CA NO. CWE/KAS-20/2023-24 SPL REPAIR TO ROAD FROM CHARRING CROSSING, MIL FARM DAGSHAI TO FRESH ISSUE SHED UNDER

Amount

Material and labour for preparation of old black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the surface with mechanical means like air compressor to remove all loose dust/dirt complete all as specified and directed.

Applying evenly a priming with bituminous primer (VG-10) @ 5 kg per 10 Sqm with mechanical sprayer complete all as specified and as directed.

Material and labour Bituminous premix asphaltic semi dense concrete 40 mm consolidated thickness with 6% binder (VG-30) contents by weight of total mix, mixed in hot mix plant and laid with mechanical paver, rolled and compacted with power rollers to required camber and gradient complete all as specified and directed.

Note : - (i) Bituminous premix asphaltic concrete shall be laid using self propelled hydrastatic paver. (ii) Preparation of mix shall be using hot mix plant and transporting in tipper. (iii) Quality and Quantity of bitumen in semi dense asphaltic concrete shall be used as per approved design mix by GE. (iv) Rolling shall be done in three stages as per clause 5.6.2 of IRC 111:2009 using 9 to 10 tonnes dead weight or vibratory steel wheel roller, pneumatic rollar of 12 to 15 tonnes and finally 6 to 8 tonnes smooth wheel rollars. (v) Any variation in quality of bitumen in design mix shall be priced as specified in the particular specification. (vi) Unit rate quoted shall deemed to include the cost of design Mix.

Material and labour to potholes any depth, not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and will ramming (including supply of road metal) complete all as specified and directed.

Applying evenly a priming with bituminous primer (VG-10) @ 10 kg per 10 Sqm with mechanical sprayer complete all as specified and as directed.

Material and labour for Premix bituminous, macadam using 4% binder content using paving bitumen (VG-30) by wt of total mix using hot mix plant and laid with mechanical paver, rolled and compacted to required gradient and camber using vibromax power roller of capacity 8 to 12 Tonne complete all as specified and directed (consolidated thickness not exceeding 75 mm) complete all as specified and directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrastatic paver finisher. (ii) Preparation of mix shall be using hot mix plant and transporting in tipper.

Material and labour for Providing 2.5 mm thick road marking strip (reflective) of specified shade colour using hot thermoplastic material conforming to BS standards 3262 with 20% of glass beads (Intermixed) spread and laid by fully automatic thermoplastic paint applicator machine fitted with profile shoe, gum beds dispenser propane tank healers and profile shoe heater driven by skilled operator on road surface including cost of material labour, T&P, cleaning the road surface of all dirt scales oil greases and foreign material etc complete all as specified and directed.

Supply and fix in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS as per manufactures instructions of suitable size as approved by GE complete all as specified and as directed.

Supply and fix in repair Solar road studs of dimension (125 MM x 125 MM x 25mm ) shank 60mm of any coloured 100%water proof design according to IP 65 working temp 10 to 75 C high efficiency mono crystalline solar panel 2.4V /0.30 watt & rechargeable battery (1.2V/1600MA) six super bright LED with 10000 to 18000mcd (millcandela) complete all as specified & directed.

Supply and in repair metal tubular delinetor made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed

Rajesh Agencies