SPECIAL REPAIR TO BLDG NO -19 J THE MALL , PROVN OF INTERLOCKING TILES FOR PARKING AREA AT HQ PUPSA AND PROVN OF EXHAUST DUCT SYSTEM FOR 3X STEFAB FRYING MACHINE INCLUDING EARTHING OF 510 ABW SL-01 UNDER AGE B/R-I AND AGE E/M-I OF GE ( NORTH ) MEERU

Amount

Demolition brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified & directed

M & L for brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified & directed

M&L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified & directed

Demolition of cement concrete of ground floor n exc 15 cm in depth in any position nototherwise specifically provided for complete all as specified & directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified & directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) exc 1.50 Sqm & n exc 4 Sqm each complete all as specified & directed

S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note No 1. (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note No 1 (Rates inclusive of M.S. hold fast/ lugs or SS dash fasteners shall not be paid for separately). Note: WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as specified & directed.

S&F Stainless steel butt hinges 100mm in size complete all as specified & directed

S&F factory made 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels with 0.80mm thick mica commercial type pasted on both sides, complete all as specified & directed

S & F anodised aluminium door shutters without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings such as, hinges, handles, including anodised aluminium frame with one or more rebates including S&F 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified & directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type) with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, including S&F 5.50 mm thick black glass complete all as specified and directed.

S & F 125mm size stainless steel handles cast type complete all as specified & directed.

S&F stainless steel sliding bolt 300mm long plate type with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate all as specified & directed

S&F stainless steel barrel tower boltwith bright bolt 200 mm long complete all as specified & directed

M&L for preparation of new wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over and including a coat of pink primer (by spraying) complete all as specified & directed

M&L for preparation of old steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel (by spraying) all as specified & directed

M&L for fabrication and fixing BWP (Boiling water Proof) solid block Board 19 mm thick conforming to IS 1659- 2004 to be used ,inside depth not less than 0.50 metre. All the exposed surface which are or can be visible to be covered with 1.0 mm th. Sunmica of Approved colour, shade and finish. The surface which will come in contact with wall/ masonary/tiles etc shall be premiered with Appropriate Wood primer mixing Approved Antitermite chemical and pasting 250-micron water proof Plastic Sheet with appropriate adhesive. All the Pastings to be done with water resistant Adhesive. Any Butt joint should be strengthen with Screw and Fissures inserted with appropriate pasting compound. Shutters of storage unit to be formed out of 19 mm thick BWP ply and faced with 1.0 mm thick Sunmica. Provide shelf etc. made of 19 mm thick BWP B.B., polished to engineer-in-charge's approval. Complete Including with all necessary fittings like knobs, magnet catcher, running track for sliding, hinges any type, ball catchers, SS tower bolts 150mm , locks,SS handles 300mm long, adjustable shelves etc. as per directions of Engineer Incharge. Inside surfaces to be finished with 1.00 mm thick Sunmica and outer exposed surface with 1.00 mm th. Sunmica. Cupboard depth of 500- 600 mm including dismantling of old plywood/ prelam particle boards (Note: 1.Rates inclusive of solid block board, adhesives, fittings/fixtures, Sunmica and plastic sheet etc and shall not be paid separately. 2.Front facing area shall only be considered for payment ).

S & F 150mm size helical door spring including roller and plate fixed with screws to wooden or welded to iron chowkat complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified & directed

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

M & L for 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M&L for machine cut kota stone slab flooring 15-20mm thick over cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing upto Granite finish complete over 15mm thick screed bed in CM 1:6 complete all as specified & directed

M&L for Mirror polishing on existing marble work/Granite work/stone work as in floors where ever required to give high gloss finish complete all as specified & directed

S&F in repairs 12.5 mm thick tapered edge gypsum moisture resistant board (seamless type) conforming to IS: 2095- Part I. false ceiling at all heights including providing and fixing of framework made of special sections power pressed from MS sheets and galvanized with zinc coating of 120g per sqm ( both sides inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts and bolt of required size and other end of angle hanger fixed with intermediate GI channels 45x15x0.9mm running at the spacing of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm at 450 mm centre to centre shall be fixed in a direction perpendicular to GI intermediate channel with connecting clips made out of 2.64mm dia x 230 mm long GI wire at every junction including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall / partition with help of rawl plugs at 450 mm centre with 25 mm long dry wall screws at the rate of 230 mm interval including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screw of size 3.5x25 mm at 230 c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compounds in three layers covering up to 150 mm on both sides of joints and including two course of primer & Acryllic Emulsion paint suitable for board all as per manufacturer's specification and also including the cost of making opening for light fitting, grills, diffusers cutout made with frame of perimeter channels suitably fixed, all complete as specified and directed by Engineer in Charge

Dismantling, floor, hearth or wall tiling/stone including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone agg) 25 mm thick for Sub base flooring complete all as specified & directed

M&L for non-skid coloured ceramic tiles not less than 7-8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed or bedding layer in cement mortar 1:6, complete all as specified and directed. (Note:- All as per designer concept approved by GE)

M&L for ultra charged vitrified tiles 12-15mm thick (or thickness as specified by manufacture), (square/ rectangular) polished, area of each tiles exceeding 0.36 Sqm but not exceeding 1.4 Sqm in flooring set and jointed in premium epoxy grout (Kajaria KE-100 or equivalent) to match the colour of tiles and including bedding of average thickness 6mm thick premium tile adhesive kajaria CX-1 or equivalent for laying of tiles on brick/concrete surface complete all as specified and directed. (Note: Rates Inclusive of Premium epoxy grout, premium tile adhesive and shall not be paid separately).

M&L for non-skid coloured ceramic tiles not less than 7-8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed or bedding layer in cement mortar 1:6, complete all as specified and directed. (Note:- All as per designer concept approved by GE)

M&L for non-skid coloured ceramic tiles not less than 7 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick screed in cement mortar 1:4, complete all as specified and directed. (Note:- All as per designer concept approved by GE)

M&L for glazed coloured ceramic tiles joint free size 450x300mm and thickness not less than 7 mm (square/ rectangular) on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick screed in cement mortar 1:4 complete all as specified and directed. (Note:- All as per designer concept approved by GE)

Taking up or down steel tubing with all fittings 15 mm bore pipe complete all as specified & directed

All as per Sl Item No.33.00 here-in-before but 20 mm bore pipe complete all as specified & directed

S&F tubes medium grade, galvanised with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified & directed

All as per item No. 35.00 here-in-before but 20 mm bore pipe complete all as specified & directed

S&F triple layer 500 Litrs Rotational moulded polyethylene (PVC) water storage tanks cylindrical vertical with closed top including nipple nuts and washers for fixing inlet, outlet/washout pipes and air vent pipes and incl dismantling water tanks & removing complete all as specified & directed

S&F 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule complete all as specified & directed

S&F in repairs bib taps brass chromium plated 15 mm bore size screwed down screwed for iron pipe or for brass ferrule complete all as specified & directed

S&F in repairs 15 mm dia stop cock/angle cock cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle, flench screwed both ends for iron or for union.complete all as specified & directed

S&F in repairs PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

S&F in repairs PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed.

S&F in repairs PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

S&F PVC bends 75mm bore, any radius complete all as specified & directed.

Supply and fix PVC bends 110 mm bore, any radius complete all as specified & directed.

S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia.fixed in repair complete all as specified & directed

S&F Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia.fixed in repair complete all as specified & directed

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggragate as in bed bricks, coping etc including weathering slightly rounded or chamfered angles and throating making grovves for fixing of man hole cover including necessary form work complete all as specified & directed

S & F PVC heavy duty waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed

S & F in repairs 2mm thick fiber glass reinforced translucent plain sheet fixed with and incl catch srew and nut bolts as in sun shade chajjas etc fixed in any position and height complete all as specified and directed.

S & F in repairs Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O,complete all as specified & directed

Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position complete all as specified & directed

M & L for clean sawn Timber framed and fixed Second class hard-wood in scantlings, trusses, purlins, rafters all as specified and directed.

S&F rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, reveting and / or welding or connecting with bolts and nuts (including revets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc, also for wedging, plumbing, truing up and fixing conf to Fe-410-W (Gde-E-250) quality A complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C-2 ( 40 mm graded aggrgate) as in plinth protection, path, sub base etc finished the surface even & fair complete all as specified & directed

S & F rolled mild steel plates ( plain on chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment conforming to Fe 410 W (Gde E. 250) quality ‘A’ complete all as specified & directed

Dismantling asbestos cement (Corrugated or Semi corrugated ) sheet including ridge as in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding/ridges to wall, fixed with self tapping screws in ridges as specified

S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of a colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified & directed

Material & labour for provision of GI frame work (snap grid) suitable for size as in false ceiling of size 605mmx605mm including fixing 4mm thick gypsum board /E-board in ceiling size 60cmx60cm fixed to metallic snap grid consisting of following and all as directed including dismantling wall and ciling boards or insulation boards/slabs any thickness including cover fillets. (i) Gi sections incorporated in frame work shall conform to designation given in IS: 737-1986. (ii) The snap grid shall conist of GI frame work main/cross tee of size 36.5mmx25mmx1.0mm thick and 25mmx25mmx1.00mm respectively. (iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of Supply and fix 2mm to 4mm dia mild steel Gi wire. (iv) The main and cross tees shall be jointed at junction/crossings with GI frame work angle bracket, of size 15mmx15mmx1.0mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer's instructions. (v) The snap grid(main/cross tee section) shall be supported at ends all along the wall with Gi frame work angle of size 25mmx25mmx1.00mm anodized thick (vi) Size of the snap grid shall be 605mmx605mm. (vii) Minimum average thickness of anodizing shall be 15 micron. complete all as specified & directed.

S & F galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

M&L for preparation of old surfaces of wall and including filling depressions of scrapped surfaces and minor crackes with wall putty and applying two coats of JK/ Birla wall putty & making the surfaces absolutely smooth of uniform thickness and after prepration of surfaces, again applying a coat of JK/ Birla wall putty over & including a coat of cement primer and again smoothening the same with sand paper and after preparing smooth surfaces, finally treating the surfaces with three coats of Asian Royal play metallic texture paint (first two coat as base coat & third coat as spray coat of approved colours) for texture finish surfaces complete all as specified and directed

M&L for stone slab 25mm-30mm thick stone dressed true and square, in one length not less than 60cm and n. exc 120cm in copings, window cills, chajjas, sunshades, etc., punched dressed on exposed faces and self faced on the embedded unexposed beds and joints; exposed edges rounded or chamfered as directed, set, jointed and pointed in cement mortar 1:4 complete all as specified and directed.

M&L for Mild steel angle iron door frame 40mmx40mmx6mm conforming to Fe 410-0 incl 12mm dia deformed bars for strengthing at bottom of chowkhats incl cutting floor at bottom to accommodated strengthing bars & making good the floor in PCC 1:2:4 type B-0 to match the existing floor complete all as specified & directed

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II).

M & L for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling, mass concrete and sub base of floor complete all as specified and directed.

S & F 06mm thick hollow insulated PVC wall lining consisting of PVC insulated panels having expended polystyrene (EPS) fitting into the wall by using nail etc. complete all as specified and directed.

S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (flushing cistern and flush pipe) fixed with ‘P’ or ‘S’ trap, including seat cover and making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

S&F in repairs wall mounted ceramic wash basin including pedestal colour as per site requirement 600 x 450 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling, waste pipe, bottle trap complete all as specified.

S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle including brackets and PVC flush pipe etc complete all as specified and directed.

S&F in repairs ,PVC(SWR) floor trap, 75mm bore, plain with grating including jointing with solvent cement complete all as specified & directed

S & F steel windows or ventilators fixed type, complete all as specified & directed.

S & F 3mm thick sheet glass, ordinary quality, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

M&L for 15-20mm thick black granite stone slab machine cut in cooking platform, jams, pillars, windows cills and the like laid over and including 15mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.

S & F in repairs door closer hydraulically regulated cast iron body designation no 3 universal tyoe suitable for door shutter of 851to 1000mm in with and weight between 61 to 80 kg of aluminium (die cast ) body complete all as specified and directed.

S&F in repairs CP brass soap dish complete all as specified & directed

S &F Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head screwed for 15mm dia pipe fixed in repair complete all as specified & directed

S&f in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified & directed

S&F fancy type glass corner fancy type of size 250mm x 250mm of 6 to 7mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed.

S&F in repairs chromium plated towel rail 20mm dia D type 600 mm long as a approved quality.complete all as specified and directed.

S & F 25mm dia Stainless steel decorated curtain rod with braket and ring complete all as specified and directed.

M & L for anodised aluminium partition with/without sash bars, aluminium sections weighing 0.55 Kg/m(min) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading,screws suitable anodised fittings, including anodised aluminium frame with one or more rebates including 5 to 6 mm thick glass all fixed to frame including dismantling old partition complete as directed

S&F in repairs stainless steel silver and black name plate (Upto 30 letters each one side written/engraved in hindi and english at other side) for office wall mounted (size 300mmx200m) on stainless steel rod and complete hanging arrangement complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for RCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified & directed

S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for Form work to sides and soffits of beams lintels etc for rough finished flat surfaces of concrete complete all as specified & directed

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed .

M & L for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, sheathed, copper conductor cable in and including PVC concealed conduit of not less than 20mm dia complete with all accessories/fittings, brass screws, washer etc, including modular boxes, modular plates suitable for fixing modular switches/sockets and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, sheathed and connected to common earth and earth duly complete all as specified and directed for One tube light/Bulb/ Bldg security light point controlled by one, one way switch 05 / 06 Amps.

All as per item No 95.00 here-in-before but One fan point / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed .

All as per item No 95.00 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed ..

All as per Ser item No. 95 here-in-before but One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed .

All as per serial item No 95.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed .

All as per serial item No 95.00 here - in - before but with 4 Sqmm nominal cross sectional area copper conductor FRLS cable and including PVC Conduit 20 mm dia or heigher medium grade socket outlet point on independent board complete all as specified and directed .

S&F Modular Switch, 1 module, 6A, AC, 240V, one way ISI Marked complete all as specified and directed .

S&F Modular Socket, 2 module, 6A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed .

S&F Modular Socket, 2 module, 6A / 16A, 2/3 pin combined, AC, 240V, ISI Marked complete all as specified and directed .

S&F Modular Switch, 1 module, 16A, AC, 240V, one way ISI Marked complete all as specified and directed .

S & F lamp holder (Angular / Straight), insulated body, with back plate all as specified and directed.

S & F LED lamp 9/10 watt complete all as specified and directed .

S & F wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed.

S & F decorative LED tube light fitting 10 watt wall mounted with extruded polycarbonate ,integrated lamp & driver with opal diffuser and decorative end plates complete with all accessories and fixing material complete all as specified and directed.

S& F in repairs LED Recess mounted panel 2X2 48 watt 240 V LIGHT FITTING WITH HEAT EXCHANGER UNIT all as specified and directed

S & F 35W LED building security light energy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including all material required for fitting all as specified and directed

S & F of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing incl taking down old u/s submain wiring complete all as specified & directed.

S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces incl taking down old u/s DB's complete all as directed .

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed.

S & F Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Amps and making connections complete all as specified & directed.

S & F MCCB 4 pole 100 Amps , Breaking capacity 25 KA Fixing arrangment and making connection complete all as specified & directed.

S & F Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, with provision of 16 KA 125 Amp G frame MCCB. Make- Legrand/Schneider/ABB with the inbuilt provison for fixing of 1 No MCCB and 12 Nos MCB'S inside of DB, with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as directed .

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

S & F SPN Enclosure with 2 pin earth plug socket complete with one 20 Amps MCB all as directed.

S & F Exhaust fan with louver PVC and fixing accessories 230 Volt and 250 mm sweep complete all as specified and directed .

S & F ceiling fan with fan regulator 1200 mm sweep 5 star rating BEE ,BLDC Fan , AC,230V complete all as specified and directed .

Taking down existing Exhaust fan 250 / 300 mm of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed .

Taking down existing ceiling fan of any size, CeiIing cable end,dismentalling blades ,make one set of three blades and keep them safe to deposited to E/M yard complete all as specified and directed .

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.

M&L for machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-35 Grade with grey cement and pigment complete all as specified

M&L for Sand for cushioning, including spreading and levelling in layers n exc 25 mm thick complete all as specified and directed .

Removal of surplus spoil upto a distance n. exc 50 M complete all as specified and directed .

Supply , fabrication, installation and testing of GI sheet ducting 24 gauge with louvers and making rectangular cavity in wall for proper exit of warm air suitable as per environment condition and making all surfaces finished and paints as per existing wall colour complete all as specified and directed by Engr-in Charge.

Supply and laying of rubber mat of size 1000mm and 12.5 mm thick complete all as specified and directed by Engr-in-Charge.

Supply and laying of vibration shock pads for drying machines complete all as specified and directed by Engr-in-Charge.

Manglam Engineers and Construction Co (BID ID -3058836)

SA construction co. (BID ID -3067726)

Arun Construction Co. (BID ID -3058732)