CERTAIN REPAIR TO DRAIN, PATH, HARDSTANDING AND OTHER MISC WORKS IN OTM AREA UNDER AGE B/R-I AT NAMS

Amount

M & L for brick work with sub class 'B' bricks in CM (1:6) straight or curved on plan exc 6 mtrs mean radius, including dismantling of old bricks and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) but except bricks complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete incl demolition of brickwork /stone built in cement mortar etc disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed. .

Description all as per above item no. 3.00 here-in –before but except brick.

M&L for plain cement concrete (1:3:6) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M & L for Flush pointing to brick walls in cement mortar 1:4 complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes or drain etc) and similar work including necessary form work and set in CM 1:6 incl demolition of old slab and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed. complete all as specified and directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required including cranking binding spirally for hooping for columns hooking end and binding with and including mild steel wire (anneled not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for 200mm bore dia RCC Class NP 2 pipes laid and jointed with collar Demolition and breaking up drain pipes (slat glazed stoneware, AC or RCC) set in cement mortar complete all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including forming packing under and hunching against the sides of pipe after they are laid and tested for 200mm bore of pipe and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for forming fair finished drain or channel 30Cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L PCC 1:3:6 type C2 (40 mm graded stone agg) as in surface channel and drains demolition of existing and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

S&F machine pressed coloured precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade over 25mm thick sand cushioning and joint filled with dry sand, incl dismantling of stone slab and tiles of any description of thickness in floors/aprons disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

All as per srl item -13- here in before but except paver block (Paver blocks obtained from demolition shall be reused after necessary cleaning and making good) all as specified.

M & L machine pressed coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry demolition of existing incl disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for machine pressed factory made PCC 1:2:4 type B-1 using 20mm graded stone agg. as in precast kerb stone incl rounded chamfered edge and set in CM 1:4 incl demolition of old PCC kerb stone of any description disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass concrete, Type D2 1:4:8 (using 40 mm graded stone aggregate) incl deomlition of old cement concrete in any description disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement demolition of existing and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'B' all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound of Grade B complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels, copings apex stone, pier caps, columns, posts, boundry pillars, bed plates, anchoage blocks, bonders (stone walling), corbles brackets etc with plain fair faces, including chamfers weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match all as specified.

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finishing the surface even and fair incl WPC as per user manual complete incl taking down old plaster on brick or stone walls, scrubing down with water etc & disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC., complete all as specified and directed. Note : (WPC shall be measuared seperatly and @ 200ML for 50kg cement bags or as per manufacturer's instructions).

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish even and fair incl WPC as per user manual complete all as specified and directed. (WPC shall be measuared seperatly and @ 3% by weight of cement or as per manufacturer's instructions).

M&L for 15mm thick cement plaster in CM (1:6) on fair faces of brick or concrete surfaces and finishing the surface even and smooth (without using extra cement) etc. complete all as spd and directed.

Supply only water proofing compound ISI marked complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing new plastered or un-plastered walls surfaces and applying three coats white wash complete all as specified and directed.

M&L for preparation for new concrete , brick curve stone , asbestos cement surfaces and applying two coats of synthetic enamel paint with over a coat of primer any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

M&L for preparation for old concrete ,brick curve stone, asbestos cement surfaces and applying two coats of synthetic enamel paint any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Supply & fix precast PCC square pole in repair of M-15 nominal Grade of size 150 mm x 150 mm at bottom & 100 mm x 100 mm at top of 2.25 m height with square base of size 45cm x45cm x15cm and at top pentagonal shaped PCC jali cover all around on square base of size 200 mm x 200 mm x 7.5 mm made as per shape complete all as specified and directed.

S&F mild steel work in tubular trusses including special shaped washer etc. complete using ERW induction butt welded tubes confriming to IS 1161-1779 grade St-240 incl dismantling old complete all as specified and directed.

Description all as per above item no. 32.00 here-in –before but except mild steel.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour profile AZ-150 having tensile strength of 550 Mpa with side lap as in roof covering/ cladding to wall, fixed with 'L 'or 'J' hooks / self tapping screws and incl dismantling of plain or corrugated steel sheeting in roof covering all as specified and directed by EIC.

Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour profile AZ-150 having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, vally gutter, drip complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M & L for providing pre cast cement concreate louvers and jallers 40mm thick set in cement motor 1:4 of type B-0, 1:2:4 (using 12.5mm graded stone aggregate) measured solid all mouiding but excluding frame incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M & L for providing pre cast cement concrete (RCC Jali pillars) size of piller 100x100x750mm incl dismantling and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

S&F 4mm thick acrylic sheet board of High quality with Media printing of 3m of best quality incl stainless steel studd (size of board, design of bd, type of print on sheet, size of studd not less than 35mm x 22mm dia, samples of letter, pictures, writing will be provided by accepting officer or Engr-in-Charge) and fixed at any height from GL complete all as specified and directed incl dismantling of existing damaged / rusted sheets. Note : Minimum weight of Acrylic Sheet not less than 4.70 kg per sqm. (Acrylic sheet make A Cast / Astari / Marka Cipta and stainless steel of grade A-ISI 304(1818) complete all as specified and directed. Stainess steel shall be measured and paid seprately.

Dismantling existing old vintage damaged and rusted / faded road sign boards complete all as directed.

S & F for HIP RATRO radium sheet / tape on stainless steel frame (size of board / samples of letter / pictures / writing will be provided by Engineer-in-charge and of best quality as approved by GE), incl dismantling existing old vintage damaged standing sign board complete all as specified and directed. Note-Composite panel sheet, Stainless steel pipes will be measured and paid separately.

S&F for 3mm thick Aluminium Composite pannel sheet best quality complete all as specified and directed.

M&L for glow sign board frame / standing sign board made out of stainless steel tubular / flat / angle as in any size ,dia and stainless steel of grade A-ISI 304(1818) complete all as specified and directed

S&F decorative stainless steel dome 65mm to 75mm dia complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2, using 20 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M & L for 18-20 mm thick machine cut kota stone slab laid over 15 mm thick screed bed of cm 1:6 as in flooring & riser and jointed with grey cement slurry mixed with pigment to match the shade, rubbing and polishing including demolition of existing and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for Granite 18-20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, wash basin platform, treads, risers and like laid in cement 15 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of existing and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match including demolition of existing and disposal of unserviceable material, debris and rubbish to a distance n exc 100m as directed by the EIC, complete all as specified and directed.

M/s Vijay Construction Co.

Santokh Singh and Associates

Chander Mohan Arora Contractor

BISHAN DASS

Roop Sons and Co

B.J.CONSTRUCTION CO

M/s AKG Engineers & Contractors

Jaspal Construction Co.