Maintenance and Repair works to Thirumurugan nagar park Areas in Ward No. 6,East Zone.

Earth work excavation for foundation in hard stiff clay, stiff black cotton,hard red earth mixed with small size boulders SS.20B and sand,silt or other loose soil,wet sand, or silt not under water,light black cotton soil,sandy loam ordinary soil and tofull depth as may be directed expect in hardrock requiring blasting inclusive of shoring shuttering,and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed depositing the surplus excavated soil with in the compound in places shown by the departmental officers with intial lead and lifts and claening and levelling the site etc., complete.

Cement concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with standard specification.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cmX 60cm X and B.G10 stiffened with M.S angles of size 25mmX25mmX 3mm laid over silver Oak (C.W) joists of size10cmX6.5cm(space at about 90cm c/c) and supported dycasurina props of10 cmto13cm dia (space of 75cmC/C)complying with standard specification and directed- 10 m 2 (P & D)Data 38

Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm(83/4"x41/4"x23/4") includingcostofmaterialsand labour charges etc., as per standard specification - 1m3

Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.

Supplying, fabricating and placing in position RTS rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Plastering with cement mortar 1:5 (one cement and five sand by volume) 12mm thick for all internal/external surfaces like super structure, rainwater, ducts, elevation in all floors complying with standard specifications.

Painting with First Quality Emulsion paint two coat including cleaning, scrapping, removal of dust and necessary plaster of paris putty works wherever required etc., complete.

Painting two coats over New iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with best approved best quality of synthetic enamel paint of approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Wiring with 2x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A F.T. switchwith painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light point / Fan point

Wiring with 2x1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MS conduit pipeon wall and ceiling with M.S.accessories inflush with wall with 150mm x 100mmx 75mm MS switchbox with 3mm thick hylum sheet cover for 5A 3pin non interlocking CS plug with continuous earthwire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for concealed plug point.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and run of 4 x 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wirefor service connection mains

Supplying and fixing with Galvalume Colour Sheet of size 0.8 mm thick including necessary bolt, nuts and bitumen washed etc., completed - 10 m2

Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Lower end) with 2 module 100W fan step regulator (Lower end) with 1 metre down rod on the existing fan clamp

Supplying and fixing of ms angle Truss and Door including cost and all accessories etc.,complete.

Supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting .

Supplying and fixing of Materials

110 mm pvc pipe

110 mm pvc coupling

110 mm pvc elbow

63mm dia PVC Pipe 6kg/cm2

90mm dia PVC Pipe 6kg/cm2

90mm dia PVC Elbow

90mm dia Tee

32mm dia Dia PVC Pipe

32mm dia Dia PVC Elbow

25mm 10kg/cm2 Dia PVC Pipe

25 mm Dia PVC C.I Tap

25 mm Dia PVC Coupling

25 mm Dia PVC Elbow

25 mm Dia PVC Tee

25 mm Dia PVC End Cap

32 mm Gate Valve

Add :- GST @ 18%