Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.3 LAccepted-AOC 22 GURUDWARA BUILDING RAILWAY ROAD SRIGANGANAGAR RAJASTHAN 335001 | GANGANAGAR | RAJASTHAN | 335001 | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹37.0 L+₹3.7 L (11.1%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹44.4 L+₹11.1 L (33.2%)Rejected-Finance PLOT NO 19 PAOTA C 3RD ROAD JODHPUR 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Rejected | |
| 4 | Rejected-Technical | - | Rejected-Technical Documents not submitted as per NIT |
Tender Value
Refer Docs
EMD Value
₹75,000
Closing Date
4 Oct 2024, 6:00 pmClosed
Commanding Officer, 107 Engineer Regiment
107 Engineer Regiment, Gate No 2, Near MES water point, Khetolai, Pokhran, Rajasthan, Pin-345031
A Veh Maint Shed
2024_ARMY_668500_1
2109/AVMS/OPW
Open Tender
Civil Works
Works
60 days
Khetolai
As per tender documents
5 documents required · 5 mandatory
₹500
Commanding Officer, 107 Engineer Regiment
₹75,000
25 Nov 2024
7 Sept 2024
5 Oct 2024
7 Sept 2024
4 Oct 2024
7 Sept 2024
7 Sept 2024 - 11 Sept 2024
Amount
Material and labour for excavating in trenches, exc 1.5 m wide and exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge
Material and labour for Hardcore (Broken stone or boulders) of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge
Material and labour for PCC Type D2 (1:4:8) using 40 mm graded crushed stone aggregate as in foundation filing & mass concreting etc complete all as specified and directed by Engineer-in-Charge
Material and labour for PCC Type C2 (1:3:6) using 40 mm graded crushed stone aggregate as in post , foundation Bed etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 150 thick PCC Type C2 (1:3:6) using (using 40mm graded crushed stone aggregate)as in flooring complete all as specified and directed by Engineer-in-Charge
Material and labour for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in plinth protection (finished even and smooth without using extra cement) laid in panels including forming construction joints 10mm wide and 75mm deep at every 2m interval and joints filled with sealing compound grade 'A' complete all as specified and directed by Engr-in-Charge
M&L Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using of cement content not less than 450kg per cubic metre as per design mix, thickness of concrete not more than 25 cm or less complete including forming construction and dummy joints and priming & filling sealing compound Grade 'A' and brooming the concrete surface when the concrete is green complete all as specified and directed by Engr-in-Charge
Supply only Non circular synthetic fibre as secondary reinforcement of length 12 mm, specific gravity 1.31 to 1.41, UV stable and alkali resistant Make Fosroc, Fibrex, Sika, BASE
Supply only Metallic floor hardener. Make Stillonite hardonite
Material & Labour for Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with concrete finished even and smooth complete all as specified and directed by Engr-in-Charge
Material & Labour for Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with concrete finished even and smooth complete all as specified and directed by Engr-in-Charge
Material & Labour for Use and waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter with concrete finished even and smooth complete all as specified and directed by Engr-in-Charge
Material and labour for Reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm graded crushed stone aggregate as in Foundations, including footings, bases for columns, etc.; basement slabs and mass concrete complete all as specified and directed by Engr-in-Charge.
Material and labour for Reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20mm graded crushed stone aggregate in Walls, complete all as specified and directed by Engr-in-Charge.
Material and labour for Reinforced cement concrete (nominal mix) Type B1 1:2:4 using 20 mm graded crushed stone aggregate in Columns, complete all as specified and directed by Engr-in-Charge.
Material and labour for Steel reinforcement with Mild steel bars 16mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge
do but with 12 mm dia
.do but with 10 mm dia
do but with 8 mm dia as in stirrups
Material and labour for Pre-cast cement concrete block masonry Type B1 1:2:4 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 complete all as specified and directed.
Material and labour for 50 mm thick damp proof course In cement concrete 1:2:4, type B-0 using 12.50mm graded crushed stone aggregate mixed with water proofing compound @ 3% by weight of cement to horizontal or vertical surfaces including necessary formwork
Material and labour for Rendering 15mm thick in CM 1:4 on fai faces of brick/block masonry work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of plastered surfaces and applying two coats of cement base paint over a coat of primming coat complete all as specified and directed.
Supply and fixing Rolled mild steel sections Fe-410W Grade E-250 quality B ISMB 350 in columns, roof trusses etc including all distance peices, cleats stiffeners, gusset plates, forming holes etc complete all as specified and directed.
do complete as above but with ISMB 175
Supply and fixing Rolled mild steel sections Fe-410W Grade E-250 quality B Plates 12 mm thick (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes complete all as specified and directed.
Supply and fixing Rectangular Hollow Sec 80X40X4 mm in purlins, rafters; including connecting plates complete all as specified and directed.
Supply and fixing Rectangular Hollow Sec Hollow sq sec 40x40x3.6mm as in end supports for wall panelling complete all as specified and directed.
Supply and fixing MS Angle Iron 65x65x6mm as in framing including all necessary cleats, drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Supply and fixing MS flat 40x3mm as in wind tie including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
Material and labour for preparation of steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Supply and fixing 16 mm dia Foundation nut & bolt 750 mm long for columns complete all as specified and directed.
Supply and fix Mild steel screw bolts 16 mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm long
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, Colour coated 150 GSM of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturers instructions and all as specified & directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, colour coated 150 GSM as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm
M&L for Removing excavated material soils, n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and directed
M & L for preparing concrete surfaces of pavement and applying two coats of retro reflective paint over a coat of primer as per manufacturers instruction and all as specified and directed.
Supply and fix LED 40W electric LED Batten 1150mm with complete fixtures over PVC square box. Lumen Efficiency 100Lm/W(Make : Philips/Bajaj/Syska
Supply and fix Switch 5 Amps Modular type one way. (Make : Anchor / crabtree / Indoasian /Siemens / L&T/Havells Reo).
Supply and fix Switch with socket Modular type 16 Amps 6 Pin including modular box complete all as specified and directed. (Make : Anchor / crabtree / Indoasian/ Siemens / L&T/Havells Reo)
Supply and fix Switch with socket modular type 6 Amps 5 Pin modular box mounted. (Make : Anchor / crabtree / Indoasian/ Siemens / L&T/Havells Reo)
Supply and fix External type bulk head fitting with 12 watt LED light complete (Make-Bajaj/Philips/Oreva/Crompton and Greeves/Anchor)
S&F MCB DB Sheet Metal enclosure 8 Way (Make : L & T / C&G /Siemen/ Anchor)
S&F MCB SPN 40 Amps (Make : C& G/ Siemen/ Anchor/Havels)
S&F MCB SP 05 to 30 Amps ( Make : C&G/ Siemen/ Anchor/Havels)
S&F PVC gang Box with Modular PVC plate of suitable size as per ground requirement as approved by consignee (3 Way) (Make : Anchor / crabtree / Indoasian /Siemens / L&T/Havells Reo). To be provided of same make as for switch/ switch socket combination
S&F PVC gang Box with Modular PVC plate of suitable size as per ground requirement as approved by consignee (4 Way) (Make : Anchor / crabtree / Indoasian /Siemens / L&T/Havells Reo). To be provided of same make as for switch/ switch socket combination
S&F PVC Casing/ Capping 32 mm with accessories Nos each coupler, junction, Tee 3 way, 4 way on walls/ceiling complete all as specified and directed. ISI Mark (Make : Anchor/Modi/Havells/Eqvialent ISI Marked)
S&F Rigid PVC conduit pipe of 20 mm dia exclusive of boxes (junction/terminal) but inclusive of tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete fixed on wall, laid in floors all as specified and directed.
S&F PVC copper FRLS (flame retardant low smoke), Cable insulated, multi stranded 1.5 sqmm. Colour : Black, red & green. (Roll of 90m each) Complete all as specified and directed. (Make : prince, plaza, finolex ).
S&F PVC copper FRLS (flame retardant low smoke) cable insulated, multi standard 2.5 sqmm. Colour : Black & red (Make : Havells/ Finolex).
S&F PVC copper FRLS (flame retardant low smoke), Cable insulated, multi stranded 1.0 sqmm. Colour : Black, red & green. (Roll of 90m each) (Make : Havells/ Finolex).
S&F XLPE insulated 2 Core, armoured heavy duty electric cable sec area 20 sqmm with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq. mm. (Make : Havells/ Finolex).
Material, labour and testing for Chemical Earth Pit Complete Set including all, Length 3000 millimeter complete with strip and GI tube for protection all as specified and directed
Supply and fix Test point terminal block made of copper size 300mmx32mmx6mm, drilled and screwed including 4 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90x90x90mm made of 1.6mm plain sheet painted with two coats of synthetic enamel paint over a coat of red oxide primer and screwed to wall for protection of test point complete all as specified
Supply and fix Portable fire extinguisher 5 Kg ISI Mark in a frame mounted on wall. (Make : Cease Fire, Kanex, Usha, ABC, Safeguard)
Supply, erection and testing of “Integrated Solar Street Light (all-in-one – 30 W” with GI pole. Solar Street Light (LED based) consist of white LED luminaire ( LED + Driver) rating as per configuration along with Solar PV modules and LiFePo4 battery of given capacity, necessary control electronics, interconnecting wires / cables, module mounting structures, etc. to operate from dusk to dawn, with adjustable powder coated MS Clamp suitable for wall mounting alongwith pole. Protections: Short Circuit, Over load, reverse, polarity and battery protections. (Make: Photonics/JML/Orient/Surya) as specified in technical specification and directed by the Commanding Officer
Supply only Heavy Duty long span shelving racks of size 2.5m (Ht) x 1.80m x 0.60 m deep with 5 loading levels with 600 Kg UDL per level as specified in specification para 1 Part III and drawings S-11.(Make Godrej, Durian, Furmico, Wipro)
Supply only Oscillating BLDC Pedestal fan, Size 400mm without wheel base conforming to IS:1169 Latest. Brushless DC Motor. Display- LED Display showing speed, timer,Oscillation Mode. RPM 1350. Make Crompton, Usha, Havels, Khaita, Orient)
Habib Traders (BID ID -3117627)
New Vishvakarma Udhyog (BID ID -3128311)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .