REPAIR TO JOINERY, CUPBOARDS TO CERTAIN BUILDINGS AT MIRAN SAHIB UNDER GE JAMMU

Amount

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.00 Sqm each and removing from the site complete all as specified and as directed.

Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Supply and fixing pressed steel frames (factory made) made out of 1.25 mm thick black mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete size of frame 105 x 60mm including bottom of each chowkhat to be welded with 2 No's 25 x 25 x 3mm thick flat iron projecting 10 cm on either side complete all as specified and as directed.

Description all as per Ser item no. 4.00 here-in-before but size of frame 125 X 60mm for fixing of two shutters complete all as specified and as directed.

Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in, pressed steel chowkhats, bed block for holdfast and the like complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed.

Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.

Supply and fixing 35mm thick factory made wooden moulded panel door shutter with masonite facing on both side of (two, three or four panel design as approved) made of solid core using machine filled rigid expanded polyurethane foam. The door facing plate shall be 3.2mm thick complete all as specified and as directed.

Supply and fixing 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part - I), kiln seasoned complete all as specified and as directed.

Supply and fixing 35mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part - I, Section 8, clause 8.20 (a) complete all as specified and as directed.

Supply and fixing flush shutters, 30 mm thick solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing box type steel windows / ventilator (factory made) outer frame made out of ERW tube 'P' section 65X45X25 mm and shutter of ERW tube 'P' section 50mmX35mmX20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as directed. Notes: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanised mild steel wire cloth 0.56 mm nominal dia or wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Supply and fixing in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.0 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass, ordinary quality glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Description all as per Ser item no. 17.00 here-in-before but figured glass, pin head type complete all as specified and as directed.

Material and labour for pressed steel frames for cupboard chowkhat of size 60 x 40mm with one or more rebates including necessary fixing lugs, hold fasts etc complete all as specified and as directed.

Supply and fixing 100 mm size stainless steel hinges medium weight cold rolled complete all as specified and as directed.

Supply and fixing 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Supply and fixing in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Supply and fixing in repair 18/19 mm thick blockboard, grade 2 quality, interior grade, commercial type, fixed with screws to timber framework screws to timber frame work complete all as specified and as directed.

Supply and fixing 18/19 mm thick blockboard, grade 2 quality, interior grade, commercial type, fixed with screws to timber framework screws to timber frame work complete all as specified and as directed.

Supply and fixing 0.9 mm thick decorative laminates / sunmica type - 1 or surface finish, colour and pattern fixed with approved adhesive complete all as specified and as directed.

Supply and fixing 100 mm hasp and staple safety type aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and fixing stainless steel handle 100mm fixed to cupboard complete all as specified and as directed.

Material and labour for factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other frames / chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg / cum, screw withdrawal strength of 2200 N (face) and 1100 N (edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite / borer proof, water / moisture proof and fire retardant and fixed in position with mild steel hold fast / lugs / stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge all as specified and as directed. Note: - (a) Mild steel hold fast / lugs or stainless steel dash fasteners shall be paid for separately). (b) For WPC solid door / window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Supply and fixing 30mm wide flap (when open) stainless steel continuous (piano) hinges, bright finish or electrogalvanised fixed to kitchen cupboard complete all as specified and as directed.

Supply and fixing in repair 18 mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from co-extruded three layer rigid foam sheet (single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 Kg / cum and density of central core not less than 600 Kg / cum manufacturer by an ISO : 9001/2015 certified company complete all as specified and as directed.

Supply and fixing 18 mm thick factory made 100% solid WPC flush shutter (for cupboard and vanity etc) made from coextruded three layer rigid foam sheet (single extruded) with 0.8 to 1 mm thick outer layer having density not less than 1400 Kg / cum and density of central core not less than 600 Kg / cum manufacturer by an ISO : 9001/2015 certified company complete all as specified and as directed.

Supply and fixing modular auto concealed soft closed hinges 35mm, 110 degree size fixed to cupboard complete all as specified and as directed.

Supply and fixing magnet catcher 50 mm size for kitchen cupboard shutter complete all as specified and as directed.

Material and labour for preparing surface of new wood and wood based material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparing surface of new steel material of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint complete all as specified and directed.

Dismantling wrought iron or mild steel work as in cooler stand etc. complete all as specified and as directed.

Supply and fixing mild steel framed works such as grills, framed guard bars, etc and similar work as in cooler stands etc. conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

Re-securing or easying and adjusting without taking down and tightening hinges in position including adjustment of existing iron mongery for shutter exceeding 1.0 Sqm but not exceeding 2 Sqm each (iron mongery if used shall be paid under relevant item) and refixing in the same opening complete all as specified and as directed.

Taking down aluminium door shutter of any description, taking out double action floor spring machine, hydraulically regulated, cleaning, oiling, easing and adjusting to make fully functional and refixed in the position including refixing shutter complete all as specified and as directed. Note: - Store required if any shall be paid separately in relevant items.

Supply and fixing in repair aluminium door frame powder coated for door, windows, ventilators with one or more rebates including jointing cleat for fixing etc complete all as specified and as directed.

Supply and fixing in repair powder coated aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 No's 150mm size in each door, anodised aluminum snap beading screws, 3 No's aluminium hinges 150mm size B-21 type, 200mm long aluminium tower bolt, one number mortice lock 100mm size 2 lever (vertical type), 01 no door closer hydraulically regulated (die cast body), designation No. 3, universal type, suitable for door shutters etc complete all as specified and as directed.

Supply and fixing in repair powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Supply and fixing in repair powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fixing in repair powder coated aluminium anodised grill size of mesh 75x75x6mm fixed to window using U/Y channel of size 25x12mm and fixed with screws on aluminium section complete all as specified and as directed.

Supply and fixing 5.5mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane and fixed to ventilator complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

Supply and fixing in repairs double action floor spring hydraulically regulated, made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and including taking down aluminium door shutter and refixing complete all as specified and as directed.

Supply and fixing in repair factory made UPVC white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ 0.2mm), window profile with hollow section with multi chamber, frame (88mm x 52mm), sliding sash (42mm x 67mm), sliding mesh sash (42mm x 57mm) sliding interlock (one vertical length in each shutters) (45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18mm) 2 no's, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, hardware (Touch lock of zinc alloyed white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and including 5.5 mm thick plain sheet glass pane and required accessories complete all as specified and as directed.

Supply and fixing in repair powder coated aluminium three track sliding type glazed window, shutter with 5mm thick plain sheet glass fixed open track section 100 x 38 x 1.4 mm having three track (two of 5.50 mm thick glass and one of stainless steel wire cloth of 0.56 mm dia and 1.18 mm aperture) with members of window shutters of section 38x12mm including aluminium grill 75 mm x 5.50 mm thick pitch diamond shape, wire gauge and grill shall be fixed with the help of 40 mm aluminium flat and other standard bombay sliding section including all necessary fibre wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading etc complete all as specified and as directed.

Supply and fixing factory made single extruded WPC (Wood Polymer composite) solid door / window / ceosetory windows and other frames / chowkhat of size 65 x 100mm comprising of virgin PVC polymer of 'K' value 58-60 (suspension grade) calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index 12 for 100 grams) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) and 1100N (edge), minimum compressive strength of 58 N/mm², modules of elasticity 900N/mm² and resistance to spread of flame of class 'A' category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with mild steel hold fasts / lugs / stainless steel dash fasteners of required dia and length complete all as specified and as directed. Note: - Mild steel hold fasts / lugs / stainless dash fasteners shall be paid separately.

Supply and fixing factory made single extruded WPC (Wood Polymer composite) solid door/window/ceosetory windows and other frames / chowkhat of size 65 x 125mm comprising of virgin PVC polymer of 'K' value 58-60 (Suspension grade) Calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index 12 for 100 grams) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200N (face) and 1100N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900N/mm² and resistance to spread of flame of class 'A' category with property of being termite / borer proof water / moisture proof and fire retardant and fixed in position with mild steel hold fasts / lugs / stainless steel dash fasteners of required dia and length complete all as specified and as directed. Note: - Mild steel hold fasts / lugs / stainless dash fasteners shall be paid separately.

Material and labour for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm thick size comprising of virgin polymer of 'K' value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 grams) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) and 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class 'A' category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws complete all as specified and as directed. Note: - Stainless steel butt hinges and necessary stainless steel screws shall be paid separately.

Taking down cement plaster of any descrption on brick or stone wall or from concrete surface including taking out joint, hacking for key, scrubbing down with water etc and removing unserviceable material outside the cantt complete all as specified and as directed.

Material and labour for 10 mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for 15 mm thick rendering in two layer (10 mm in cement mortar (1:6) and 5 mm in cement mortar (1:4)) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement with WPC complete all as specified and as directed. Note: - Water proofing compound should be measured and paid separately.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparation of new surface and applying two coats of cement based paint over primer on new plastered surface complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coats of oil bound distemper any color on walls complete all as specified and as directed.

Material and labour for preparation of old plastered surfaces and applying two coats of cement based paint complete all as specified and as directed.

Supply and fixing extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

Supply and fixing extruded aluminium alloy handles fabricated type anodised 125 mm long complete all as specified and as directed.

Supply and fixing in repair extruded aluminium alloy handles fabricated type anodised 150 mm long complete all as specified and as directed.

Supply and fixing in repair extruded aluminium alloy handles fabricated type anodised 125 mm long complete all as specified and as directed.

Supply and fixing 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fixing in repair 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing in repair 200 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing 300 mm long dia aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing in repair 300 mm long dia aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified and directed.

Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

Supply and fixing mild steel helical door spring of size 300 mm at site including welding to steel chowkhats complete all as specified and directed.

Supply and fixing in repairs mild steel helical door spring of size 300 mm at site including welding to steel chowkhats complete all as specified and directed.

Supply and fixing 40 mm dia cupboard knobs fixed with nut and washer brass polished bright finished complete all as specified and directed.

Material and labour for applying two coats of DUCO spray paint by compression machine to WPC / iron surfaces over a coat of primer including preparation of surfaces using mechanical means / hot air guns complete all as specified and directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engineer-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

M/S VED PAUL MAHAJAN

PAKAYA BUILDERS AND DEVELOPERS PVT LTD

M/S Sukhmani Construction Co.