Special repair to RDH Hospital Shimla SH Repair work in RDH Hostel roofing at IGMC Shimla.

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within 20 metres lead.Slate roofing

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.within.all leads and lifts as per direction of Engineer-in- charge :

Providing and fixing on wall face PVC Type - B Finolex Spigot, Socket, Waste and Ventilating pipes of working pressure not less than 4.5 Kg/Sqm including Collar and filling the Joints with approved Adhesive complete including Carriage of Material with in all leads and lifts (i) 150 mm

Providing and fixing PVC Finolex Door Bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.(I) 150mm Nominal Dia

Providing and fixing PVC Finolex Plain Bend ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.(I) 150mm Nominal Dia

Providing and fixing PVC Finolex collar ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.(I) 150mm Nominal Dia

Providing and fixing PVC Finolex Tee ISI marked including fixing with approved adhesive etc. complete.including carriage of materials within all leads and lifts.(I) 150mm Nominal Dia

Providing and fixing prepainted galvanised iron profile sheets Tata Durashine or JSW (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.60 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 1518 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)