WELCOME MAINT AND CERTAIN REPAIR RENEWAL WORKS TO MD OFFICERS ACCN MAP PH I AND II FZR CLUB OLD RATION STORE 101 MUDIKI LINE 102 MUDIKI LINE 75 JHOKE ROAD OFFICERS MESS AND OTHER GUEST ROOMS OF OFFICERS MESS UNDER AGE BR I OF GE WEST FEROZEPUR CANTT

Amount

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in plinth oprotection, 50 mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc.

M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade including laying of sand cushioning, etc, complete all as specified and as directed. Note :- Sand will be measured zand paid seperately

Supply only Sand

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash on walls including cornices.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of white wash to ceiling.

M & L for preparing of old decorated surfaces (plastered or un-plastered) by brooming down and applying one coat of Colour wash on walls including cornices.

M&L washing rubbing down and stopping of distempered and painted surfaces and applying one coat of oil bound distemper all as specified.

ditto all as per above item No:10 but on Ceiling

M&L Complete removal of existing treatment and preparing old/New decorated surfaces (Plastered or unplastered ) by brooming down or steel wire brushing scrapping down smoke soot,moulds moss and efflorescent salts and trading oil and greasy spots etc apply after finishing wall surface with birla wall care putty /JK wall care putty to get fair finish on that applying two coats of oil bound distempered over a coat of primer on plastered surfaces.

M&L for washing rubbing down and stopping of distempered and painted surfaces and applying Two coat of oil bound distemper all as specified.

M&L washing rubbing down and stopping of distempered and painted surfacesand applying one coat of cement based paint on wall surfaces including proper curing all as specified and directed.

M&L Complete Removal of existing treatment of walls applying two coats of cement based paint over one coat of cement primer on plastered surfaces all as specified and directed.

M&L Complete removal of existing treatment on wall / ceiling surfaces, including cornices, pilasters, etc, by scrapping down with wire brushes and removing existing loose finishes, paricles, apply after finishing wall surface with birla wall care putty /JK wall care putty to get fair finish on that two coats of acylic (100%) exterior emulsion paint over a coat of external cement primer complete all as specified and directed. Note:Necessary form work/scaffolding all are included in the above quotated rate. Make:Asian paints (Apex Ultima)/Berger paints (weather coat all guard)/Jenson & Nicholson (safe guard) Make:Birla Wall care putty and JK White Putty etc..

M&L for washing rubbing down and stopping of exteriror emulsion surfce and applying one coat of exterior weather proof acrylic paint t exterior grade including preparation of surfaces all as specified and directed

M & L preparing old painted wooden surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

M & L for Preparing old painted steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified.

Complete removal of existing treatment on terra cotta floor surfaces like a pathway pavers Chequered, inlerlocking tile, roof tiles surfaces etc including necessary preparation of surfaces and applying two coats of expoxy exterior emulsion paint over a coat of primer complete all as spd and directed by Engineer in Charge

M&L for applying two coats of synthetic enamel paint (Ordinary tint)over one coat of primer on new plastered surfaces including preparation of surfaces.

M&L for writing letters or figures (Block Roman Italic and Indian ) 15 cm High on wall surfaces, so that the stand out boldly and solidly without showing signs of brush marks all as specified. (Note :- The letters to bewrite with in the black synthetic enamel painted back ground, it is measured and paid to Seperately)

M&L for applying wall putty interior/exterior on wall surfaces finished smooth and even Complete all as specified and directed by Engineer in Charge

Supply only 38mmx3mm glass dividing strips as in floors complete all as specified.

M&L Cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in filling of steel chowkhats,bed blocks, coping etc including necessary form work complete all as specified.

Dismantling brick work built in cement mortar of any specification and in any position complete all as specified.

M&L Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

All as per item above but using old bricks retrieved from item no 26 demolition including cleaning and removal of mortar from old bricks.

M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.06 sq m but not exceeding 0.11Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m in floors set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match over a screed layer of 15 mm thick in CM 1:6 complete all as specified and as directed.

M & L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 sq m but not exceeding 0.18Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and backing with 10 mm thick in CM 1:4 complete all as specified and as directed.

S/F of Glazed coloured and cereamic tiles in vertical surfaces 300X200X7mm / 450X300X7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over backing coat 10mm thick in cement mortar 1:4 for laying skirting dados and vertical surfaces all as specified and directed

Chequered cement concrete coloured tiles 20 cm x 20 cm x 25 mm thick using grey cement and no pigment set over & including 20 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles complete all as specified and directed.

M & L Granite (of any type) tiles 16- 20mm thick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including grinding and polishing with 15mm thick screed in cement mortar (1:4) complete all as specified.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular)polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Light Shade)cement to match over 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

S&F Vitrified ceramic tiles 10mm thick (Square/rectangular) polished area of each tiles exc 0.36Sqm and not exceeding 0.42Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured (Dark Shade)cement to matchover 20 mm thick screed bed or bedding layer of cement mortar(1:6) for laying floor finishes.

M&L for light shade Vitrified tile 10mm thick polished, area of tile n exc.0.36 sqm as in Skirting set and jointed in cement slurry over and including 15mm thick screed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and directed.

All as per item No 40 herein before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down shutters of any description and refixing in the same opening exc 1 sqm and not exc 2 sqm each complete all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each

Ditto but exc 1 sq. m and n exc 2 sq. m each

Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

All as per item above here-in-before but size 125x60mm with double rebate.

All as per item above here-in-before but size 75x50mm with single rebate.

Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010).

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved.

S& F second class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good disturbed surfaces of wall complete all as specified and directed

S&F 30 mm thick,2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified.

S&F 35mm thick second class hard wood plain framed panelled shutters (any number of panels ), with panels of timber flat on both sides (feather edge), or of veneered particle board medium density wood wood particle board with commericial face veneers and fitted to chowkats.

S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed.

S&F 35mm thick second class hard wood glazed and skelton shutters,open rebated and prepared to receive glass gauze,etc (without sash bars),edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) fitted to chowkat.

Factory made box type steel window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified

Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames complete all as specified.

Demolition of boarding of any description and in any position complete all as specified.

S & F 14-16mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shelves with rebates fixed on PVC solid pattern of size 40mmx18mmx500mm on tree sides n complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE

S & F 16-18 mm Solid PVC board plain colour ,fixed with screws or adhesive with complete accessaries as in shutters complete all as spd and directed by Engineer in charge Make : Rajshree, Echon or equallent as approved by GE

25mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter including 6 mm thick teak wood leaping on three sides and 20mm thick on hanging side & French polishing to edging including fixed in repair complete all as specified and directed.

All as in item 62 here-in-before but 19 mm thick

S&F in repairs anodised aluminium door ,window , ventilator frame with side hung /including bombay sliding aluminium sections sliding window where required or pull and push type in frames and shutters with two track sliding aluminium frame and in partitions , make: Jindal (or) Equivalent make of approved size including necessary joining cleats, glazing clips, rubber packing anodised aluminium snap beading, screws etc complete all as specified as per manufacturers instructions. Note : Glass Pane and EPDM Rubber beading/gasket will be measured and paid seperately.

S&F EPDM Rubber beading around glass in aluminium windows /ventilator shutters.

S&F 200mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm long aluminium, anodised barrel tower bolts of extruded section, all as specified and as directed by the Engr-in-charge.

S&F 150mm Extruded aluminium alloy handle all as specified and as directed by the Engr-in-charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm length,with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F butt hinges 100mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B21 Specified and directed.

S&F butt hinges 75 mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type C 21 Specified and directed.

S&F butt hinges 125mm size exturded Alu. alloy with galvanised mild steel hinge pin anodised and fixed type B-21 all as Specified and directed.

S&F 150 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F 4 lever aluminium mortice lock,vertical type size 100 mm complete.

S&F hydraulically extruded aluminium body door closer regulated designation No 3 universal type suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg etc complete all as speciified and directed.

S&F I repaire 5.5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

S &F in repair to 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares n.exc 0.50 Sqm incl. incl hacking out old broken glass and putty/beading complete all as specified.

S &F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified as in repair.

S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws complete all as specified.

S&F Continuous (piano) hinges, mild steel bright finish or electro galvanised with flap (when open) 40 mm, fixed with steel screws complete all as specified.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

Material and labour rendering 10 mm thick cement plaster in CM 1:4 on other than fair faces of brick/concrete work surfaces compound finished even and smooth (without using extra cement ) all as as specified.

Material and labour rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick or concrete surfasces finished even and smooth (without using extra cement ) all as specified and directed.

M&L Rendering 10mm thick in cement mortar (1:3) on any face of brick walls or conrete surfaces, surfaces finished even and smooth without using extra cement, in ceiling, soffits of chajja or similar location etc complete all as specified & directred.

S&F galvanised steel water tubes 15 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 20 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

S&F galvanised steel water tubes 25 mm bore medium grade, with all fittings and fixed complete to walls and ceiling or laid in floors including taking down corroded GI pipe complete all as specified and as directed by Engr-in-Charge.

Taking up or down 15 mm existing steel tubing and connections and re fixing old steel tubing and connections in new or old position complete to walls and ceiling or laid in floors complete including cleaning the steel tubing all as specified and as directed.

All as per item No.89 here in before but 20mm dia.

All as per item No.89 here in before but 25mm dia or 32mm dia.

Cutting and Screwing for existing steel tubing of 15mm dia for alterations or additions complete all as specified and as directed.

Cutting and Screwing for existing steel tubing of 20mm dia for alterations or additions complete all as specified and as directed.

Cutting and Screwing for existing steel tubing of 25mm or 32mm dia for alterations or additions complete all as specified and as directed.

PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified.

S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified.

S&F 15mm bore stop valves CP of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup fixed in repairs complete all as specified.

S&F 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass as in repair complete all as specified.

S&F PVC connection both end brass union and length 450 mm long for 15 mm bore pipe.

S&F Bib tap of CP brass, 15mm bore, fancy type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. .

S&F 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe, as in repair complete all as specified.

S & F in repair to CP soap dish holder.Complete all as spd and directed by Engineer in Charge

S & F in repair to CP towel ring square.Complete all as spd and directed by Engineer in Charge

S & F in repair to CP toilet paper roll holder.Complete all as spd and directed by Engineer in Charge

S & F in repair to CP WHB mixer 15mm bore. With out popup waste system with 450mm long braided hoses Complete all as specified and directed by Engineer in Charge. Note:CQT-23167B(Make:Jaquar /Equivalent make)

S&F chromium plated fancy type15mm bore dia hot and cold mixer monolithic and head shower non telephonic type all as specified and directed.

S&F chromium plated fancy type15mm bore dia hot and cold wall mixer with provision forover head with 115mm long bend pipe one upper side connecting legs and wall flanges all as specified and directed. Note:-FLR 5219 N(Make:Jaquor/Equivalent))

S&F Health faucet (Jaquar model No: ALD-CHR-585)(ABS Body) with 8mm dia 1.00 m long easy flexible tube chormium coated finish and wall hook all as specified and directed by Engineer-in-Charge.

500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including fittings & dismantling existing water storage tank, complete all as specified.

S&F corner glass shelf 200(200x6) with ABS brakets complete all as specified and directed. Make prayag cat no BEA -48

M&F Glass shelves 45cm long, 125 mm wide, 6mm thick fixed on suitable support all as directed

Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified.

Vitreous china white wash down water closet (pedestal pattern) including PVC sheet cover, Jet and connection to drain or out going pipe and to flushing pipe anti-syphonage pipe etc, fixed as in repair, complete all as specified.

S & F Jet Pressure with chromium Plated flexible connection pipe, spreader and hock complete.Make : Oninda Cat part No -434/Jaguar/Onida. Complete all as specified and directed.

S&F 1.00 mm thick stainless steel sink, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mmx460mm, bowl size 410mmx330mmx160mm as in repair complete all as specified.

S&F 1.00mm thick stainless steel plate racks of size 750X600X250mm all as specified and directed.

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

Mild steel curtain rod PVC powder coated with fixing side brackets, end cups, rings @ 10 Nos per RM and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified.

S& F PVC end cups fancy type for curtain rod as in repaire complete all as specified

S&F PVC (SWR) 75 mm floor trap, plain with grating including jointing with solvent cement complete all as specified

Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes , complete all as specified.

S&F 110 mm bore PVC (SWR) bends with access door any radius fixed to walls including distance pieces and stack clamps complete all as specified.

S&F 110 mm bore PVC (SWR) branch piece,double (double Y) equal or unequal complete all as specified.

S&F 110 mm bore PVC (SWR) junction double, (double T), equal or unequal complete all as specified.

Dismantling CI pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified.

Cast iron floor trap for 75 mm bore pipe with cast iron grating including jointing to waste pipe in run lead as in repairs complete all as specified.

100mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.

75mm dia cast iron soil, waste and vent pipe, sand cast, in any length with or without ears with cement joints fixed to wall complete all as specified.

20mm bore PTMT ball valve high pressure with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified.

Dismantling plain or corrugated AC sheet/fibre sheet on roof covering complete all as specified and directed.

S & F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with J- type or L- type hook bolts complete all as specified and directed.

Pre painted galvalume aluminium Zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling of steel work including doors ,gates but excluding framed truss complete all as specified and directed by Engineer in Charge

Roof truss (framed) trussed, purlins crane gantries, rails and fastenings and heavy bracket framing (Beam tee, angle channel or flat sections) inclusing distance pieces,cleats etc Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Cutting chases pinning in making good to facings where required and pointing in CM(1:3) to for concealed water tubing or concealed conduit wiring etc.., and making good cutting not exc 10cm girth.

Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over red lead primed steel surfaces complete all as specified.

Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

Preparation of new plastered surfaces wall and applying two coats of Oil bound distember over a coat of primer complete all as specified.

White wash in three coats on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specifically provided

M&L 15 mm thick CM (1:4) as in horizontal and vertical surface of sunken floor portion and mix with SIKACIM (liquid integral water proofing admixture) of ratio 100 gm per cement bag(50 kg) add with 23 ltr of water and all as specified and directed.

M & L for applying evenly a tack coat of Industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm incl cleaning surfaces as specified & directed by the Engr-in-Charge.

M&L Cement concrete (1:2:4) type B-1 (20 mm graded stone aggregate) as in roof kerbs or mud stops, bed blocks, benching,copings etc including form work, weathering, slightly rounded or chamfered complete all as specified.

M&L Cement concrete type E-2 1:5:10 in 40 mm graded aggregate as in sunken floor filling

M&L 30 mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate mixed with water profing compound 3% of cement content as in flooring complete all as specified and as directed. Note: WPC measured and paid seperately

Dismantling of brick tiles single layer jointed & pointed in cement mortar including removal of grass vegitation including roots near out let of RWP and OHT staging area or specifically ordered by Engineer-in-Charge in writing complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for brushing neat cement slurry with 3 kg of cement per square metre

M&L 10 mm thick screed bed or bedding layer of mortar in CM(1:4) with water proofing compound @3% by weight of cement or as per manufacturer instructions will be on surface to have a smooth surface for laying of water proofing membrane. Note: WPC shall be measured and paid separately

M/L for 10mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 mixed with water profing comund @3% by weight of cement content as in verticle surfaces and finished even and smooth without using extra cement. Note: WPC measured and paid seperately.

Supply only water proofing compound.

Cutting out cracks to V-Section in existing roofs or terracing cleaning out, wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

Polythene film (transparent) 150 micron with 150mm end & side laps bonded with 80/100 bitumen and laid on roof, complete all as specified and directed.

Tack coat of industrial bitumen 85/25 @ 1.20 Kilogram per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces complete all as specified and directed.

M & L for 80mm thick average consolidated thickness mud phuska on flat roof ncluding 25mm thick mud plaster complete.

S & F 40 mm thick brick tiles laid on mud mortar and joints grouted flus in cement mortar(1:3) mixed with 5% of crude oil by wt of cement on mud phuska complete all as specified and directed.

All as item No 158 here in before but except tiles

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified.

S & F in repair to Hollow PVC wall lining consisting of 5mm thick single side prelam PVC sheet instead of plain colour sheet inclusive of solvent cement and fixing on PVC frame as per specified in MES schedule part-I & II complete all as specified and directed by Engineer in Charge .

S & F in rep of Gypsum Board 8 to 9 mm thick in ceiling fixed with screw 60x60cm placed in ceiling (Angle 25mm X 25mm , Main tee 38mmX23mm ,Sub tee 23mmX23mm) incl aluminium anodised/powder coated snap grid frame 605X605 mm for false ceiling incl hanging arrangement complete all as specified and directed by Engineer in Charge. Note:-The hanging stay wire shall not be less than 4.00mm thick all are included in the above mentioned item only.

Taking down carefully existig copper / aluminium point wiring for light / fan / bell / socket 5/15 Amp points complete with fitting and fixtures such as switches, sockets, ceiling roses, holders and bracket fittings with battens / conduits / wires and making good the disturbed surfaces of walls and roofs etc.and to match with existing colour complete all as specified and directed.

M &L Point wiring complete with 1100 volts grade PVC insulated unsheathed FRLS cable of copper conductor, multi stranded of size 1.5 sqmm, single core, in and including rigid non-metallic PVC conealed/surface conduit (as per site requirement), medium grade of suitable size (not less than 20mm dia) duly ISI marked with all accessories such as bends,reducers, spacers, saddles, junction boxes bakelite sheets, wooden rectangular boards / round blocks(for housing lamp holders and sketch fittings etc) and new MS pressed steel / cast iron sunken boxes of suitable size for mounting switches / bell pushes / sockets, fan regulator etc covered with new 3 mm thick laminated bakelite sheet top cover including continuous earth wire of size 1.5 sqmm unsheated stranded copper conductor with green PVC insulation connected to common earth dolly including cutting chasing of wall for concealed wiring and finish the surface with match to existing surface complete all as specified and directed for the followings :- Make : Havells/Polycab/Anchor/Finolex/Indo asian (a) One light point/fan point controlled by one single pole one way switch.

(b) One bell point controlled by one single pole bell push

(c) One socket outlet on the same board controlled by one single pole 5 Amp switch

(d) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per item No - 2 above but One 15 Amps socket outlet controlled by one 15 Amps suitable wiring with 4.00 Sqmm PVC insulated, unsheathed FRLS cable of multistranded copper conductor with continuous earth wire of size 2.5 Sqmm PVC insulated FRLS, unsheathed,multistranded copper conductor cable all as specified and directed. Make : Havells/Polycab/Anchor/Finolex

S & F Switch piano flush type 5 amps, one way duly ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Switch piano flush type 15 amps, one way ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Socket outlet 5 pin, 5 Amps, piano flush type duly ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Ceiling rose surface type, PVC/polycarbonate ,isolated, bakelite 65 x 50mm, 3 terminals ISI marked. Make : Anchor/Plaza//Havells/Legrand

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting including 10 W LED lamp complete all as specified. Make of holder : Anchor/Plaza//Havells/Legrand. Make of LED lamp : Crompton/Havells/Bajaj/Phillips

S & F stepped type electronic fan regulater flush type on the existing phenolic laminated sheet etc. as reqd. Make : Anchor/Plaza//Havells/Legrand

S & F bell push piano flush type 5 Amps single pole duly ISI marked . Make : Anchor/Plaza//Havells/Legrand

S & F bell AC 230 volts single pole complete all as specified and directed. Make : Anchor/Plaza//Havells/Legrand

S&F LED tube light fitting 1 X 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat Part No LCTL-18-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

Supply & Fix in repair sheet metal enclouser DB's 8 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series, 240 volts 200 Amps rated enameled bus bar 8 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB/Legrand

All as per Item No 17 above but SPN DB's 4 way. Make :Havells/Indo aisan/Standard/L&T/ ABB/Legrand

S & F in repair sheet metal enclouserDB's TPN 4 way double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series,and ACRYLIC window 415 volts 200 Amps rated enameled bus bar 4 way dust and vermin proof ssuitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB/Legrand

MCB TPN 415 volts 100 Amps, 10 KA breaking capacity complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB/Legrand

MCB single pole neutral(SPN) 240 volts, 20 to 60 Amps, 10 KA complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB/Legrand

MCB single pole(SP) 240 volts, 05 to 30 Amps, 10 KA complete all as specified. Make :Havells/Indo aisan/Standard/L&T/ABB/Legrand

S & F LED Security light fitting 1 X 30 watts with bracket (for housing security light fittings) made of GI pipe 25 mm dia light grade 0.6 mtr size duly cutted and welded at an angle of 120 degree and fixed to wall with suitable MS clamps - 02 Nos with 16 mm dia bolts,nuts,and washers complete all as specified and directed. Cat Part No LSTS-30-CDL Make - Cropmton or equivalent to Havells/Bajaj/Philips

Supply & Fix in repair sub main wiring of 6.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor with earth wire of 4.0 sqmm PVC insulated unsheathed FRLS cable multistranded copper conductor including PVC conduit pipe 25 sq mm dia all as specified and directed. Make : Havells/Polycab/Anchor/Finolex/Indo asia Note:-Two single core 6.0 sqmm cable and one single core 4.0 sqmm cable for earth wire and including conduit pipe 25 mm dia shall measured as one length).

S & F in repair Modular Switch one way 6 A, 1 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular Switch one way 16 A, 1 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular Socket,6A16A - 2/3 pin combined 2 module complete all asper specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular white cover plate with frame, 1 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular white cover plate with frame, 2 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular white cover plate with frame, 3 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular white cover plate with frame, 4 modulecomplete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular white cover plate with frame, 6 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular Bell push 6A, 1 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S & F in repair Modular step type regulator,120 W - 2 module complete all as per specified and directed. Make : Anchor/Plaza//Havells/Legrand

S&F in repair MS Box rectangular block for mounting normal/modular switches ,sockets,fan regulator etc with 3 mm thick plastic laminated sheet cover of following sizes. (a) 100mmx100mmx50mm

(b) 175mmx110x50mm

(c) 240mmx200mmx50mm

KAILASH CONSTRUCTION COMPANY

JAWAHAR CONSTRUCTION COMPANY

CHETAK CONSTRUCTION COMPANY

ABHISHEK AND COMPANY

M/s Manoj Construction Co.

HAPPY ELECTRICALS