REPAIR TO SEWAGE LINES, CLEANING AND CLEARING OF BLOKAGES, REPAIR TO MANHOLES, COLLECTION CHAMBER AND ALLIED SEWAGE LINE AT INSIDE FORT WILLIAM AND REPAIR TO FLOORING, JOINERY, PLASTERING AND MISC B/R WORKS IN CERTAIN BLDGS OF ADV HQ EAC UNDER GE (FW

Amount

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches of 150 mm internal dia complete all as specified and as directed.

All as per Item No. 01 above, but for 100 mm bore cast iron/RCC pipes

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) 200 mm set in cement mortar complete all as specified and as directed.

All as per Item No. 03 above, but for demolition and breaking up drain pipes 150 mm bore drain pipes

All as per Item No. 03 above, but for demolition and breaking up drain pipes 300 mm bore drain pipes

All as per Item No. 03 above, but for demolition and breaking up drain pipes 450 mm bore drain pipes

S&F in repair Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.

-ditto- but 100 mm bore pipes fixed on walls

S&F in repair Cast iron (sand cast) soil, waste and vent pipes 150 mm bore of any length with or without ears with cement joints all as specified laid in trenches or in floors complete all as specified and directed.

-ditto- but 150 mm bore pipes fixed on walls

S&F in repair CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F in repair 100 mm bore cast iron (sand cast) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed.

S&F in repair CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches, for 100mm dia pipe complete all as specified and directed.

S&F Cast Iron Branch Piece 100mm bore (dia) single (equal or unequal), ordinary or inverted (spigot or socket type) with Parallel Branches fitted with Oval Access Door including Jointing with Cement Mortar 1:1, fixed complete all as specified and directed.

S&F 100mm bore cast iron cowls complete all as specified and directed.

S&F in repair CI bends for 150mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.

S&F in repair 75 mm OD PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair 110 mm OD PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius for 110 mm OD pipe complete all as specified and directed.

S&F in repairs, PVC (SWR) junction single (single T) equal or unequal, for 110 mm OD pipe complete all as specified and directed.

Supply and laying 450 mm bore reinforced concrete pipe of Class NP-2, laid and jointed with jute & cement mortar 1:2, complete with collars all specified and as directed.

All as per Item No. 21 above, but 300 mm bore RCC pipe

All as per Item No. 21 above, but 200 mm bore RCC pipe

All as per Item No. 21 above, but 150 mm bore RCC pipe

M&L concrete bed to drain pipe including packing under and haunching against the side of drain pipe after laid and tested in PCC 1:3:6 type C2 for 450 mm bore pipes complete all as specified and directed.

All as per Item No. 25 above, but PCC bed for 300 mm bore pipe

All as per Item No. 25 above, but PCC bed for 200 mm bore pipe

All as per Item No. 25 above, but PCC bed for 150 mm bore pipe

All as per Item No. 25 above, but PCC bed for 100 mm bore pipe

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for 100 mm bore pipe as required and as directed by the Engineer-in-Charge.

All as per Item No. 30 above, but for 150 mm bore pipe

All as per Item No. 30 above, but for 200 mm bore pipe

Excavation in trenches n exc 1.50 m wide and n exc 1.50m depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes etc not exc 10 Sqm on plan and not exc. 1.50 Metre in depth and getting out as in soft/loose Soil, complete all as Specified and as directed.

All as per Item No. 33 above, but in road/hardstanding etc and getting out

Removing excavated materials not exc 50 m and depositing where directed at a level not exc 1.50 m above the starting point complete all as Specified and as directed.

Returning filling in incl spreading , levelling , watering and well ramming in layers not exc 25 cm as in soft/ loose Soil, complete all as Specified and as directed.

Cutting of existing RCC hume pipe, any size and at any depth for construction of new manhole in existing line of size as per site requirement including repairing of edge of RCC hume pipe with cement mortar 1:1 and removal of cut portion of pipe from site complete all as specified and directed. (NOTE: Items for manhole & earthwork, excavation in hard surface/black top surface etc shall be measured and paid seperately)

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 1200 mm x 450 mm x 75 mm thick, of Capacity 5 MT fixed in proper position complete as directed by Engr-in -Charge.

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 900 mm x 450 mm x 75 mm thick, of Capacity 5 MT fixed in proper position complete as directed by Engr-in -Charge.

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 75 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.

S&F in repair RCPC (Reinforced Cement Polymer Concrete) grating slab of size 600 mm x 450 mm x 50 mm thick, of Capacity 3 MT fixed in proper position complete as directed by Engr-in -Charge.

Demolition Cement Concrete (un-reinforced) in Ground Floors and Paving not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.

M&L for providing Plain Cement Concrete (1:4:8) type D2 using 40mm graded stone aggregate as in sub base of floor, etc complete all as specified and directed.

M&L Cement Concrete type C2 (1:3:6) using 40mm graded crushed stone aggregate 75mm thick as in Plinth Protection, / sub bases etc. laid in alternate Bays, finished Concrete Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed.

Taking out of interlocking paver block, any shape or size and Re-laying the same after removing all vegetation, algae, grass etc, laid to proper slope & gradient over sand cushioning complete all as specified and directed. (NOTE: Sand, if required for correction of cushioning level will be measured and paid seperately. Replacement of broken paver block shall be paid seperately as "Supply only")

M&L Sand filling under floors under paver block, thickness not exc 40 mm including consolidation complete all as specified and as directed

Supply only machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS:15658-2006 of 60 mm thickness M-35 Grade with grey cement and pavement complete all as specified and as directed.

Supply and laying in repair 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; including taking out of existing paver block complete all as specified and directed. (NOTE: Cost of sand cushioning is deemed to be included in the quoted rates)

S&F in position, at or near ground level, factory made precast cement concrete kerb stone blocks, in M-25 grade cement concrete, fixed to the required line, level and curvature, jointed in cement mortar 1:3, including making joints with or without grooves (thickness of joints, except at sharp curves shall not be more than 5 mm) including making drainage opening wherever required complete all as specified and directed.

M&L for Cement Concrete type B-1, (1:2:4) using 20mm graded crushed stone aggregate in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed including use and waste formwork (straight or curved) complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc completed all as specified and directed.

Add or deduct from serial item No 49 here-in-before for each 25 mm girth or part thereof over or under 30 cm for forming fair finished drain or channel in cement concrete, using extra cement including forms, moulds, mitered /stopped ends etc complete all as specified and directed.

Taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove dust, debris/ rubbish, etc., complete all as specified and as directed.

M&L 15 mm thick rendering in cement mortar (1:6) to brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound as per manufacturer's instruction, surfaces finished even and smooth without using extra cement complete all as a specified and as directed. (NOTE: Water proofing compound shall be measured and paid seperately)

M&L for rendering 20mm thick built in cement mortar (1:4) in two layers (10mm thick each layer) on fair faces of brick work or concrete surfaces finished even & smooth (without using extra cement) and 2nd layer mixed with water proofing compound as per manufacturer's instruction for bldg height upto 4 storey complete all as specified and directed. (NOTE : Water proofing compound shall be measured and paid seperately).

M&L for rendering 5mm thick in cement mortar 1:3 to concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks (with Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

ditto item No. 60 above but except bricks complete all as specified and directed . (Note: Serviceable bricks obtained from demoition shall be reused)

M&L Brick Work with Sub-Class ‘B’ fly-ash Bricks Half-Brick thick, Old Size, built in Cement Mortar 1:4, Straight or Curved on Plan to any Radius, complete all as specified and as directed.

S & F in repair Cast iron work grade FG -150 unmachined in brackets, gratings, railing, frames, manhole covers and similar articles, weight exc 5 Kg each complete all as specified and as directed.

-ditto- but not exc 5 kg each

M&L in repair mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge.

Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.

S&F Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.11Sqm but n. exc 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed

S&F Non Skid joint free coloured tiles 7-8mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:6 complete all as a specified and as directed

S&F coloured glazed ceramic tiles in vertical surfaces 450 X 300 X 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

S&F coloured glazed ceramic tiles in vertical surfaces 300 X 200 X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Cleaning of existing covered / uncovered (partly / semi or fully filled up) drain, of any opening width and depth by removing and re-fixing of cover-slab (wherever applicable) taking out accumulated silt, mud, earth, rubbish, vegetation etc from the drain, washing of the drain with water and removing the same to a distance outside MOD complete all as directed by the Engineer-in-Charge.

Cleaning of sewage line/ storm water line of 450 mm bore by mechanically using trolley mounted water jetting machine including dewatering, de-silting and well flushing the line with water and tesing on comletion complete as directed by the Engineer- in- Charge.

All as per Item No. 72 above but for cleaning of 300 mm bore sewage line/storm water line

All as per Item No. 72 above but for cleaning of 200 mm bore sewage line/storm water line

All as per Item No. 72 above but for cleaning of 150 mm bore sewage line/storm water line

Cleaning of sewage line/ storm water line of 450 mm dia, manually (by pushing a piece of bamboo split, tied with gunny bags at one end from one manhole to another manhole) and well flushing the line with water and tesing on completion complete as directed by the Engineer- in- Charge. (NOTE: This item shall be executed only on urgent requirement)

All as per Item No. 76 above but for cleaning of 300 mm bore sewage line/storm water line

All as per Item No. 76 above but for cleaning of 200 mm bore sewage line/storm water line

All as per Item No. 76 above but for cleaning of 150 mm bore sewage line/storm water line

All as per Item No. 76 above but for cleaning of 100 mm bore sewage line/storm water line

Cleaning of blocked water closet (of any type/pattern) including connected CI pipe line (of any bore) upto 1st manhole and well flushing with water and testing on completion complete all as specified and directed.

Cleaning of blocked nahni/floor trap (of any size/type), sink/urinal/wash basin including connected pipelines, any type or bore upto gully trap/1st manhole and well flushing with water complete all as specified and as directed by the Engineer-in-Charge.

Cleaning of Manhole chamber of any size, upto depth 1.0 metre each, mechanically, removing muck/sludge/silt/mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge/debris out of MOD land complete all as specified and directed.

All as per Item No. 83 above, but for mechanical cleaning of manhole of depth exc 1.0 m but not exc 2.0 m

All as per Item No. 83 above, but for mechanical cleaning of manhole of depth exc 2.0 m but not exc 3.5 m

Cleaning of Manhole chamber of any size, of depth not exc 1.0 metrs but not exc 5.00 metre each, by pumping out deposited water, manually taking out accumulated sludge, silt, mud etc disposing off the sludge/debris out of MOD land complete all as specified and directed.

All as per Item No. 86 above, but for manual cleaning of manhole of depth exc 1.0 m but not exc 2.0 m

All as per Item No. 86 above, but for manual cleaning of manhole of depth exc 2.0 m but not exc 3.50 m

Taking up/down plants or vegetation growth wall upto roof level by means of cutting hole into brickwall and making good the surface of dismatled portion (not exc 150 sqm cm superficial area and not exc one brick depth) using brick bats/aggregate and plastering in cement mortar (1:4) to distributed portion and applying two coat of cement base paint to match existing surface up to fourth floor complete all as specified and directed.

Taking up old manhole cover with frame (heavy duty) and raising / refixing in proper position, set in cement mortar 1:3 and haunching with PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) concrete surround finished even and smooth without using extra cement all as directed by the Engineer-in-Charge.

Demolition of cement concrete (reinforced) of any description in any position not otherwise specially provided for complete all as specified and as directed..

M & L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) Set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including necessary forms, moulds, etc complete all as specified and as directed.

M&L for reinforced cement concrete (1:2:4) (nominal mix) type B1 using 20 mm graded aggregates in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for fair finished surfaces complete all as specified and directed.

S&F Mild steel TMT bars 6-8 mm dia , cut to length and bent to shape as reqd, including cranking , bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed .

S&F in repairs Vitreous china, white, half stall urinal flat back with grating and union for discharge pipe (excl flush pipe and flushing cistern) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, grating and Union for discharge pipe incl providing 32mm bore PVC discharge pipe complete all as specified and directed. (Make of Urinal : CERA, Model: CARYS / HINDWARE, Cat No: CORTO / PARRYWARE, Model: Aquaseal N )

S&F in repair vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including making good to floor, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. C0117 / HINDWARE, Cat No. 20004 / JAQUAR, Cat No. CNS-WHT-OP01 / CERA, Model: COVY)

S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )

S&F in repairs vitreous china (white) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)

S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed (Make: Essco, Cat No: ALE-773AL190X125 / ESS ESS, Cat No: C-231C / PRAYAG, cat No: BEA-26 / SOMANY, Model: ETHER)

Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 25 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface of lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed by Engr-in-Charge.

Deduct / Add for below / over 5mm or part thereof thickness for item No 101 above (Any storey/ height of building/ structure)

Material , labour and applying of high efficiency polymeric resin base film forming curing agent/compound over concrete surface and maximum coverage area 5.00 Sqm per litre as per manufacturers instruction (for any storey/ height of building/ structure) complete all as specified and as directed. (Make:- Concure LP90 of FOSROC or equivalent product in other makes specified in tender)

M&L for applying two component structural grade polymer modified reinstatement mortar of compressive strength, flexural strength shall not be less than 45 MPa at 28 days, 7 MPa at 28 days respectively (maximum coverage area 1.30 sqm per 25 kg pack @ 10mm thickness) over a coat of epoxy bonding agent on existing surface for strengthening of beams, columns and other structural element of average thickness 25 mm and mortar shall be applied in layer not exc 6 mm thick in layers and including surface preparation as per manufacturer's instructions complete all as specified and directed (any storey/height of building/structure). (Make- Rendroc S2 of FOSROC or equivalent product in other makes specified in tender)

Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for granite slab of 18 to 20mm thick, of approved quality (table rubbed and polished), machine cut, bedded and jointed with grey cement slurry and pointing with white cement with admixture of pigment to match the shade of granite stone as in steps, jambs, pillars, window cills, cooking platform and the like including grinding and polishing, laid over and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M& L for Vitrified Ceramic tiles, dark shade, double charged, 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes all as directed .

-ditto- but vitrified ceramic tiles in skirting, fixed over and including screed bed, 10mm thick in cement mortar 1:3 complete all as specified and directed.

M & L for heavy duty coloured ceramic floor tiles of size 300 x 300 x10mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete, laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (MAKE : JOHNSON, Model : Endura or equivalent item in other makes listed in the tender)

Repair to aluminium door/window including taking down replacement unserviceable hinging device, handles etc. making them in serviceable condition and refixing in same position complete all as specified and directed. (Note: Hydrualic door closer, floor spring and glass paid seprately.)

M&L Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members not exceeding 4 Kg per sqm, as in repairs, complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregates as in surface channels and drains including necessary form work complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed.

S&F 4.0 mm sheet glass ordinary quality in wooden frame with putty/beads in square n. exc 0.5 SQM in each pane complete all as specifed and directed

All as per item No. 114 above, but with 4 mm thick frosted glass

S&F 5 mm sheet glass ordinary quality in square exc 0.5 SQM in each pane complete all as specifed and directed

S&F in repair 15mm bore heavy duty PVC connector pipe of length 600mm with PTMT coupling at both ends, screwed down for pipe as directed. (MAKE : PRAYAG, Cat No. 324 / POLYTUF, Cat No. 4004-D / SHAKTI, Cat No: SB 1324-D)

Dismantling of ceiling board incl snap grid frame of any thickness including cover fillets complete all as specified and directed.

M&L False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/ sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in repairs, all as specified and as directed

S&F in repair PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cement and fixing at site on PVC frame as per manufacturer’s specification and instruction) complete all as specified and directed.

S&F in repairs PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall panelling inclusive of fixing as in grid / frame on wall at a distance 0.6m horizontal & vertical for wall lining/panelling as per specification of manufacturer and as directed by the Engineer-in-Charge.

S&F in repair aluminium composite panel in metallic colour of approved shade made out of 3 mm thick aluminium composite panel material comprising of 2.5 mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.25 mm thick) using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant etc complete all as specified and directed.

S&F in repair fibre glass reinforcement translucent corrugated sheeting of 2mm thick with two corrugation side lap fixed with fixed with L type or J type or cranked hook bolts in roofs, walls etc complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.

Taking down shutters of any description exc 1.00 sqm but n.exc 2.00 Sqm each all as directed.

S&F for 2nd class hardwood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed.

S&F 30mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.

S&F Factory made solid PVC door frame (chowkhat) of size 100 mm x 45mm made out of 5mm plain colour PVC sheet, frame reinforced with MS square tube of size 40mm x 20mm of 19 guage throughout the frame, fixed in opening as per specification & drg as per manufacturer instructions complete all as specified and directed.

S&F 100mm butt hinges stainless steel medium weight complete all as specified and directed

S&F aluminium handle, cast type anodised 150 mm size complete all as spcified and as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 2, universal type, aluminium (die cast) body, suitable for door shutters of 701 to 850 mm in width & weight between 36 to 60 kg. complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed.

S&F in repair 75 mm Mortice night latch with four levers (vertical type) brass body and fixed complete all as specified and directed.

S&F Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, overal length of cover plate 150 mm complete all as specified and directed.

Preparing new surface of wood or wood based material of any description and in any position not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer complete all as directed.

M&L for preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, treating ends of posts, back of chowkhats etc, with tar or coal tar black paint, area tarred exc 0.1 sqm but n. exc 0.5 sqm each complete all as specified and directed.

-ditto- but treating small articles such as holdfasts, ends of posts, back of chowkhats, etc, area n exc 0.1 sqm each

M&L for applying two coats of synthetic enamel paint over a coat of Red oxide, zinc chrome primer to new steel surfaces of any description over 10 cm width or girth including preparation of surfaces all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamal paint on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for applying one coat of synthetic enamal paint on old treated steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered of wall surfaces and applying two coats of acrylic distemper over a coat of alkali resistant primer applied over 1.5 mm thick wall putty complete all as specified and directed.

M&L Preparing new Surfaces of wall and applying Three coats of white wash complete all as specified and as directed.

M&L Preparing new Surfaces of ceilings and applying Three coats of white wash complete all as specified and as directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion weather proof paint over a coat of primer to new wall surfaces of any description, over 10cm width or girth not otherwise described, as per manufactuirer's isntructions, upto 4 storey height complete all as specified and as directed.

M&L for preparation of old decorated painted concrete, brick or plastered surfaces of any description over 10 CM girth/width not otherwise described and applying one coat of weather proof exterior emulsion complete all as specified & directed by Engr-in-Charge.

M&L for complete removal of existing treatment of wall surfaces and applying two coats of acrylic distemper over a coat of alkali resistant primer applied over 1.5 mm thick wall putty complete all as specified and directed.

M&L for preparation of old decorated wall surfaces and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for applying two coats of acrylic distemper to old decorated surfaces of ceiling including preparation surfaces complete all as specified and as directed.

S&F in repair mono block water pressure pump set of capacity 0.50 HP single phase, dischare range 36-60 Lpm, working voltage range 220-240 V with operating pressure range 1.4-2.4 (Bar) complete including with closed discharge valve and connected fitting, complete all as specified and directed.

Supply, hoisting and fixing rotational moulded polyethylene water storage tank (cylindrical vertical type with closed top) of capacity 1000 Litres, multi-layered (ISI marked), with GI tank nipple & cover, hoisted and fixed in position all as specified in SSR Part-I incl dismantling of existing unsv tank complete all as specified and directed.

S&F 20 mm bore Ball brass valves, high pressure, with HDPE float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. (MAKE : PRAYAG, Cat No. B-152 or equivalent model in JEXON / POLYTUF / SHAKTI)

S&F 15mm chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook, as in repairs, complete all as specified and directed. (MAKE : PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232Y / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002)

S&F Chromium Plated glass shelf of size 460mm x130mm fixed to wall with Chromium Plated screws as in repair, complete all as specified and as directed. (Make : Ess Ess, Cat No: AC-107 / PARRYWARE, Cat No: T6009A1 or equivalent model in PRAYAG / HINDWARE / CERA).

S&F in repair 15mm bore chromium plated two way bib cock with flange (premium quality), fancy type complete all as specified and as directed. (Make : CERA, Cat No: F1015161/ ESS ESS, Cat No: PT-03C / PRAYAG, Cat No: 9311-N/HINDWARE, CAT No: F360005/ PARRYWARE, Cat :T4634A1)

S&F in repair Chromium plated brass two way Angular stop cock, fancy type, concealed type with wall flange fixed to 15 mm bore of Iron pipe, complete all as specified and directed. (Make : PARRYWARE, Cat No: T4643A1 / CERA, Model : OCEAN / PRAYAG, Cat No: 9011 / ESS ESS, Cat No: PT-04B)

S&F in repair Chromium plated brass Angular stop cock concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: T4607A1/ CERA, Model: OCEAN / PRAYAG, Cat No: 9010 / ESS ESS PT-04A)

S&F PVC mirror cabinet(coloured) of size 622 x 422 x 100 to 125mm, fixed to wall including all accessories etc, as in repairs, complete all as per specified and directed. (MAKE: PRAYAG, Cat No: 555 or equivalent model in POLYTUF/ JEXON / SHAKTI / NILKAMAL )

S&F in repair Plastic seat & cover, white, soft close type, for coupled water closet (of any description) incl chromium plated hinge complete all as specified and directed. (Make : PARRYWARE, Cat No: E8300 or equivalent model in JAQUAR / CERA / HINDWARE)

S&F in repair Vitreous China, white, counter top wash hand basin of size 550 mm x 450mm including providing 32mm dia chromium plated waste fitting; making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (MAKE : PARRYWARE, Cat No. Cascade NXT/HINDWARE, Cat No. 10010 / JAQUAR, Cat No. CNS-WHT-801 / CERA, Cat No: S2040141 / SOMANY, Model: SIGNATURE)

S&F in repair vitreous china wall mounted coupled closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, PVC white soft close seat cover and connecting fittings complete all as specified and directed. (Make :CERA, Model : CLAIR / PARRYWARE, Model: CASCADE NXT / JAQUAR, Model: FLORENTINE / HINDWARE, Model: CONSTELLATION)

S&F in repair wall mounted vitreous china urinal, white with integrated sensor including all necessary fixing arrangements and connection complete fixed including taking down existing sensor complete all as specified and directed . (Make : ASIAN PAINTS, Model: URS-24-M / HINDWARE, cat No: 60021 / CERA, Cat No: S4010102)

S&F in repairs chromium plated brass jet spray with one metre PVC tube including taking existing jet spray complete all as specified and as directed . (Make : Essco, Cat No ALE-547/PRAYAG, Cat No: BEA-17 or equivalent model in SOMANY/ JAINKO)

S&F Chromium plated brass Pillar tap, as in repairs etc. complete all as specified and as directed. (Make : PARRYWARE, Cat No: T4601A1 /ESS ESS, Cat No. PT-01 / PRAYAG, Cat No: 8202 / HINDWARE, Cat No: F330001CP)

S&F powder coated steel peg stay having 5 nos, fixed to wall, as in repairs, complete all specified and directed.

S&F powder coated door cill 30mm wide 1M long including dust/insect arrestor, as in repairs, complete all specified and directed.

S&F in repair fancy type chromium plated 25 mm dia curtain rod with brackets and knobs, fixed to wall with all accesssories complete al as speciifed and directed. (NOTE: Quoted rate is deemed to be inclusive of the cost of brackets and knobs)

S&F in repairs tubes 15mm bore "medium grade" galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No. 172 here-in-before but 20 mm bore

Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.

M&L for brushing cement slurry @ 2.75 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .

M&L for Providing Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), as in roof padding, of thickness as required on site, finished even and fair complete all as directed by Engineer - in - charge .

M&L 10 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)

M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.10 litre per sqm over APP membrane.

GHOSH ENTERPRISE

MS AP CONSTRUTION AND CO

UNIVERSAL TRADING CENTRE

M A ENTERPRISES

B & R CONSTRUCTION

MS JYOTI INDUSTRIES

DEB AND COMPANY

PRABIR TRADERS