REPAIR / REPLACEMENT OF JOINARY, PLUMBING FITTINGS ETC AND ALLIED B AND R MAINT WORKS TO CERTAIN BLDGS AT DHANA MIL STN.

Amount

Taking down wooden chowkhats or frame area exc 1.5 Sqm and not exc 4 Sqm Each with shutter (without taking off shutter from frame), complete all as specified and directed.

All as per item No 1 above but not exc 1.5 Sqm Each, complete all as specified and directed.

Taking down wooden shutter of any description exc 1 Sqm and not exc 2 Sqm Each complete all as specified and directed.

Supply & fixing 2nd class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete including treating the ends of chowkhats with coal tar/black paint etc, complete all as specified and directed.

Supply & fixing 105 x 60 mm size Pressed steel frames 1.25mm thick for doors with one rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete all as specified and directed.

Supply & fixing 165 x 60 mm size Pressed steel frames 1.25mm thick for doors with two rebate including necessary fixing lugs, hinges, lock strike plate, and making good with plastering in CM 1:4 including distempering as required at site etc, complete as specified and directed.

Supply & fixing 35mm thick factory made second class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive gauze with sash bars, edges of framing plain fitted with cut and mitred beads (all around of 1st class soft wood) for securing wire mesh or glass, size of members of shutter as specified in SSR Pt-I Sec-8 clause 8.24(b) fitted to chowkhats, complete as specified and directed.

Supply and fixing 35 mm thick 2nd class HW plain, framed, factory made paneled shutters (two panels), with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), cleaned seasoned and chemically pressure treated, complete all as specified and directed.

Supply & fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr in Charge.

Supply & Fix 18 mm thick Plywood over door / window frame and walls in girth not less than 0.60 M in interior decoration complete with necessary fitting like glue or any other binding material and ply filling in gap between wall and Plywood frame etc, complete all as specified and directed by Engr in Charge.

Supply & Fix 8 mm thick Plywood over door / window flush Shutters in interior decoration fixed with glue or any other binding material for groove cutting or any other design, complete all as specified and directed by Engr in Charge.

Supply & Fix 1.00 mm thick laminates / Sunmica/ decorative face veneers in any design/colour/pattern over door / window flush Shutters or Plywood in interior decoration fixed with glue or any other binding material, complete all as specified and directed by Engr in Charge.

Supply & Fix fancy brass assembly handle lock with Key set in interior designed flush shutters any size and colour complete all as specified and directed by Engr in charge Make:- godrej / Link

Supply & Fix fancy brass handle size not less than 200 mm in interior designed flush shutters any colour complete all as specified and directed by Engr in charge. Make:- Godrej / Link

Supply & Fix shuttering Magnet complete all as specified and directed.

Supply & Fix pointed backside door stopper complete all as specified and directed.

Supply & Fix S/S Hinges size 100 mm in L type or any other type complete all as specified and directed.

Material & labour in repair 18/19 mm thick prelaminated particle board, interior graded, prelaminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in Shutter of Cupboards/Kitchen cupboard with teak beading of all sides, complete all as specified and directed.

Supply & fixing solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet & edges will be painted to match with printed sheet as reinforced with M.S. square tube and fixing in opening as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.

Supply & fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.

Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyester paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyester powder up to 50-60 microns thick outer frame section 72x55 mm, centre mullion section 72x50 mm, shutter section 47x20 mm, fly mesh section 40x20 mm and the fixed glass beading section 12x12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for guard bars/grills, the section cut to length miter jointed with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine Monomer ) gaskets including fixing window with concrete/stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (Minimum 4 nos for 1600mm high windows, 3 Nos for 1200 mm less window and 2 nos in ventilator ), including 10 mm square bars welded to 6x12 mm flat at a distance 125 mm c/c etc as per direction of engineer in chaege. Note:- Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2

Supply & fixing for plain sheet glass 4mm thick, glazing in aluminium frames and MS pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

Supply & fixing for frosted glass / tinted glass 4mm thick glazing in aluminium frames and MS pre coated frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

Material & labour for mild steel work in framed work such as grills, gratings, guard bars etc., including angle frame and hinges where required with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290.Gde-E-165, complete all as specified and directed.

Material & labour for mild steel 0.63 mm thick, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joint with riveted or welded seams, including bending or turning up mitred angles etc as requires, complete all as specified and directed.

Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings etc, complete all as specified and directed.

Supply & fixing in repairs sheet glass ordinary quality & glazing with wooden bead/oil putty in Square n.exc 0.5 Sqm in Each panel 3 mm thick complete all as per specified and directed.

Supply & fixing galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply & fixing in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples, complete all as specified and directed.

Supply and Fixing of Stainless steel Drapery Rods (curtain rods) of 25 mm dia along with all accessories as per requirements such as Holding Bracket, Finials (End capping), screws, fissures etc. Including fixing of same on the desired door windows locations on all floors and in any length, complete all as specified and directed.

Supply and fixing 100 mm butt hinges medium weight cold rolled mild steel ISI marked fixed with screws complete all as specified and directed.

Supply & fixing 150mm extruded aluminium alloy handles, fabricated type anodized, complete all as specified and directed.

Supply & fixing 150mm long aluminium anodized barrel tower bolt of extruded section, complete all as specified and directed.

Supply & fixing 300mm long aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast of extruded sections and fixing bolt and sliding bolts of extruded sections of cast aluminium alloy, complete all as specified and directed.

Supply & fixing 500 Ltr capacity rotational mounded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 15mm bore PVC float valve high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe complete and including disconnecting unserviceable PVC/Cement water storage tank of 500 Ltr capacity and removing outside MD land complete all as specified and directed

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed.

Supply & fixing steel water tubing medium grade galvanizes fixed to walls, floors, roof ceiling etc including all tube fittings of 15mm bore complete all as specified and directed.

Supply & fixing in repair 20mm bore ball valve, high pressure with epoxy coated aluminium rod and high density plastic valve screwed for iron pipe and fixed of 25mm dia (min wt 455 gram) complete all as specified and directed.

Supply & fixing in repair vitreous china wash basin white flat back size 450x300mm including 15mm dia fancy type PVC pillar taps, PVC waste pipe, PVC waste coupling brackets, PVC connections 15mm dia 450mm long, complete all as specified and directed.

Supply & fixing in repair Bib tap 15mm standard of cast copper alloy chrominium plated with crutch or butterfly handle screwed down for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm stop valve standard of cast copper alloy with crutch or butterfly handle high pressure screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing in repair 15mm dia shower rose of PTMT any colour high pressure screwed for iron pipe and fixed (min wt 40 gram ) complete all as specified and directed.

Supply & fixing HDPE pipes of pressure rating 6kgf/sqcm of 40 mm dia fixed/concealed on walls or floors complete all as specified and directed.

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat, black, closed pattern with flat bottom and cover with mild steel chromium plated hinging devices and chromium plated Jet arrangement with 1.00 mtr long flexible pipe for fixed with suitable system complete all as specified and directed.

Supply & fixing as in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, and PVC connection 15mm dia complete all as specified and directed.

Material & labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of Pink primer complete all as specified and directed.

Material & Labour for complete removal of old finishes i.e white wash; pili matti etc. and applying two coats of Oil bound distemper over a coat of 1.5mm thick putty layer average putty, complete all as specified and directed.

Material & Labour for preparation of old surfaces and applying two coats of white wash on ceiling, complete all as specified and directed

Demolition of un-reinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness. (Below or above ground level), complete all as specified and directed.

Material & labour for 40 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth with using extra cement, complete all as specified and directed.

Supply & fixing glass dividing strips, 38 x 3 mm thick and inserted in position, confirm to design, complete all as specified and directed.

Material & labour for 50mm thick cement concrete (1:3:6) type C-1 using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection including forming joint to full depth at every 3.0m in forming and at every change of direction and filled mixture of bitumen and sand (1:3) by weight, complete all as specified and directed.

Supply & fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing and as described in SSR Part I, complete all as specified and directed.

Supply & fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as and described in SSR Part I, complete all as specified and directed.

All as per item no 54 above but wood grain printed PVC sheet used instead of plain colour sheet, complete all as specified and directed.

All as per item no 54 above but single side prelam PVC sheet used instead of plain colour sheet, complete all as specified and directed.

Supply & fixing PVC tank cover black color or matching with tank colour with two pvc bracket and nuts to fix with existing PVC water tank of different capacities such as 250/500/1000 ltrs capacity, complete all as specified and directed.

Supply and fixing 10 to 15 mm Toughened glass door shutters including necessary jointing cleats, glazing clips, rubber neoprene packing, stainless steel fittings such as handle 2 nos, 100mm hinge 3 nos, lock including keys 1 set, Stainless steel snap beading & screws complete all as specified and directed.

Supply and fixing frosted film or logo in any type or design and size complete all as specified and directed.

Material and labour for Double action Floor Spring Hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty and fixed for toughened glass door etc, complete all as specified and directed.

Demolition of brick / stone masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Material & labour for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc, complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces using integral water proofing compound 3% by weight of cement and finishing the surface even and smooth without using extra cement complete all as directed and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified & directed.

Material and labour for applying two coats of White wash on new wall surfaces complete all as specified and directed.

Material and labour for 10mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surface even and smooth without using extra cement complete all as directed and directed.

Demolition and breaking of drains pipe (salt glazed stone were, AC, RCC or PVC pipe) set in cement mortar 100 mm internal dia pipe, complete all as specified & directed.

Supply and fixing 110 mm dia bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified & directed.

Supply and fixing PVC (SWR) bends any radius 110 mm bore, complete all as specified & directed.

Supply and fixing 75 mm dia bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls, complete all as specified & directed.

Supply and fixing PVC (SWR) bends any radius 75 mm bore, complete all as specified & directed.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs 20,300.00 /- ]

siddhant construction