Bhojubeer sindhora marg se shri dharmveer telars ke samip se bhaithauli ausuchit jati basti hote hue pradhanmantri gram sadak tak pakke marg ka nirman karya

Earthwork in cutting or in embankment in ordinary soil excavation pits not exceeding 1/2 meter (20") in depth and earth work in enbankment to be in 20cm (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5") lift and 30m (100') lead. the earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I. S.I.No-253 I/C Mechanical Compaction in layer by Road Roller

Providing , laying spreading and compacting stone Agrigates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling ,with three wheel 80-100 kn static Rollar in stage of proper grade and camber , applying and brooming stone screening /binding material to fill up the interstices of coarse aggrigates ,watring and compacting to the required density Grading -3 as per Technical Sprcification clause 405

Providing and applying primer coat with bitumen emulsion (SS1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 --1.00 kg per sqm using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat withEmulsion (RS1) using distributor at the rate of 0.275 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm - to 11.2 mm size of aggregates Mix Ratio 2:1 either using penetration grade bitumen or Emulsion tothe required line, grade and level to serve as wearing course on the reviously prepared base,I/C mixing in a suitable plant laying and rolling with three smooth wheeled rollar 80-100 Tonne capacity and finishing to required level as per Tech. specification clause. 508

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510

Providing and laying of hot applied thermoplastic compound 2.5 mm thick with all proper complition of work same as per MORT&H spec 8.13.803 market rate DSR CODE 16.62

S/Fixing of infomatary M.S sign board Size (1.2x0.90) Made of 18 mm gauge M.S.Sheet fixed in ISA 40x40x5 mm frame supported in back side by 40x5 mm fiat iron on all four side along with two vertical pont of 2.15 mt from bottom of frame of angle iron ISA 40X40X5 mm with 150 mm long horizontal lag at bottom braded with 40x5 mm flat iron ellectrically welded and pointed with one coat red oxide primer S.S. NO. 503