Construction of Vehicle Washing Bay Drain and HYDT Deep Boaring in Shastrinagar depo under JNAC Jamshedpur in East Singhbhum District

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I. Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B).

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : PCC - 1:1½:3 (1 cement :1½ coarse sand (zone-lll) :3 gradde stone aggregate 20 mm nominal size)

Providing designation 75 B brick work in C.M.(1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1:1½:3) (1 cement : 1½ coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. (a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

ProvidingCentering & Shuttering including Strutting, Propping etc& Removal of Form of Foundations, footings, bases of columns, etc. for mass concrete

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Supply 250 mm dia NP2 Hume Pipe with collors

Labour for Laying and fixing 250 mm dia NP2 Hume Pipe with collors

Loading and unloading of stone boulder/ stone aggregates/ sand/ kanker/ Earth/ moorum. (Placing tipper at loading point, loading with front end loader, dumping, turning for return trip, execluding time for haulage and return tip)

Earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : PCC - 1:3:6(1 cement :3coarse sand (zone-lll) :6 gradde stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated all complete job.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

ProvidingCentering & Shuttering including Strutting, Propping etc& Removal of Form of Foundatiuons, Footing all complete job.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fule, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete.(1) From 0-50 meter

Cost of drilling 200mm x 165mm x 175m deep bore well in all kinds of soil and rock in urban or any other area for installation of pump set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools drilling rig and Air Compressor and equipments, as well as fule, lubricants and cost of transportation of Rig machine and other vehicles up to the site including cost of flushing charges, Geological investigation etc. all complete. (2) From 51-120 meter onwards

Supplying all tools, tackles & Lowering of 200mm Nominal dia MSERW Casing pipe 6mm thick Confirming relevent for specification, cost of pipe etc. including all taxes, VAT, excise duty, freight charges with inspection charges etc. as applicable, all complete job.

supplying all material labour tools and equipment for fitting and fixing 200 mm dia MS CAP over casing pipe complete job

supplying, installing in to the 200 mm/165mm Nominal dia bore well & commissioning of suitable dia submersible Motor pump set pump capable to discharge 0.75 LPS against a total head up to 85 mtrs of kirlosker/Jyoti/ KSB make as per IS 1520/1980 coupled with 220 V, single phase, 50 Hz AC and wet type winded submersible motor, including cost of 32mm dia NR valve heavy type MS Clamps-2 Nos etc. as per requirement, all complete job as per direction of E/I with rope. Submersible Pump 150mm dia (with Bronze/SS impeller) up to 8 stages 2.0 HP. (Included CP)

Providing and supplying in standard lenghts High density polythene pipe confirming to IS4984/14151/12786/13488 (latest revision with necessary jointing materials like mechnical connector i.e thread/ insert joint /joint excluding GRADE PE80-PN10 32MM DIA

Supplying, installing & commissioning of panel board suitable for the motor pump set as mentioned in the item No.- 5, having voltmeter, ammeter, phase indicating lamps, Starters, main switch, fuses, inter connnection in the panel board including cost of wires etc. all complete job as per specification and direction E/I. IS 1239(Part-1990)

Cost of PVC insulated copper submersible cable (2.5 sq mm x 3 core) of Finolex or equivalent make including lowering and making water proof joints including all taxes and transportation to work site etc. as per specification and direction of E/I.

Supplying, & commissioning of 5 KVA Servo Stabilizer of Sen & pandit or pagaria or approved eqivalent make (Range 90 V -300 V) single phase with cable, change over switch for submersible pump etc. all complete as per specification and direction of E/I.

Supplying & commissioning and fitting 10 sqmm 4 core heavy duty aluminium conductor

Earthing with copper earth plate 600 X 600 X 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangment and wathing pipe etc. as required salt charcoal for GI or Copper plate earth electrode as required.

Providing 32mm dia GI elbow confirming IS specifiction including cost of all material labours jointing material all complete job

Supply and fixing G.I Reducing teeplain 32mm dia.

Supplying and laying 32mm G.I Pipes (TATA or equivalent) of approved make in trenches with red lead and yearn with socket and screw joints and cutting pipes in size and threading ends where necessary including carriage of materials upto work site etc. all complete as specification and direction of E/I

Cost of electrician and power wiring to the pump house including supplying material and labour etc. all complete job as per specification and direction of E/I.

carriage cost of Cement

carriage cost of Sand

carriage cost of Chips

carriage cost of Bricks

carriage cost of Steel

Sign Board and Photography

Goods & Service Tax (G.S.T.) -

Labour Cess -