Recarpetting of road from NH 105 to Dassomajra Bridge.(SH C/o Drain, P/L WBM grade 1,2 and 3, RCC Hume Pipe, Retaining wall, and P/L 40mm Bituminous Concrete over 50 MM Dense Bituminous Macadam).

Amount

Excavation in soil in Hilly Area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 m and a lead upto 20 m as per Technical Specification Clause 1603.1

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, back filling, concrete and masonary work in head walls and parapets clause 1108. 300 mm

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection work, back filling, concrete and masonary work in head walls and parapets clause 1108. 450 mm

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 1 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means. .

Providing and applying tack coat with Bitumen emulsion ( RS- 1 ) uasing emulsion distributor at the rate of 0.35 kg /sqm. on the prepaired bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying Dense Graded Bituminous Macadam laying with paver finisher equiped with electronic sensor laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions ofdensity, complete as per specificatons and directions of Engineer-in-Charge. with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity ( 16.54.1)

Providing and applying priming coat with Bitumen emulsion ( SS- 1 ) on prepaired surface of granular base including cleaning og road surface and spraying primer at the rate of 1.0 kg /sqm. using mechanical means as per Technical Specification Clause 502

Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average out put of 75 tonnes per hour using crushed aggregate of specified grading,premixed with bituminous binder @ 5.4 to 5.6 percent of mix and filler , transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and alingment , rolling with smooth wheeled vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause no. 509 complete in all respects.

Providing and laying Plain/reinforced cement concrete in open foundations complete as per drawings and technical specifications clauses 802,803,1202 &1203 P.C.C. 1:3:6 grade M -10. including cost of form work, centering, shuttering etc.

Providing and laying cement concrete 1:4:8 (1 cement :4sand :8 graded stone aggregate40 mm nominal size) and curing complete including cost of centering and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand 4 graded stone aggregate 20 mm nominal size) curing complete including cost of centring and shuttering in foundations and plinth complete.

Providing mild / tor steel reinforced cement for RCC. Work including bending binding and placing in position complete up to floor all level.

Providing and laying hot applied thermoplastic compound 2.5 mm thick including refectorising glass beads @ 250 gms sqmt. Area thickness of 2.5 mm is inclusive of surface applied glass beads as per I R C : 35. The finished surface to be level uniform and free from streaks and holes.

Providing and fixing Cat Eyes reflecting / glowing during the night hours on Road surfaces complete in all respect.

Sh. Bhupinder Singh Badi S/o Sh. Kishan Singh

KRISHAN LAL