SPECIAL REPAIR TO BLDG NO P-64 TPT COY and SPECIAL REPAIR OF BOUNDARY WALL AT BMC AREA UNDER GE(C) KOLKATA

Amount

NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates. (ii) It is highlighted that the cretin condition of General Condition Of Contracts (IAFW-2249) has been modified as direction of MOD i.e inclusion of performance security, deletion of risk & cost provisions and increase in defects liability period all as specified in tender document. The tenderers should keep in mind while quoting their offer SCHEDULE 'A' PART - I FOR B/R PORTION (Sl No 02 to ___ )

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and labour for Plain Cement concrete M-10(Nominal Mix) using 40 mm graded stone aggregate in base of angle iron post complete all as specified and as directed.

Material and labour for fly ash Brick work with bricks class designation 75, old size, straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 complete all as specified and as directed.

Material and labour for old servicable brick work with bricks straight or curved on plan exceeding 6 m mean radius built in Cement Mortar 1:6 completes as and specified and directed. Note:-The brick shall be re-used obtained from demolition of brick work at relevant items of BOQ.

Material and labour for Plain Cement Concrete1:3:6 using 20 mm graded stone aggegate as in bed block or fixing of hold fast including form work all as specified and directed.

Material and labour for reinforced cement concrete (design mix M-25) using 20mm graded stone aggregate) in foundations including rafts footings foundation beams plinth beams bases for coloumns etc basement slabs under reamed piles and complete all as specified

All as per item No 07 here-in-before but as in columns

All as per item No 07 here-in-before but in lintel,beam

Use and waste of formwork to sides of concrete foundations footings bases of coloumns, plinth beams and similar work with rough finished surfaces complete all as spd and directed.

All as per item No 10 here-in-before but to sides of pillars, posts, columns of square, rectangular or polygonal shape with fair finished surface complete all as spd and directed

All as per item No 10 here-in-before but to sides and soffits of lintels, beams and the like

Demolition of cement concrete (reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified

Material & labour of high strength steel Fe-500 TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

All as per item No 14 here-in-before but as in strrup bar of dia 8mm and over

Dismantling wrought iron or mild steel work of any description not other wise provided etc complete all as specified & as directed.

Material & labour for mild Steel angle posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 (Gde E-165) complete all as specified and directed.

Supply and fixing of CONSEC-ZAL Super Razor punched barb tape concertina coil (helix coil with and including necessary GI fixing clips for securing complete all as specified and directed with as per specification fixed on the 'Y' or 'U' shape of MS angle :- (i) Dia of coil (when unstretched) - 610 mm (ii) Nos of Spiral - 6 Spirals per RM (iii) Weight of each coil with hessian pack - 8.50 Kg (+0.50) (iv) Coverage per coil - 8 RM(maximum) (v) Central core wire - made from 2.60 mm dia GI-H.T.S.S. wire as per IS - 4454 galvanised as per IS-2629 (vi) Razor Punched Strip - Razor Punched Tape is CONSEC-ZAL steel comprising of Aluminium base with Zinc coating @ 150 gm/Sqm confirming to ASTM A-792/A-792M with additional primer treatment of Epoxy / Polyurethane and final paint top coat of Caulfield green shade (BSL 139) by hot dipping processes. Note : - Running length of the wall / fencing shall be measured and paid in above item. Make:- GLOBAL TECHNOCRATS PVT. LTV. / SHIVA ENGINEERING CO. or as approved by AO

Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts

Supply and fixing of chain Link 3 mm dia , 75mm x75mm mesh size of mild steel galvanized fencing (minimum weight 3.00 Kg per Sqm) with PVC coating and including fixed with straining bolts incl provision of binding wire etc including dismantling of existing fencing complete all as specified and as directed.

Material & labour for Mild steel screw bolts 5 to 10 mm dia (machine made) with heagonal or square heads with washers and one hexagonal or square nut , exceeding 15 cm but not exceeding 22.5cm long complete all as specified and directed.

Material & labour for mild steel work as in bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material & labour for Mild steel Round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.

Material & labour for Structural mild steel, rolled section of grade Fe-410-W(Gde E-250) (quality B) framed work as in doors or gates of angle or other section with gusset plates, rails, braces, and mounting arrangement etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. To be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal outside of MOD land complete all as specified and as directed.

Rendering 15 mm in Cement Mortar 1:4 on other than fair faces of brick work or concrete surfaces, finished fair and even smooth without using extra cement to the plastered surface complete all as specified and as directed.

Material and labour for Rendering 15mm thick plaster in Cement Mortar (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth without using extra cement, with water proofing treatment. Note:- Water proofing compound shall be measure and paid separately

Material and labour for preparation of new surfaces and applying applying 2 coats of cement based paint

Material and labour for Preparation of old wall surfaces including complete removal of existing treatment and applying 2 coats of cement based paint over a coat of alkali based primer

Material and labour for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed..

Material and labour for Preparation of old steel surfaces including complete removal of existing treatment and applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed..

Supply only water proofing compound

Material and labour for fly ash brick work with bricks class designation 75, size as per old size brick, straight or curved on plan exceeding 6 m mean radius half brick thick walls built in Cement Mortar 1:4 complete all as specified and as directed.

Rendering 15 mm in Cement Mortar 1:6 on fair faces of brick work or concrete surfaces finished even smooth without using extra cement to the plastered surface complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to stores and rubbish off the MOD premises complete all as specified and as directed.

Material & Labour Non skid ceramic tiles, coloured, 7 to 8 mm thick (square/rectangular area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed layer in CM (1:4) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushign neat cement slurry with 3.0 kg of cement per Sqm complete all as specified and as directed.

Material & Labour Glazed ceramic tiles 400x300x7 mm(Coloured) on vertical surfaces such as skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete over 10mm thick screed bed vertical layer in CM (1:4)all as specified and as directed.

Material and labour for Precast Reinforced Cement Concete cover slab type M-20(Nominal Mix) using 20 mm graded stone aggregate, set in Cement Mortar (1:4) complete all as specified and as directed .

Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Stripping out tarfelt from old roof surfaces and removing unserviceable materials from site of work in low laying in outside MOD area complete all as specified and as directed.

Material and labour for bedding layer of mortar 15 mm thick in Cement mortar 1:4 after over a coat of cement slurry at 3 kg per sqm on exsisting roof surfaces, top surface finished even and smooth using extra cementt complete all as specified and as directed.

Supply and fixing of conceled 15mm bore galvanised steel tubes, medium grade and including all fitting& fixture and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed.

Supply and fixing in repair of bib cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. Make :- Cat no F3002152 of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of stop cock , concealed type cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no F3002361 of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repair of chromium plated pillar cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS 02 H of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of vitreous china wash basin white flat back, size 550 x 400 mm including waste coupling, PVC corrugated waste pipe fixed with GI pipe brackets & , rag bolt in cement concrete/brick wall and including taking down existing HWB and making good wall surface complete all as specified and as directed. Make: Cat no S2040103 wash basin of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing as in repair of PVC low level flusing cistern 10 litres capacity white with ball valve & brackets with flush pipe complete all as specified and as directed. Make: CHIVAS of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing as in repair of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed.

Supply and fixing of Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white with including CI ‘P’ or ‘S’ trap & integral foot rests fixed in cement concrete and including taking down existing one complete all as specified and as directed Make: CALINA S3010102 & S9030101 of CERA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of Unplasticized (uPVC )of type-A for use in ventilation pipe work and rain water and rain water harvesting, single socket, 110 mm bore in any length including rubber ring joints and fixed to walls with clips , other standard material and including taking dwon old rain water pipe & removal from site all as specified in IS 13592 complete all as specified and directed.

Supply and fixing of Unplasticized (uPVC )of type-A for use in ventilation pipe work and rain water and rain water harvesting, single socket, 75 mm bore in any length including rubber ring joints and fixed to walls with clips , other standard material and including taking dwon old rain water pipe & removal from site all as specified in IS 13592 complete all as specified and directed.

Supply and fixing of Unplasticized (uPVC )bendl for 110 mm bore uPVC pipe complete all as specified and directed.

Supply and fixing of CP waste coupling including 32mm bore PVC waste pipe (heavy duty) 90cm long complete all as specified and directed.

Supply and fixing of Unplasticized (uPVC )juction equal or unequal for 110 mm bore uPVC pipe complete all as specified and directed.

Supply and fixing of Unplasticized (uPVC )juction equal or unequal as per IS 13592 for 75 mm bore pipe complete all as specified and as directed.

Supply and fixing of Unplasticized (uPVC )bend as per IS 13592 for 75 mm bore pipe complete all as specified and as directed.

Supply and fixing of Unplasticized (uPVC ) cowl for 110 mm bore uPVC pipe complete all as specified and directed.

Supply and fixing of Unplasticized (uPVC ) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Material & labour of Cast iron soil, waste and vent pipe, spun pipe, 100 mm bore in any length with or without ears with cement joints fixed on walls and including taking down existing wast pipe line all as specified & directed.

Material & labour of Cast iron soil, waste and vent pipe, spun pipe, 75 mm bore in any length with or without ears with cement joints fixed on walls and including taking down existing wast pipe line all as specified & directed.

Material & labour of CI (Spun) bends for 100 mm bore pipe complete all as specified and as directed.

Material & labour of CI (Spun) bends for 75 mm bore pipe complete all as specified and as directed.

Supply and fixing in repair of PTMT grating Doom fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified. Make :- Cat no 112/113 of Prayag or equivalent model of make list as given in PS as approved by GE.

Material and labour for Preparation of old wall surfaces and applying 1 coat of cement based paint over a coat of alkali based primer

Material and labour for preparation of old steel surface and applying one coats of synthetic enamel paint on old steel and iron surfaces of any description over exceeding 10 cm in width or girth complete all as specified and as directed.

Supply and fixing in repair of Glazing with sheet glass 4 mm(minmum) thick ordinary quality with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Material and labour for preparation of new surfaces and 3 coats white wash on ceiling complete all as specified and as directed.

Material and labour for preparation of old internal wall surfaces and applying a coats of white wash complete all as specified and directed.

Material and labour for preparation of old internal ceiling surfaces and applying a coats of white wash complete all as specified and directed.

Material and labour for Preparation of new surface and applying 3 coats white wash on walls complete all as specified and as directed.

Material and labour for Painting one coats of synthetic enamel paint on wooden surfaces of any description over 10 cm in width or girth including preparation of old surface complete all as spd & directed

Material and labour for plain, solid, straight, second class hard wood chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Material and labour for Aluminium handles cast type anodised 125 mm size complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 using 20mm graded crushed aggregate as in filling in holdfast/ filling in pressed steel frame etc including necessary form work complete all as specified and directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. exceeding 1.50 Sqm but not exceeding 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats/frames with shutters (without taking off shutters from the frame) etc. not exceeding 1.50 Sqm each complete all as specified and as directed.

Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 125 x 60 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with block board core and comercial plywood face panels with one face is covered with decorative face veneer with lipping/frame to match all complete all as specified and as directed.

Material and labour for 35 mm thick, second class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

Material and labour for Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild Steel square tube, suppling & fixing in opening as per drawing complete all as specified and directed.

Material and labour for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawingcomplete all as specified and directed.

Material and labour for Stainless steel wire cloth, 0.43 mm nominal dia of wire and avergae width of aperture 1.00 mm and fixed with stainless steel wire staples complete all as specified and directed.

Material and labour for Butt hinges medium weight, stainless steel (Gr-304)50 mm size complete all as specified and directed.

Material and labour for Butt hinges medium weight, stainless steel (Gr-304) 100 mm size complete all as specified and directed.

Material and labour for Aluminium anodised barrel tower bolts of extruded section size 200 mm complete all as specified and directed.

Material and labour for Aluminium anodised barrel tower bolts of extruded section size 150 mm complete all as specified and directed.

Material and labour for Aluminium anodised sliding door bolt, with hasp & staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections 300 mm long .complete all as specified and as directed.

Material and labour for Aluminium handles cast type anodised 150 mm size complete all as specified and directed.

Supply and fixing in repairof Towel Rail 600 mm long of chromium plated fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. Make :- Cat no F840013 F of Hindware or equivalent model of make list as given in PS as approved by GE.

Material and labour for Small fittings (1st Class hardwood) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exc 200 cu. Cm each complete all as specified and as directed.

Material and labour for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, and treating end of posts, backs of chowkats, holdfasts etc., area treated not exceeding 0.10 Sqm each, of any description and girth, not otherwise described, with tar or coal tar black paint complete all as specified and as directed.

Material and labour for Preparing surfaces of wood and wood based materials, steel and iron work, new or old, and treating end of posts, backs of chowkats etc., area treated exceeding 0.1 Sqm but not exceeding 0.50 Sqm each, of any description and girth, not otherwise described, with tar or coal tar black paint complete all as specified and as directed.

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs , beams, columns ,lintel,chajja, fin , facia etc. 50 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed.

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs ,lintel,chajja, fin , facia etc. 25 mm average thickness including tapering all edges, making square shoulders of cavities air and cleaning of exposed concrete surface of lightly picking materials by manual method including foreign materials , loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed.

Deduct / Add for below / over 5mm or part thereof thickness for item No 96

Removing of concrete all around reinforcement bar upto 12 mm dia from behind the reinforcing bars average 25mm (but not less than 15mm air gap)by manual methods (using wire brushing ,chiselling etc) and applying chloride free rust removing chemical on rusting steel reinforcement bar and removing all rust from steel reinforcement bar by emery paper and cleaning the area throughly by water and allow it to dry and totally rust free of reinforcement bar all as complete as per manufacturer's instruction as specified and as directed. Make( Rust removing chemical ):- Reebaklens RR of FOSROC or quivalents solutions SIKA/STP as approved by GE.

Material , labour and prepared existing reinforcement surface by brush and application two component epoxy zincrich primer on existing reinforcement surface of minimum specific gravity 1.75, adhesive bond strength with steel is 1.50N/mm2 and maximum coverage area 5.00 Sqm per litre complete all as specified and directed. Make- Nitozinc primer of FOSROC or equivalents chemical given in approved make list of PS.

Material and labour for introducing new reinforcement bars upto 12 mm dia for structural connection in RCC beams, columns, lintel and slabs including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and upto 200mm including power drilling,fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges etc all as specified and directed.

Material , labour and placing in position free flow shrinkage cementitious micro concrete of compressive strength, flexural strength shall not be less than 50 MPa at 28 days , 5MPa at 28 days respectively for strengthening of beams, columns & other structural elements of average thickness 50mm and including surface preparation & suitabletype formwork etc. as per manufacturers instruction complete all as specified and as directed.. Make(micro concrete):-Renderoc RG of FOSROC or equivalents solutions SIKA/STP as approved by GE.

Deduct / Add for below / over 5mm or part thereof thickness for item No 101+B118

Supply, materials and application of two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days , 7MPa at 28 days respectively ( maximum coverage area 1.3 sqm per 25 kg pack @ 10 mm thickness) over a coat of epoxy Bonding agent on existing surface for strengthening of beams, columns & other structural elements of average thickness 25mm and morter shall be applied in layers n.exc 6mm thick in layers and including surface preparation as per manufacturers instruction complete all as specified and as directed.(Any storey/ height of building/ structure) Note:- This item shall be execution where shuttering is not possible or small patch repairs of structural elements . Make(polymer modified reinstatement mortar):- Renderoc S2 of FOSROC or equivalents solutions SIKA/STP as approved by GE.

Material , labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction complete all as specified and as directed. (Any storey/ height of building/ structure) Make:- Concure LP90 of FOSROC or equivalents solutions SIKA/STP/ Maruti / Choksey chemicals.

Subtotal of Sch A part-I

SCHEDULE 'A' PART - II FOR B/R PORTION (Sl No 107 to 151 )

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and switch boxes etc complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC double lock casing caping and accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.25 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one light/fan point controlled by one no, one way switch complete all as specified and as directed.

All as per item no 108 above but for one socket outlet 5 pin 6 amps on independent board complete all as specified and as directed.

All as per item no 108 above but for one 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

All as per item no 108 above but for one light point controlled by 2 nos two way switch complete all as specified and directed.

Material and labour for point wiring with 2.5 Sq. mm (nominal area) PVC insulated and unsheathed single core FRLSH copper cable 1100 volts grade with multi-stranded copper conductor in and including double lock casing caping and accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLSH cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including 1.25 mm thick cadmium plated sunk MS pressed steel terminal boxes with 3 mm thick plastic laminated sheet cover fixed with brass screws complete for one socket outlet6pin15/16 amps on independent board complete all as specified and directed.

Supply and fixing switch piano type 5 Amp single pole one way complete all as specified and as directed.

Supply and fixing Switch piano type 5 Amp two way complete all as specified and as directed.

Supply and fixing in repair Bell push, flush type, 5 Amp complete all as specified and as directed.

Material and labour for Socket outlet 2 in 1,3 pin, 5A, 240 V, Flush type, on same board complete all as specified and as directed.

Material and labour for switch socket combination 5 pin 6 Amps, flush type, universal 240 Volts, complete all as specified and as directed.

Material and labour for switch socket combination 5 pin 5/16 Amps,flush type, 240 Volts, complete all as specified and as directed.

Supply & Fixing of stepped type electronic fan regulator flush type complete all as specified and as directed. MAKE : Code no 33070 of Anchor(Penta) or equivalent model of make as mention Appendix "B"

Material and labour for lamp holder insulated body with back plate for batten fittings with 10 Watt LED lamps complete all as directed

Supply and fixing of Metal distribution box with clad plug and socket and including SPN-MCB control 2 pin & earth plug with socket , 20 A, 240 Volts universal type complete with one MCB 20 A SPN 240 volt complete all as specified and as directed. Make :- Cat no 6078 43 of Legrand or equivalent model of make list as given in PS as approved by GE.

Supply and fixing for ceiling rose surface with ISI marked with valid CML no, three terminal complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCBs to be used singal pole & nutral double door 4 Way 200 Amps rated busbar and including fixed with 25mm x 6 mm mild steel clamp of suitable length complete all as specified and as directed.

S&F in repair sheet metal enclosure for MCBs to be used singal pole & nutral double door 8 Way 200 Amps rated busbar complete all as specified and as directed.

Supply and fixing of MCB SP of rating 6 to 32 Amps 240 V complete all as specified and as directed.

Supply and fixing MCB DP 5 to 32 amps 415 volts 10KA breaking capacity.

Supply and fixing of sub main wiring with two single core 4.0sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC double lock casing caping and accessories accessories including one single core 4.0 sqmm copper conductor cable FRLSH FRLSH as earth wire and including taking out old sub-main wiring complete all as specified and as directed. NOTE:- (a) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 20Watt with LED Lamp , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. mm copper conductor flexible wire/cable complete all as specified. Make : Model No SLE BT 20 MS of SURYA or equivalent model of make list as given in PS as approved by GE.

Supply and fixing of LED surface/ceiling mounting(suspended from ceiling) box type light fitting 10Watt with 10Watt LED tube , drive and made of epoxy powder coated extruded aluminium channel housing with high quality polycarbonate opal diffuser cover & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up three core1.00sq. Mm copper conductor flexible wire/cable complete all as specified. Make : Model No SLE BTN T8 10 W of SURYA or equivalent model of make list as given in PS as approved by GE. Note for items no 128 & 129 : (i) Warranty of complete LED luminaries fitting shall not less than four years and Life expectancy of LED's minimum 50,000 burning hrs,. (ii)The contractor shall be submitted the LM-79 third party NABL accredited lab test report and LM-80 test certificate and LED has to be stractured in the same sequence.

Earthing as in repair complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connetced with earthing wire 4.0mm dia as earthing lead by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 5 of MES Schedule Part-I complete including testing on completion. On testing after completion if the desired earth resistance is not obtained the earthing will be redone at no extra cost.

Supply and fixing in repair of stepped type electronic fan regulator flush type complete all as specified and as directed. MAKE : Code no 33070 of Anchor(Penta) or equivalent model of make as mention PS

Supply and fixing in repair switch piano type 5 Amp single pole one way complete all as specified and as directed.

Supply and fixing in repair of socket outlet 2 in 1,3 pin, 5A, 240 V, Flush type, on same board complete all as specified and as directed.

Supply and fixing in repair of switch socket combination 5 pin 6 Amps, flush type, universal 240 Volts, complete all as specified and as directed.

Supply and fixing in repair of switch socket combination 5 pin 5/16 Amps,flush type, 240 Volts, complete all as specified and as directed.

Material and labour for lamp holder insulated body with back plate for batten fittings with 10 Watt LED lamps complete all as directed

Supply and fixing in repair for ceiling rose surface with ISI marked with valid CML no, three terminal complete all as specified and as directed.

Taking down and opening out the ceiling fan/wall mounted upto1400 mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and reparing of slots complete including materials like split pin,rubber reel etc reassembling and refixing of fan complete including if any S required for fixing fan and incl 1.5 mtr length connecting rod all as specified and as directed. Note : Spare parts shall be measured & paid separately.

Supply only gun metal bush of suitable size for ceiling fan of sweep 1200mm/1400mm as per existing one complete.

Supply only ball bearing suitable for 1200/1400mm sweep Ceiling fan of any make.

Supply only capacitor of 2.5 mfd for C/Fan

Material and labour for painting of ceiling fan/wall fan/exhaust fan of any size and sweep complete with synthetic enamel paint by spraying including filling with cavities with filler, after cleaning all dust etc complete all as specified.

Taking down and opening out the exhaust fan upto450mm sweep for inspection, removing bush / bearing, cleaning of bush / bearing, replacement of unserviceable / worn out bearing / bush, shaft, removing burnt out coils from the slots, cleaning and reparing of slots complete including materials like split pin,rubber reel etc reassembling and refixing of fan complete including if any S required for fixing fan and incl 1.5 mtr length connecting rod all as specified and as directed. Note : Spare parts shall be measured & paid separately.

Supply only gun metal bush of suitable size forexhaust fan upto450mm sweep as per existing one complete.

Supply only ball bearing suitable for exhaust fan upto450mm sweep of any make.

Supply only capacitor of 35 mfd for exhaust fan upto450mm sweep

Taking down the serviceable UG cable of 50 Sqmm size or any other size after disconnecting from TPN DB and refixing the same after laying / fixing properly through cable protection pipe (Cable protection pipe shall be measured under separate item) and making connection with DB complete all as specified and as directed.

M & L for GI tube light grade 50mm bore with all fittings for cable protection in the wall / ground / roof including cutting chasis in the wall / floor and making good the disturbed surface and plastering and painting the disturbed surfaces complete all as specified and as directed.

M & L forpreparation of surfaces LT panel inside the bldg by scraping out old paint 10 cm width or girth of anydescription and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down exhaust fans any type / size / sweep complete with blades and frames from any height and refixing same serviceable exhaust fan after cleaning servicing and painting with one coat of synthetic enamel paint complete with copper flexible PVC cable 0.50 Sqmm twin core not more than one metre in length complete all as specified and as directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

BHASKAR SUPPLY AGENCY

PINKY CO

M/S S. K. SARKAR

S. K. CONSTRUCTION SYNDICATE AND ENGINEERING CO.

NIRMAL SALES CORPORATION

ARJUN DAS VALECHA