Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.0 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹23.4 L+₹96,310 (4.29%)Rejected-AOC 01 KHUMRIYAL KUPWARA KHUMRIYAL KUPWARA KUPWARA JAMMU KASHMIR 193223 | KUPWARA | JAMMU AND KASHMIR | 193223 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹24.2 L+₹1.7 L (7.78%)Rejected-AOC NAROO PO ICHIGAM BADGAM KASHMIR 191111 J K | ICHIGAM | BADGAM | JAMMU AND KASHMIR | 191111 | L3 | Rejected-AOC Rejected | |
| 4 | L4₹24.3 L+₹1.8 L (8.21%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹24.3 L+₹1.9 L (8.24%)Rejected-AOC 25 KASHIPUR KASHIPUR BALLIA UTTAR PRADESH 277001 | BALLIA | UTTAR PRADESH | 277001 | L5 | Rejected-AOC Rejected |
Tender Value
₹27 L
EMD Value
₹54,000
Closing Date
30 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Srinagar
Military Engineer Services Garrison Engineer (AF) Srinagar Air Force Station Srinagar-190007
REPAIR / MAINTENANCE TO E/M INSTALLATIONS AT VARIOUS LOCATIONS UNDER GE (AF) SRINAGAR
2022_MES_542076_1
GE(AF)SGR- 29 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE (AF) SRINAGAR
As per Tender doucments
10 documents required · 10 mandatory
₹500
GE (AF) SRINAGAR
₹54,000
Yes
28 Oct 2022
30 Jul 2022
31 Aug 2022
30 Jul 2022
30 Aug 2022
16 Aug 2022
Amount
Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class 'B' Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and as directed.
Taking down cement plaster of any description on brick or stone masonry wall, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.
M&L for Rendering 15 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge.
M&L for Rendering 10 mm thick in cement and sand mortar 1:3 on concrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified.
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash on wall, complete all as specified & directed.
M&L for preparation of newly plastered surfaces of walls including sides and soffits of beams, fascias, parapets etc and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge
M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls and applying three coats of white wash, complete all as specified & directed.
M&L for applying 2 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surface even & smooth for receiving distemper / paint of any description all as specified & directed.
M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid separately
M&L for complete removal of existing treatment from the old decorated plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, colour and tint as ordered, complete all as specified and directed by Engineer-in-Charge.
Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified..
M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes, complete all as specified & directed.
M&L for 10 mm thick rendering in cement mortar 1:4 to receive wall tiles, complete all as specified & directed.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.
M&L for coloured glazed ceramic digital wall tiles as in vertical surfaces of size 450 mm x 300 mm x 7 to 8 mm thick (with multi colour combination in pattern as directed), set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified & directed.
M&L for granite (of any type) work (table rubbed and polished) 20 mm thick as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over screed bed in cm 1:4, complete.
M&L for 20 mm thick machine cut kota stone slab flooring laid over and including 20 mm thick screed bed or bedding layer in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing, complete all as specified and directed.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 Sqm each, complete all as specified.
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.
S&F Pressed steel frames of 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including providing & filling, cement concrete Type C-0, 1:3:6 (12.5 mm graded aggregate) complete, as specified, supplied and fixed.
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, all as specified.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part-II , 2020 as specified and as directed by Engineer-in-Charge.
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain single side prelam PVC sheet used instead of plain colour PVC sheet with MS square tube S&F in opening as per specification and drgs and edges will be painted to match with prelam sheet complete all as specified.
S&F 125 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified.
S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified.
S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified.
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.
S&F 125 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.
S&F 150 mm long aluminium anodised, handle of extruded section fabricated type anodised and fixed, complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, all as specified and as directed.
M&L for preparation of old painted steel surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-Charge
M&L for preparation of old painted wooden surface of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, all as specified and as directed.
Dismantling wall and ceiling boards (fiber, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, & snap grid etc, complete all as specified.
S&F snap grid for false ceiling of size 600 mm x 600 mm grid EXPOSED GRID SYSTEM fabricated with glavanised iron powder coated section all as shown on serial page No 185 of SSR part II (2020 print) complete all as specified directed by the Engineer-in-Charge.
S&F Non asbestos fiber cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 6 mm thick fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins /spring clips.
S&F 3 mm thick sheet glass, ordinary quality and glazing with glazing clips/oil putty in squares not exceeding 0.5 Sqm in each pane, all as specified.
Taking up or down 15 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
Taking up or down 20 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge.
S&F 15 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
S&F 20 mm bore tubes, 'medium grade', galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified.
M&L for Lagging to pipes 15 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete all as specified and directed by Engineer-in-Charge
M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete all as specified and directed by Engineer-in-Charge
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, complete all as specified & directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, complete all as specified & directed.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.
S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.
S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified.
M&L for PVC floor trap of 75 mm dia of outlet, plain with grating including jointing with solvent cement, including embedding with PCC 1:2:4 type B-1, complete all as specified & directed.
S&F 110mm bore PVC (SWR) bends any radius, complete all as specified & directed.
S&F 75mm bore PVC (SWR) bends any radius, complete all as specified & directed.
S&F 75mm bore PVC (SWR) vent cowl, complete all as specified & directed.
Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, 75 mm long PVC waste pipe, chain and plug and porcelain stopper, etc complete.
S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with quarter turn capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, brass chromium plated Jet shower with one meter long flexible pipe including all connection complete.
S&F in repair white plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or alumininium hinging device, complete all as specified & directed.
Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580 mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed..
S&F in repair PVC low level flushing cistern, valve less, Syphonic action type, double push bottom, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and making connection complete all as specified.
S&F in repairs white vitreous china urinal half stall type (excluding flushing cistern, flush pipe) including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement, ; fixing automatic flushing cistern with brackets, and waste pipe, complete all as specified.
S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60gms), complete all as specified.
S&F in repairs for 15 mm size bib taps, cast copper alloy chromium plated, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.
S&F in repairs for 15 mm size angle cock, cast copper alloy chromium plated, with capstone head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, complete all as specified & directed.
S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair 500 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete
Supply and fix in repair 1000 litres capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete
Dismantling of Plain or corrugated steel sheeting any gauge, thickness, from roof coverings including ridges, hips, valleys and flashings etc complete all as specified and as directed by Engineer-in-Charge.
S&F 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete.
All as per item No 72 but except Sheets using sheet retrieved vide item No 71 above
S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, all as specified and directed.
M&L for Preparation of new zinc (or galvanised) steel and iron roof surfaces of any description over 10 cm width or girth to receive painting, by coating with mordant solution including washing and cleaning, etc and applying two coat of synthetic enamel paint over one coat red oxide primer, colour and tint as ordered in camouflage pattern complete all as specified and directed by Engineer-in-Charge
Dismantling timber scantlings in unframed work 40 sqcm and over in section, in any position, all as specified
M&L for rolled mild steel section as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified.
S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe-410-W (Gde-E-250) quality A, complete all as specified .
M&L for PCC 1:4:8 type-D2 (using 40mm graded aggregate), as in foundations, filling and mass concrete, complete all as specified and.
Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified.
M&L for 75 mm thick PCC type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection laid in bays n. exc. 2 sqm each, finishing the surface of concrete topping even & fair, without using extra cement filling the joints with mastic filling comprising of one part of heated bitumen 85/25 or 95/10 grade and 3 parts of sand (all by weight) complete all as specified and as directed by Engineer-in-Charge.
M&L for 75 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base for path / flooring complete all as specified and as directed.
M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, spread rolled and consolidated to gradient as required.
Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 80 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hard standing complete
M&L for rubber molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hard standing, laid over screed bed complete all as specified and directed.
Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:2:4 type B-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness, set in CM 1:3 including making joints with or without grooves (thickness of joints except at curve shall not be more than 5 mm), including making drainage opening wherever required complete.
Dismantling RCC posts or struts of any section, including taking out embedded portion in concrete or brick work of any position place including swan neck fencing post and making good to disturbed portion all as specified.
Dismantling chain link fencing fixed with steel fillets & nut bolt etc, of any type complete all as specified
Excavating in post holes, in soft / loose soil, (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surfaces complete all as specified.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates), as in foundation, complete all as specified and directed .
Supply only chain link fencing 4 mm dia galvanized steel wire aperture of size as directed, made up into mattresses or cages lapped wired conforming to IS 2721 all as specified & directed. Note:- Fixing only fencing will be measured and paid separately.
Fixing only chain link fencing of description fixed to steel post with mild steel flat & nut bolt etc. Note: (i) Supply only fencing, will be measured and paid separately. (ii) Supply and fix mild steel nut bolt, line wire and flat will be measured and paid separately.
M&L for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, all as specified.
Supply and fix 8 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire including applying two coats aluminium paint over one coat red oxide primer after preparation of surfaces all as directed.
S&F mild steel screw bolts of dia 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, of length exc 5cm but n exc 10cm, complete all as specified.
S&F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rail staying bolts including securing or tying at crossing with and provision of galvanised mild steel wire staples or steel pins etc, as directed.
M/S MIR AND CO
M/S Abdul Ahad Rather
M/S M.A. Construction
M/S Thakur & Sons
M/S A.R.TANTARY
M/S GULAM AHMAD ABDUL SAMAD
M/s PARVAZ CONSTRUCTION COMPANY
M/S M.R. Construction
M/S GHULAM HASSAN AND SONS
M/S WANI AND SONS
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .