21.32 (E ii)

Sand Filling in Foundation Trenches as per Drawing & Technical Specification 21.3

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-30 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (c (i) )

Provision of an Reinforced cement concrete crash barrier at the edges of the Bridge,road, approaches to bridge structures and medians, constructed with M-40 grade concrete , with HYSD reinforcement conforming to IRC:21 CSR - 22.12 a and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94- DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified-with concrete mixture.

Furnishing and placing reinforcement / prestressed cement concrete RCC Grade M-25 for solid slab by using concrete Mixture ht.upto 5 m as per Drawing and Technical specification including shuttering & centering (CSR item no. 22.1 (B (i) )

Supplying, fitting and placing HYSD bar reinforcement in sub-structure completeas per drawing and technical specifications(CSR item no. 22.2)

Dismentling of Brick Masonary in 1:3 CSM (CSR Item No. 8.5 (b) )

Dismantling of Old Bridge (RCC Main Slab) (CSR item no. 8.6-e)

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, constructionn of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil by mechanical Means. upto 3m (CSR Item No. 21.1 B a)

Making dewatering arrangement by pumping set 4'' *4'' (Tractor driven) CSR 25.6

Providing, Running and maintenance of pumping set 8 H.P./ Generator set for dewatering arrangements complete in all respects. (As per Dewatering Plan attached) (CSR Item No. 25.4)

Making bore and installation of pumping set for dewatering arrangements complete in all respects. (CSR item no: 25.5) as per Dewatering Plan attached)

Providing and Fixing M S Plate 12 mm Thick

Providing and Fixing M S Plate 10 mm Thick

Providing and fixing clamp plate MS Flate 50x10 mm

Providing and fixing clamp plate MS Flate 70x10 mm

Providing and Fixing M S Plate 8 mm Thick

Providing and Fixing M S Plate 20 mm Thick

Providing and Fixing Anchors

Providing & Fixing of S.S Plate 8 mm

Providing and fixing ISMC 200 mm

Providing and Fixing M S Plate 15 mm Thick

Providing and Fixing SHS 150 x 150 x 6 mm

Providing and Fixing Stiffner Plates 6 mm

Providing & Fixing of Chequred Plate 6mm thick

Providing & Fixing of Chequred Plate 8mm thick

Providing and Fixing SHS 60x60 x 6 mm

Providing and Fixing ISA 65*65*6

Providing and Fixing GI pipe 50NB

Providing and fixing ISMC 150 mm

MS housing cover with worm and worm wheel assembly shaft handle gun metal bush with triple start treading inside complete in all respect 1.5 tonne capacity

Providing and fixing Skin plate 8mm thick

Providing and fixing Wedge type bottom seal 10mm

Providing and fixing Square bar 25*25

Providing and fixing seal 44dia 10mm thick

MS Spindle with double start or triple start threading 11 height 1/3/4 dia complete (CSR- 49 i)

Supply and fixing of spindle cover

Supply of synthetic grease

Supply of Mobile oil

Dismantling of Spindle Hoist Machine at site complete in all respects.

Dismantling of the other mechanical structure

Fixing and Holding the gate with the help of 35 tonne capacity crane.

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Providing and fixing hooke plate

Hooke pin 20mm dia 150 length

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Fixing of coupling for common shaft with supply of Spindle shaft coupling rods and cover complete in all respect and to entire satisfaction of Engineer In charge.

painting two or more coats with anticorrosive bitumastic paint to give an even shade

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Providing and Fixing S. Steel Plate 12 mm Thick

Providing and Fixing M.S. Plate 14 mm Thick

Providing and fixing ISMB 200 mm

Providing and fixing SIDE SEAL BASE plate 50x10 mm

Providing and fixing ISST 150 mm

Providing and Fixing ISMC 100

Providing and Fixing SHS 40x40 x 2.6 mm

Supply,Providing and fixing of stainlesss steel bolts & nuts with washer of all sizes and lengths required as per sample drawing direction of Engineer in Charge

Fillet welding with high strength steel rods complete in all respect and to entire satisfaction of the engineer in charge

Any Other Item

Aseem Grover Govt Contractor