Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.8 CrAccepted-Finance | L1 | Accepted-Finance Okay | |
| 2 | L2₹1.8 Cr+₹8.6 L (4.88%)Accepted-Finance | L2 | Accepted-Finance Okay | |
| 3 | L3₹2.1 Cr+₹37.2 L (21.2%)Accepted-Finance | L3 | Accepted-Finance Okay | |
| 4 | Rejected-Technical | - | Rejected-Technical Affidavit is not uploaded as per NIT. |
Tender Value
₹2.8 Cr
EMD Value
₹5.7 L
Closing Date
30 Sept 2026, 3:00 pmClosed
Executive Engineer, NBD (M-322), PWD, Delhi
Executive Engineer, NBD (M-322), PWD, Kashmere Gate, Delhi
AR and M/O residential buildings under sub division M3221, M3222 and M3223 at Gulabi Bagh and Sindhora Khurd during Sep 2026 to March 2027 (SH Change of Tenancy).
2026_PWD_298876_1
35/EE/NBD/PWD/2026-27
Open Tender
Civil Works
Works
240 days
Gulabi Bagh and Sindhora Kalan, Delhii
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹5.7 L
Yes
16 Oct 2026
23 Sept 2026
30 Sept 2026
23 Sept 2026
30 Sept 2026
23 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 7.29 | cum | 7,878.5 | ₹57,434.27 |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size). | 7.29 | cum | 6,518.6 | ₹47,520.59 |
| 3 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. | 553.5 | sqm | 749.3 | ₹4,14,737.55 |
| 4 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | 1,500 | sqm | 1,267.95 | ₹19,01,925 |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st lass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 208 | sqm | 2,172.1 | ₹4,51,796.8 |
| 6 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding | 3,150 | kg | 219.1 | ₹6,90,165 |
| 7 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm | 110 | each | 193.7 | ₹21,307 |
| 8 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : 250x10 mm | 320 | each | 83.9 | ₹26,848 |
| 9 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : 125 mm | 310 | each | 39.95 | ₹12,384.5 |
| 10 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 150x10 mm | 340 | each | 82.55 | ₹28,067 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.85 MB
BOQ_398691.xls
BOQ • 0.36 MB
NIT35SE.pdf
Tender Documents • 2.76 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .