REPAIR TO TILING, BRICK WORK, JOINERY, PAINTING, PLUMBING WORK, FALSE CEILING, ROOFING, PANELLING AND MISC REPAIRS IN BLDGS AT KAPRA, BHALRA, GHATIMORE AT BHALRA MIL STN UNDER GE (I) 873 EWS

Amount

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position complete and removing rubbish from the site, complete all as specified and directed.

75 mm thick plain cement concrete (1:3:6), type C-2 using 20mm graded stone aggregate as in plinth protection and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of bitumen 85/25 grade and three part of sand by weight all as specified and directed.

75mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring and paving finished even and smooth without using extra cement, complete all as specified & directed.

Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specifed.

10mm thick plastering in cement mortar 1:6 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

15mm thick plastering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified.

5mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling, surface finished even and smooth without using extra cement, complete all as specified.

Preparation of new plastered surfaces of wall and applying two coats of white wash, complete all as specified.

Preparation of new plastered or concrete surfaces of wall and applying two coats of cement base paint, complete all as specified.

Preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

25mm thick plain cement concrete 1:2:4 nominal mix, type B-0, using 12.5mm graded stone aggregate as in levelling course, rough finished, complete all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar including removal of debries outside cantt area, complete all as specified and as directed.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM (1:4) complete all as specified and directed.

Non-skid coloured glazed ceramic jointless tiles of any shade and any pattern of size (Pattern consists combination of two or more tiles) area of each tile exc 0.11 Sqm but nexc 0.18 sqm, 7/8mm thick, over and including 15mm thick screed bed in CM 1:4 as in floors etc. jointed in neat cement slurry and pointed in coloured cement to match coloured tiles, complete all as specified and directed.

Glazed JOINT FREE ceramic coloured tiles in skirting/dado 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match required shade over and including 10 mm thick cement plaster in cement mortar 1:4 as backing coat rough finished surface complete all as specified.

16mm to 18mm thick of size not less than 53 x 53cm, machine cut Kota stone slab flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing, over and including 20mm thick screed bed or bedding layer of cement mortar 1:4 all as specified and as directed.

16mm to 18mm thick machine cut Kota stone, as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified

Taking down chowkats or frames including shutters (without taking off shutters from the frame) n exc 1.50 sqm each, complete all as specified

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each, complete all as specified and as directed.

1.25mm thick pressed steel frames with one shop coat of red oxide primer 125 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

1.25mm thick pressed steel frames with one shop coat of red oxide primer 165 x 60 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges (ISI marked), lock strike plate, including cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in filling hollow of frame with plain cement concrete and hold fast after tarring of hollow portion of frame complete all as specified and directed

35mm thick, 2nd Class hard wood, factory made, glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and as directed.

30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.

Powder coated aluminium frame for door/ window/ ventilator with one or more rebates not less than 2mm thick including jointing cleats for fixing etc complete all as specified and directed.

Powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Sheet glass ordinary quality, 5mm thick, in aluminium doors/windows exceeding 0.50Square metre in each pane, complete all as specified.

Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

Aluminium anodized barrel tower bolt of extruded section and fixed complete of Size 100mm long complete all as specified and directed.

Aluminium handle cast type anodized of size 100mm complete all as specified and directed.

100mm size hasp & staple, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.

Mild steel sliding door bolt, bolt type, stove enamelled black, with bright bolt not less 12mm dia, with and including a minimum of 6 bolts and nuts, 4 on bolt plate and 2 on stapple plate, 250mm long (ISI marked), complete all as specified.

Mild steel barrel tower bolts, stove enamelled black, with bright bolt, 150mm long (ISI marked), complete all as specified.

Mild steel pressed handle, oval type, stove enamelled black, 150mm long (ISI marked), complete all as specified.

100mm mortice lock, aluminium, vertical type with 2 lever, brass fixed in repairs complete all as specified

Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, complete all as specifed.

300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel fixed with screws to wooden frames or welded to iron frame, complete all as specified.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs, complete all as directed.

25mm dia MS curtain rods PVC coated of 1mm wall thickness in one length as per door/window, designed and colour shall be as approved by E-I-C, fixed with MS bracket of suitable size including fancy stoppers, fixed in repair, complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads.

3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed at site.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Mild steel framed work as in doors or gates, study table and similar works of angle or other section with gusset plates, rails, braces, etc., complete drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 grade-E-165, complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.

Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, Gde-O quality, with 120grams/sqm zinc coating and Gde 'B' (i.e. 12.5 mm) corrugation complete, all as specified and as directed.

Refixing Galvanised, corrugated mild steel sheeting, with two corrugation side lap fixed with 'L' type or 'J' type or cranked hooked bolts with washers in roofs, 0.63mm thick, complete, all as specified and as directed.

0.63mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and as directed.

Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.

Self tapping screws 75mm long and fixed from roof top with necessary T&P upto double storey height buildings, complete all as directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc.) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and as directed.

4mm thick non asbestos fibre cement building boards laid / inserted to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40mm x 30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and scrwed at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleats and steel expansion fasteners with and including ceiling section (not exceeding 1.20 metre length) of 0.55 mm thickness having kurled web of 50mm and flanged of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457 mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed.

12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work all as specified and directed.

PVC panelling made up of PVC hollow panels 25 / 30 cm in width and 10mm thickness, interlocking pattern, of approved shade and design, fixed to walls or ceilings all as per the manufacturer's instructions, fixed in repairs, complete all as specified and as directed.

2nd class hardwood plain cover fillets square, rectangular or triangular in section, sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm complete all as specified and as directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), white colour, hoisted and fixed in position, including over flow and drain out pipe complete of 500 litre capacity including taking down old unsv tank, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top), white colour, hoisted and fixed in position, including over flow and drain out pipe complete of 1000 litre capacity including taking down old unsv tank, complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms), complete all as specified and directed.

Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed to 20mm bore dia of pipe (Minimum weight 210gms) fixed in repairs, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection including cleaning for re-fixing complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 15mm dia complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20mm, complete all as specified and as directed.

Refixing old steel tubing and connections in new or old position with all fittings retrieved from taking down here-in-before and fixed (walls, ceiling, floors, etc.) of 20mm dia complete all as specified and as directed.

Bib tap, long neck, cast copper alloy CP, fancy type, with capstan Head handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule, fixed in repair, complete all as specified and directed.

Bib tap standard of PTMT ( colour as ordered), screwed for 15mm bore GI pipe ( Min weight 90 gms) , all as specified.

Stop valve CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Pillar taps, cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, fixed in repair, complete all as specified and as directed.

Stop valve , cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 20mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Gun-metal, globe or gate valves of 15mm dia, with iron wheel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified.

Gun-metal, globe or gate valves of 20mm dia, with iron wheel head, screwed both ends for iron pipe, fixed in repairs, complete all as specified.

Brass chromium plated wall mixer for mixing hot & cold water, single hole, screwed doen for bore of pipe 15mm, fixed in repairs, complete all as specified & directed.

Brass chromium plated basin mixer for mixing hot & cold water, single hole, screwed doen for bore of pipe 15mm, fixed in repairs, complete all as specified & directed.

Water jet for EWC chromium plated with PVC connection, fixed in repairs, complete all as specified & directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position in repairs, complete all as specified and as directed.

Angle stop valve, CP, cast copper alloy with crutch or butterfly handle, screwed down, high pressure screwed both ends for 15mm bore iron pipe or for unions, fixed in repair, complete all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15mm bore pipe (minimum weight 60 gms), fixed in repairs, complete all as directed.

10 litres capacity PVC low level flushing cistern of approved make complete with PVC flush pipe and connection to water closet, fixed in repair, complete all as specified and directed.

Vitreous China, wash hand basin, flat back white of size 580mmx450mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC 32mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends, complete, fixed in repairs, complete all as specified.

Vitreous china Orissa pan of pattern, long pan size 580mm x 440mm, with ‘P’ or ‘S’ trap, front or back inlet and integral foot rest complete including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe, and anti siphon pipe, fixed in repairs complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including ‘P’ or ‘S’ trap, white seat cover with flat bottom and mild steel CP hinging device, CP brass jet nozzle with 1500 mm long PVC pipe, fixed in repairs, complete all as specified and directed.

PVC connection 60cm long fitted with PTMT nut and washer on both ends, fixed to 15mm bore iron pipes, complete all as specified and directed.

Grating doom 100mm dia of PTMT (Minimum weight 25 gms), fixed in repair, complete all as specified and as directed.

Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified.

Towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, fixed in repairs, complete all as specified.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, hoes, bends, swan-necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories), complete all as specifed.

PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed in repairs, complete all as specified & directed.

Mild steel sheet eaves gutters, galvanised class 3, half round with rounded edge including brackets, thickness of sheet 1mm, 100mm dia, complete all as specified & directed.

110mm bore PVC (SWR) bends any radius, complete all as specified.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity above exc 250 litre but up to 500 litre, complete all as specified and directed.

Cleaning and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes of any dia etc. repairs to minor cracks, stopping leaking inlet/outlet with approved sealant, disinfecting the tanks surfaces by suitable methods including writing cleaning date on tank with paint for capacity exc 500 litre but not exc 1000 litre, complete all as specified and directed.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Prepration of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified.

Preparation of new wooden surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

Prepration of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint, complete all as specified.

French polishing on old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats, complete all as specified & directed.

M/S KOTWAL CONSTRUCTIONS

A S CONSTRUCTION

SHARMA TRADERS

Bidder Name

m/s vaid contractor and builders

SHARMA TRADERS

M/S KOTWAL CONSTRUCTIONS

A S CONSTRUCTION