Spl repair to Receipt and Dispatch Bay Bldg-P207, Improvement to Security Infra Ph II in Tech Area at 14 BRD. Improvement to OTM infra, Provn of Jaffery wall, Iron grill, Aluminium Partition at 14 BRD and 33 MCU under GE (AF) Borjhar.

Amount

Taking down carefully point wiring of any type/size (Light, fan, socket) complete including making good the disturb surface finishing of wall /floor etc. complete all as specified and directed.

Taking down existing sub main wiring of any type/size complete from wall and making good distrubed surface.

M&L for point wiring for light point with 1.5 Sqmm PVC FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC Casing & Caping of size not less than 25 x 12mm / 32 x 12mm suitable as per site reqmt, ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, screws, gutti / roul plugs PVC all as per site requirements including plastic terminal boxes for mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green

All as per Serial item No. 3.00 here-in-above but with socket outlet 5 Amps controlled by one switch on the same board.

All as per Serial item No. 3.00 here-in-above but with One socket outlet 5 Amps controlled by one switch on independent board.

All as per Serial item No. 3.00 here-in-above but with 4.0 Sqmm for one 15 Amps socket outlet on independent board and 4 sqmm PVC insulated multisranded copper conductor cable as continuous earth wire complete.

Supply and fixing Switch piano type one way 5 amps 230 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing Socket outlet 5 pin 5 Amps flush type complete all as specified and directed by Engr-in-Charge

Supply and fixing Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal 230 volts complete all as specified and directed by Engr-in-Charge

Supply and fixing ceiling rose surface bakelite 3 terminals all as specified and directed by Engr-in-Charge

Supply and fixing of surface mounted batten type LED luminaires 20W 230V, Ac on wall by stainless steel screw, rawl plug etc. & connecting upto ceiling rose with three core sheathed copper conductor cable of suitable size complete all as specified and directed

Supply of high efficacy recess mounted LED luminaires 36W, 240V AC, 2X2 tile in CRCA housing with full opal diffuser with flicker control technology to reduce harmful invisible flicker present in LED lighting sources, CCT 6500K, CRI ≥ 80, rated voltage 240V AC, power factor ≥0.95, IP 20, surge protection 2.5 KV, integral electronic driver with output short circuit protection and open circuit protection, surge voltage protection complete all as specified and directed. Make : Orient AQUA RECESS 2X2 FC - LTRAQ -36 -C -FC/ Philips/ Havells

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge. Make : Jaguar (LSRT0105070XC)/Orient(LSFS070C) Eqvt to Havells/Philips

Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 450 mm sweep heavy duty with copper winding complete including making hole in existing wall and finishing with cement ratio 1:4 of 15mm thick plaster work on brick surface/concrete surface/stone with louvers/flip cover of exhaust fan made with 0.5 mm thick sheet in square/roundall as specified and directed by Engr-in-Charge

M&L for Sub main wiring with two single core PVC insulated cable of size 2 X 4 Sqmm + 1 X 4 Sqmm earth wire multi stranded copper conductor drawn in heavy duty PVC incl PVC Casing Caping/conduit of size not less than 25 x 12mm / 32 x 12mm dia with all fittings and continuous earth wire complete concealed with wall and making good disturbed surfaces of wall/ floor etc. complete all as specified and directed by Engr-in-Charge

M&L for Sub main wiring with two single core PVC insulated cable of size 4 X 10 Sqmm + 1 X 10 Sqmm earth wire multi stranded copper conductor drawn in heavy duty PVC incl PVC Casing Caping/conduit of size not less than 25 x 12mm / 32 x 12mm dia with all fittings and continuous earth wire complete concealed with wall and making good disturbed surfaces of wall/ floor etc. complete all as specified and directed by Engr-in-Charge

S & F Single pole and neutral enclosure with a two pin and earth plug and socket 240V, 20A complete with one single pole MCB all as specified and directed by Engr-in-Charge

Supply and fix sheet metal enclosure MCB SPN distribution board, 8 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush in wall/surfaces complete.

Supply and fixing SPN 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing SP 6 to 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fix sheet metal enclosure MCB SPN distribution board, 4 way, Double door with IP-43 protection single phase 240 volts, including suitable size copper bus bar and neutral link fixed flush in wall/surfaces complete.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level, connected to galavanised iron earth lead by means of bolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 3 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 type C1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs, wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electrical plate no-4 of SSR part No1 all as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge.

M&L for Machine cut kota stone slab 20-25mm thick , in vertical surfaces, skirting over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) form wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads.

S & F in repairs 3mm thick sheet glass, figured glass, pin head type , glazing with oil putty area n exc 0.5sqm each pane complete all as specified and as directed by Engr in charge.

S&F Stainless stell wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples for complete all as specifed and directed.

M&L for old steel surfaces over 10 cm width or girth including preparation of old surfaces with one coats of synthetic enamelled paint complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified & directed.

Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc.

S&F 110 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge.

S & F PVC (SWR) junction single (single T) equal or unequal 110mm bore, with access door complete all as specified and directed by Engr-in-charge.

Excavating in trenches in soft/ loose soil, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for manhole, drain etc not ecx 10 sqm on plan and not exc 1.5m in depth and getting out complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed by Engineer-in Charge.

M&L for concrete bed to drain pipes for 110mm bore SGSW/PVC SWR drain pipe in cm 1:4:8 type D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes in foul smell condition complete all as specifed and as directed.

M&L for hardcore (broken stone or boulders) of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Demolition of brick work or stone/ boulder masonary built in CM including all quoins, arches, pillars etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge.

M&L for brickwork with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) surface channels and drains etc. complete all as specified and directed by Engr-in-charge.

M&L for Plain Cement concrete 1:3:6 type C-2, using 40mm graded stone aggregate as in surface channel, drain, saucer drain complete all as specifed and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise all as specified and directed

M&L for precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Type B1, 1:2:4 (20mm graded aggregate) set in CM 1:4 complete all as specified and directed by Engr-in-charge.

S&F Mild steel bars (TMT bars) 10 mm and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick/block surfaces of walls or concrete surface etc all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:6 to fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer as per manufactured instructions complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/ roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds, moss & efflorescent salts and applying two coats of Oil Bound Distemper over and including one coat of alkali resistant primer, complete all as specified and as directed by Engineer-in-charge. Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/ concrete surface. Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) during execution of work.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) all as specified and directed

M&L for 75mm thick cement concrete Type C-2 ,1:3:6,( Using 40mm graded aggregate) as in plinth protection , subbase complete all as specified and directed by Engr-in-charge.

Excavation in post hole in hard/ dense soil, each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out soft soil.

M&L for cement concrete 1:3:6 type C-2 (40mm aggregate) columns, pillar and posts etc. complete all as specified and directed by Engr in charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire etc.

Supply only for mild steel galvanised chain link fencing 3.15mm dia of mesh wire and mesh opeing size 100 x 100mm with straining bolts, 10 mm dia round bars binding with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc.), binding and jointing complete including necessary drilling, bolting or revetting etc. complete all as specified and as directed. Note : Flat iron, round bars, nut bolts and washers etc. shall be measured as supply only and paid separately.

Supply only MS flat iron, round or square bars confirming to Garde E-165 (Fe-290) for fixing chain link wire fencing complete all as specified and directed.

S&F mild steel work in angle iron in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. and similar works confirming to Grade E-165 (Fe 290) complete all as specified and directed.

Supply only mild steel round bars of 10 mm dia and over confirming to Grade E-165 (Fe-290) for fixing in chain link wire fencing complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed to both ends, each screwed end to be fitted with washers and one hexagonal or square not exc 5cm but not exc 10 cm long and dia of neck 5mm to 10mm complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) foundation, sub base of floors, filling mass etc. concrete complete all as specified and directed by Engr in charge.

M&L rendering 15mm thick on PCC block/brick masonary surfaces or concrete surfaces in CM 1:4 mixed and finished the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L for painting, two coats with synthetic enamel paint over a coat of red oxide primer on new steel/iron surfaces of any description over 10cm width or girth including preparation of surfaces and priming with red oxide complete all as specified and directed by Engr-in-charge. (90.00+64.00)

S&F galvanised 2 strand , steel barbed wire 2.24mm dia , barbed with 2mm dia barbs at 75 mm spacing and staining and fixing to any type of standards rails, staining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specifed and as directed. Note : Each line of horizontal/ vertical /diagonal wire to be measured for the purpose of payment.

M & L for preparation of new/ old undecorated plastered/ concrete surface of wall/ roof and applying of two coats of cement based paint over one coat of alkali resistant primer as specified and as directed by Engr-in-charge.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate ) as in coping, bed plates, pintle blocks, anchorage blocks foe hold fast etc. including necessary formwork whenever required complete all as specified and as directed.

M&L for RCC Type B 1 (1:2:4) 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc basement slabs, under reamed piles and mass concrete all as specified and directed.

M&L for RCC Type B 1 (1:2:4) 20 mm graded stone aggregate as in column, pillars, piers, posts ans struts all as specified and directed.

M&L for PCC Type B 2 (1:2:4) 40 mm graded stone aggregate as in column, pillars, piers, posts ans struts all as specified and directed.

M&L for TMT bars dia 8mm to 10mm dia and over cut to length , bent to shape required including cranking bending, hooping end hooking for columns stirrups etc and binding with MS wire annealed 0.90mm dia securing with clips all as specified and directed.

M&L for mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails braces etc complete drilled for fixing old steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel sheeting or other covering running rails and guides and hanging also fastening and fixing all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to battle and finished concrete flat all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions and finished rough surfaces of concrete flat all as specified and directed.

M&L for Finishing walls with Acrylic Smooth exterior paint of required shade (in camouflage pattern) : New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as directed by Engr-in-chrage.

Returning, filling in, soft/loose soil in layers not excceding 25cm thick, watering and well ramming complete all as specified and directed by Engr-in-charge.

Removal of surplus soil to a distance not excceding 50 mtr away & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Taking down PVC Chowkats or Frames not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames) complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and taking down old door shutter with frame complete all as specified & directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L non skid ceramic coloured tile 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed

M&L cement concrete 25mm thick 1:2:4, type B0 (using 12.5mm graded aggregate) as in in floor and sub-base complete all as specified

S&F Glazed ceramic coloured tiles in verticle surface of size 350x250x7 / 450mm thick including 12 mm thick rendering in CM (1:4) Over and jointed in neat cement slurry and pointed in white or coloured cement to match complete. All as specified and directed.

M&L for preparation of old plastered surfaces of walls and one coat of oil bound destemper OBD complete all as specified and directed by Engr-in-charge.

M&L for preparation of old plastered surfaces of ceiling and one coat of oil bound destemper OBD complete all as specified and directed by Engr-in-charge.

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal to store.

S&F for tubes, 'medium garde' galvanised, with all fitting and fixed complete to walls and ceillings or laid in floor for 15mm bore pipe complete all as specified and directed

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-charge.

Dismantling water tanks of 500 ltr capacity and removing to store

S & F 500 liters in repairs rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet and ball valve (float valve) complete as specified.

S&F in repair PVC connection 15 mm dia 450mm long with 2 Nos PVC check nuts with washer complete all as specified and directed.

S&F in rapair 15mm dia of fancy type chromium plated Angle stop valves, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for unions and fixed complete all as specified and directed.

S & F 15 mm dia bib tap cast copper alloy CP fancy type with capstan head long body and cup screwed down for iron pipe all complete all as specified and directed.

S & F in repairs viterous China Wash down water closet Pan 'Pedestal Pattern' white with seat cover white closet pattern with flat battom and cover mild steel chromium plated or aluminium anodised hinging device and joints etc and connection to drain, flushing, pipe, anti symphonage pipe and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concerete 1:2:4 type (B-0) complete all as directed .

S & F in 10 ltr capacity PVC low level flushing cistern, valveless, duel symphonic action type, white with inlet ball valve, float and handle including bracket and 32mm dia flush pipe of polyethylene of low or high density for low level cistern complete all as specified and directed.

S & F in Grating doom 125mm dia with waste hole of PTMT and CP complete all as specified & directed (Minimum weight 40 gm)

S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement/ adhesive and fixing at site on PVC/wooden frame as per specifications and drawing given in SSR. Note : PVC Fillets shall be measured and paid for separately.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specifications and drawing given in SSR and as directed.

S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 75 mm complete all as specified and directed.

S&F Aluminium handle, cast type anodized size of handle 100mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 100 mm complete all as specified and as directed.

M&L for Providing precast cement concrete louvres and jallies, set in CM 1:4 type B-0 1:2:4 (12.5mm aggregate) 25mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

Cutting openings, through brick walls build in cement mortar for door, window and other openings or enlarging existing openings, cutting for fixing holdfast for new shutter/door, converting window into door openings etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hardcore etc. to store and rubbish not exc. 50m

M&L for cement concrete type B0 1:2:4 (12.5mm graded aggregate) in fixing holfast , cills, steps; seismic and other similar bands, plinth courses, string courses, copings etc. complete all as specified and directed.

M&L for preparation of steel Surfaces of any description not exc 10cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed

S&F for mild steel in hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified

S&F for Collapsible steel gates, consisting of channel pickets, pivoted flat bars, top and bottom runners, handles etc. as specified, erected in position and securing runners with holdfasts and brackets, with MS Hot rolled medium channel of size 18x9x3mm and flats for crossings of size 18x5 mm,Tee and flats for top and bottom runners with a minimum web of 40x12mm and flange of 40x6mm and the distance from centre to centre of channel pickets is 10 cm complete all as specified.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F for Anodised aluminium Powder coated (thickness of powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F for Sheet glass 5.5mm thickness, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane as per instructions of manufacturers

S&F for 12mm thick Particle board for insulation purposes, fixed with screws to aluminium frame work complete all as specified and directed.

S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete, all as specified and directed.

S&F in repairs Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Mild Steel Butt hinges, heavy weight, cold rolled of size 100 mm complete all as specified and directed.

Ms N D Enterpise (BID ID -3249478)

M/s Torrent Inc (BID ID -3249651)

Anupam Das (BID ID -3250402)

S.P. TRADERS (BID ID -3251212)

R. D. ENTERPRISE (BID ID -3249649)

M/S Kiran Chandra Das (BID ID -3249557)

RIPAN BARUAH (BID ID -3250374)