ADDN/ALTN TO MD ACCN AT VARIOUS LOCATIONS AT NAGROTA MIL STN UNDER GE (P) NAGROTA

Amount

B/R Portion: - Taking down chowkats or frame with shutter n.exc 1.5 Sqm each (without taking of shutter from the frame) complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.

S&F pressed steel frame of size 125x60mm for door with two rebate incl necessary fixing lugs/hold fast 100mm long 06 Nos, appropriate hinges, lock strike plate including one shop coat of priming complete all as specified and directed.

S&F pressed steel frame of size 105 x 60 mm for door with one rebate incl necessary fixing lugs/hold fast 100mm long 06 Nos, appropriate hinges, lock strike plate including for one shop coat of priming complete all as specified and directed.

S&F factory made, HDF prelaminated moulded door shutter, 35mm thick (style with 2, 4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplied and fixed to frame at site complete all as per specification and Drg No CEUZ/TD/1343/2013, sheet No 1/1 complete all as specified and directed.

S&F factory made, single piece wire gauzed panel HDF door shutter 35mm thick (style) with 2, 4 or 6 raised panel design including GI wire gauge complete supplied & fitted in the frame at site complete as per specification and Drg No CEUZ/TD/1343/2013, Sheet No 1/1 complete all as specified and directed.

S&F box type steel window with side hung double shutter with provision for desert cooler/AC (inside for wiremesh & out side for glass) including guard bar, hinges, steel, handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing complete all as shown and specified on drawing No CEUZ/TD/1302/09 Sheet No 1/3 to 3/3 complete all as specified and directed. (Note : Wiremesh and sheet glass shall be measured and paid separately).

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all as specified and directed.

S&F Factory made solid PVC moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board Core, supplying & fixing in frame in site complete all as specified and directed.

S&F box type steel ventilators with top hung double shutter with frame (inside for wiremesh & outside for glass), incl guard bar, hinges, steel handle tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing, complete all as shown and specified on dragwing No CEUZ/TD/1302/09, Sheet No 1/3 to 3/3) complete all as specified and directed. (Note : Wiremesh and sheet glass shall be measured and paid separately).

S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in squares n.exc 0.5 Sqm each panes etc complete all as specified and directed.

S&F figured glass 4mm thick, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth .36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel staples etc complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 75mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts with sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed.

S&F 150mm long aluminium handles cast type, anodised and fitted complete all as specified and directed.

S&F 100mm long aluminium handles cast tpe, anodised and fitted complete all as specified and directed.

S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete all as specified and directed.

M&L 35mm thick flush shutters, solid core constuction with block board core and plywood face panels, commercial type on both side complete all as specified and directed.

S&F continuous (piano) hinges, width of flaps 30mm, mild steel, bright finish or electogalvanised complete all as specified and directed.

S&F stainless steel magnetic cubboard door catcher complete all as specifed and directed.

M&L two coats of synathetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10cm width or girth incl preparation of surfaces complete all as specified and directed.

M&L two coats of synthetic enamel paint on new steel surfaces, over 10cm width or girth complete all as specified and directed.

S&F mild steel drapery rod 25mm dia plastic coated fixed on wall including providing rings through out the length at intervals as directed complete all as specified and directed.

S&F mild steel brackets powder coated at both ends to hang curtain rod and colour complete all as specified and directed.

S&F PVC ball shaped knobs at both end of curtain rod and colour complete all as specified and directed.

S&F 125mm long Hasp and staple, safety type, brass with aluminium anodised hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down cement, plaster on brick or stone walls, etc including raking out joints, hacking for key, srubbing down with water etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick (10+5mm) on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement including WPC as per manufacturer instructions complete all as specified and directed.(WPC will be mixed in top layer and shall be measured and paid separately)

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer and 2mm thick wall care putty complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment on old surfaces of wall and applying two coats of cement base paint over a coat of primer after preparation of old surfaces complete all as specified and directed.

M&L for rendering 5mm thick in cm (1.:3) on ceilling finished even and smooth without using extra cement complete all as specified and directed.

M & L preparing new plastered surfaces of ceilling, chajjas facia etc. and applying three coat of white wash complete all as specified and directed.

M & L for complete removal of existing treatment on old surfaces of wall and applying two coats of oil bound distempering over a coat of primer and 2mm thick wall care putty after preparation of old surfaces complete all as specified and directed.

M & L for complete removal of existing treatment on ceiling and applying two coat of white wash complete all as specified and directed.

Demolition of unreinforced cement concrete on any desription and in any position (incl sunken floors) not other wise specially provided for and removing all demolished material/ debris exc 250m but n exc 500m. From the site and depositing where directed complete all as specified and directed.

M & L for 75 mm thick plinth protection PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate& finishing the surface even & fair W/o using extra cement complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound grade A complete all as specified and directed.

M & L for PCC 1:4:8 type D-2 using (40mm graded crushed stone aggregate) as in sunken floor filling or sub base and mass concrete complete all as specified and directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with Acrylic based polymer modified cementitous composite compound cating of make as approved in Technical Instruction 5/2003:- (i) First layer of slurry of cement @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.253 Kg/Sqm. This layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

Demolition Stone slabs and tiles of any description or any thickness in floors, aprons and staircase etc laid beded and pointed in any mortar complete all as specified and directed.

M&L glazed, coloured, ceramic, tiles of size (350x250x7mm/300x450x7mm thick), on vertical surfaces, such as skirting, dados, etc set and jointed in neat cement slurry and pointed in coloured cement to match with the surface over and including 10mm thick backing coat in CM 1:4 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.incl brushing neat cement slurry with 3.0kg of cement per sq. metre

S & F vitreous china squatting pan "Orissa pattern, size 580x440mm white , with white P or S trap integral foot rests(excluding flushing cistern and flush pipe) including provison of lean concrete bedding connection to drain out pipe, to flush pipe and antisyphonage pipe etc, complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

Supply and fixing 50mm dia low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ cm2 fixed complete to walls, ceilings or floors including elbows, unions, tees, reducing tees, adoptors, sokets, plug house clips etc and fixing to walls etc complete with saddles (snap clips), wall clips hooks complete all as specified and directed.

S&F wall mounted Stainless Steel soap dish holder (size 130x100mm) fixed to wall by plugs with chromium plated brass screws complete all as specified and directed.

S & F 15 mm bore Brass CP WHB mixer for mixing hot & cold water wall mounted with 190mm long swivel spout,connecting legs and wall flange for fixed to iron pipe for sink complete all as specified and directed.

S & F 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed for bath complete all as specified and directed.

S & F bib tap fancy type 15mm dia cast copper alloy chromium plated with capstan handle screwed down for iron pipe or for brass ferrule complete all as specified and directed.

S&F stop valve cast copper alloy 15mm dia fancy type chromium plated, with long shank and cup (concealed type) screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F angle cock/stop valve cast copper alloy 15mm dia fancy type chromium plated, with long shank and cup screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions complete all as specified and directed.

S & F swivel shower rose of PTMT 15mm bore (minimum weight 40 gms) including shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour (minimum weight 40 gms) fixing to pipe or union of 15mm bore complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage fixed on wall complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing MS angle iron (35x35x5mm) cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repairs sinks without drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washer and waste pipe; including bedding in cement mortar on to dwarf wall or including fixing MS angle iron (35x35x5mm) cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs Stainless steel plate rack wall mounted type with 5/6 partition of size 600mmx900mmx250mm made out of 1mm thick stainless steel sheet complete all as specified and directed.

S & F Magic eye of steel body with magic glass complete all as specified and directed.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140mm complete all as specified and directed.

Dismantling of water tanks and removing to store of capacity exc 250 ltr & not exc 500 ltr etc complete all as specified and directed.

S&F 500 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top triple layered white in colour) hoisted and fixed in position complete all as specified and directed.

S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and directed.

S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. complete all as specified and directed.

S&F stop valve cast copper alloy 20mm dia screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions and fixed complete all as specified and directed.

Demolition of old reinforced cement concrete concrete surfaces of any description over damaged surfaces irregular facia , chajjas and in smililar work of any description and in any position including shuttering,staging etc. complete all as specified and directed

M & L for Nominal mix RCC type B1 (1:2:4) using 20mm graded crushed stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajja and the like for four storeys high buildings complete all as specified and directed.

M & L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipsfor complete all as specified and directed.

M & L Udaypur geen stone 16 mm thick ( table rubbed and polished) as in cooking plateform of size as directed in length, incl cutting for sink over and including 20mm thick screed bed in CM (1:4) including roughing of existing surface and applying a coat of cement slurry @ 03 Kg / Sqm of surfaces and pointing with white cement 1:2 using marble dust admixture of pigment to match complete all as specified and directed.

Description as per serial item no 82 above but of size 550x75-100mm wide stone as on edges of cooking plate form complete all as specified and directed.

Dismantling of cast iron/reinforced concrete/PVC pipes including fittings taking out from trenches or walls as required dia of pipe upto 150mm complete all as specified and directed.

S&F 110mm dia PVC (SWR) Type - A pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S & F flat Iron 50x5mm hold fast/ clamps of mild steel stay for rain water pipes etc confirm to Fe-290 Gde E-165 complete all as specified and directed.

S & F Aluminium Hat and coat hooks, solid body, 175mm to 250 mm complete all as specified and directed

Dismantling brick tiles or terracing tiles single layer on roof including cleaning the roof surfaces and filling the cracks with silicon compound on roof complete all as specified and directed.

S&F Precast factory made plain cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors jointed and pointed with grey cement and pigment over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:4) complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) averaging 50mm thick as in roof padding finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including bitumen primer @ 3.50 Kg/Sqm over plastered surfaces of roof complete all as specified and directed.

M&L for 10 mm rendering in CM 1:4 mixed with liquid water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC to be measured and paid for separately

Supplied only liquid water proofing compound ISI Marked complete all as specified and directed.

M & L for laying APP (atatic polypropylene) modified membrance 3mm thick and weight not less than 3.00 Kgs per Sqm with 160 GSM/Sqm non woven polyester mat as centre core reinforcement laid with 75mm side over lap and 100mm end lap the membrane has to be laid with LPG torch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane and grouting with mixture of white cement and marble powder over roof complete all as specified and directed. (i) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polymeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units as per relevent IS.

Dismantling of ashlar facings,RCC jallies, dressed stonework, precast concrete articles and precast concrete block walling etc complete all as specified and directed.

M&L Providing precast cement concrete Type BO 1:2:4 (using 12.5mm graded crush stone aggregate) 25mm thick louvres and jallies and all mouldings including Pre cast frame for RCC jallies etc. set in cement mortar 1:4 complete all as specified and directed.

Dismantling of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

S&F Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

M&L Concrete bed Type D2 1:4:8 (40mm graded crushed stone aggregate) to 110mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested, complete all as specified and directed.

M&L Brick work with old size brick with sub-class `B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and directed.

M&L Cement concrete 1:3:6 Type C-0 (12.5 mm graded crushed stone aggregate) as in back filling of steel chowkhats, hold fast for doors,windows and ventilators including necessary form work, complete all as specified and directed.

Formwork rough finished surface to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on flat surface. complete all as specified and directed.

Formwork rough finished surfaces to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide. complete all as specified and directed.

S&F auto closing hinges 35mm of 0 degree crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed complete all as specified and directed.

S&F stainless steel handles 100mm size for kitchen cabinet shutters fixed complete all as specified and directed.

M&L 18mm thick HDHMR board both side laminated any clour fixed to wall as in kitchen, wardrobe etc. complete all as specified and directed

M&L 3 sq. cm cross sectional area of plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed

M&L two coats of synthetic enamel paint over a coat of pink primer on new wood or wood surfaces, not exceeding 10 cm width or girth incl preparation of surfaces.complete all as specified and directed

M&L Machine cut kota stone slab (single piece in treads) flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, cutting in square or rectangular and polishing over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Kota stone slab (single piece in riser) 15-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including rubbing, cutting in square or rectangular and polishing over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L Rounding to edges of stone slabs one edge, such as in st eps,cooking platform, and other similar situations complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and directed.

Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface Broken stone or boulders complete all as specified and directed.

M&L 100mm thick plain cement concrete type D- 2, 1:4:8 (40mm graded crushed stone aggregate) as in sub base complete all as specified and directed.

M&L 50mm thick sand cushion laying for interlocking tile over concrete floor complete all as specified and directed.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2021 of 80 mm thickness M-40 Grade With Grey cement and pigment complete all as specified and directed.

M&L providing cement concrete Type B1, 1:2:4 (20 mm graded crushed stone aggregate) in kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs ,parapet,railings and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork (straight or curved). complete all as specified and directed.

Removing excavated material/soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

S&F 50mm bore Cast iron cowls fixed with cement joint complete all as specified and directed.

S&F 50mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 50mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type ) or with parallel branches,reducer 100 to 50mm dia with access door complete all as specified and directed.

S&F 100mm cast iron sanitary connection socket to fit WC out-let fixed with lead joints complete all as specified and directed.

S&F 100mm bore cast Iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with access door complete all as specified and directed.

S&F 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 100mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm bore Cast iron floor trap, with grating including lead jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) including cast iron connector complete all as specified and directed.

S&F 100 mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified and directed.

S&F 75 mm bore cast iron bends (any radius) with duck's foot or heel rest complete all as specified and directed.

M&L Concrete bed Type D2 1:4:8 (40mm crushed stone graded aggregate) for 75mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in. complete all as specified and directed.

M&L Concrete bed Type D2 1:4:8 (40mm crushed stone graded aggregate) for 100mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in. complete all as specified and directed.

S&F 75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.

S&F 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type ) or with parallel branches,reducer with access door complete all as specified and directed.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in any type of soil complete all as specified and directed.

M&L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed.

M&L 150 mm bore reinforced concrete pipes, class NP3, laid and jointed complete with collars incl laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing complete all as specified

M&L cement concrete bed 1:4:8 Type D-2 for 150 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L Cutting into existing manholes for connecting new drains, making good to 150mm dia pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-I smooth finished and reforming benching as required complete all as specified and directed.

M&LProviding precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in coping etc. set in cement mortar 1:6 including necessary formwork all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in Man hole cover etc set in cement mortar 1:4. including necessary formwork all as specified and directed.

S&F Mild steel TMT Bars 6 to 8 mm dia cut to lengths, bent to shape required ,including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9 mm dia or securing wth clips complete all as specifed.

Providing cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate in manhole channel complete all aspecified and directed.

Extra for forming fair finished drain or channel 73 cm inner girth in cement concrete , using extra cement including forms, moulds, mittered/stoped ends etc complete all as specified and directed.

M&L PCC 1:3:6 type C 2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified.

M&L flush pointing to brick walls in CM 1:3 as in drain complete all as specified and directed.

M&L for cement concrete Type D-2 1:4:8 (20mm graded crushed stone aggregate) bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in 300mm bore pipe including necessary shuttering and support to concrete.

M&L Reinforced concrete pipes 300mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed

E/M Portion: Taking down carefully copper/aluminium point wiring (light, fan, bell, socket and power) complete including all switch sockets ceiling roses switch boards regulator, light fitting etc and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully ceiling/exhaust fan any sweep any size, removing blades & deposited to store, complete all as specified and directed. Note : Fans deposited will be BER & procured by GE Nagrota

Taking down existing energy meters, keeping aside safely & refixing the same in its original position after completion of point wiring/sub main wiring, complete all as specified and directed by Engr-in-Charge.

Taking down MCB DB of any size incl MCBs of any size/any make and disposal under schedule of credit and making good disturbed surfaces complete all as specified and directed

M&L for point wiring for one light point (T/L, Mirror Light, Bldg Sec Light etc) controlled by one switch 5 Amp SP one-way complete with 1.5 Sq mm (nominal area) PVC insulated, unsheathed and multi strand copper conductor FRLS cable (ISI marked) drawn into and including PVC concealed conduit (medium quality) and conduit fittings including 1.5 Sq mm PVC insulated unsheathed and multi stranded copper conductor FRLS cable as earth wire to common earth and connecting to earth dolly including suitable size of MS modular sunken box including base plate & cover plate for fixing modular switches, sockets, regulators with frame and top cover and machine made brass screw and washes etc complete all as specified and directed.

Description all as per serial item No 150 above but for one call bell point controlled by one bell push point complete all as specified and directed.

Description all as per serial item No 150 above but for one ceiling fan/exhaust fan point complete all as specified and directed.

Description all as per serial item No 150 above but for one 3 pin 5 amp socket on same board complete all as specified and directed.

Description all as per serial item No 150 above but for one 3 pin 5 amp socket on independent board complete all as specified and directed.

Description all as per serial item No 150 above but for with 2.5 Sqmm copper conductor for 15 amp socket with 2.5 Sqmm earth continuity conductor complete all as specified and directed.

Description all as per serial item No 150 above but for one light point controlled by two 2 way switches complete all as specified and directed.

S&F Modular snap switch SP two way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S&F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S&F Modular Bell push, SP 5/6 A suitable for 1 Module complete all as specified and directed.

S&F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S&F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S&F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

Supply and fixing decorative ultra slim square profile LED lighting fixture with extruded ploycarbonate, environmental friendly, energy efficient, LED lights fitting 1x20w, 220V, AC connecting up with three flexible conductor cable of suitable size from celing rose to fittings complete all as specified and directed.

S&F Modular blanking plates 1 module complete all as specified and directed.

S&F ceiling rose surface backalite two to three terminals complete all as specified and directed.

S&F Electric bell, AC, 230 volts single phase Ding Dong type complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate suitable for any type of fitting complete all as specified and directed.

Supply and fix LED lamp 9 Watt complete all as specified and directed.

Supply and fix LED batten 5 Watt cool white tube light with 500 Lumen for bathroom mirror fitting complete all as specified and directed.

Supply and fixing ceiling fan complete with blades, down rods and accessories, 230 V, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety vavle, thermostate, NRV, connection piece etc complete all as specified and directed.

Supply and fixing LED bldg security light fitting 25 watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant incuding thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, and frame and lourvers complete all as specified and directed by Engineer-in-Charge.

S/F sheet metal enclosure for DB's, MCB DB VTPN 4 way double door IP-43 complete all as specified and directed.

S/F sheet metal enclosure for DB's, MCB DB SPN 8 way double door complete all as specified and directed.

S&F MCCB 4 pole 100 amp 415 volt, 16 KA complete all as specified and directed.

Supply and fixing in replacement of MCB SP 240 volts 40 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of MCB SPN 240 Volts 32 Amps complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in replacement of MCB SP 240 Volts 5 Amps to 32 Amps complete all as specified and directed by Engineer-in-Charge.

S&F sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow, Tee junction, bend etc and provision of PVC insulated copper conductor single core 6 Sqmm for earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

M & L for Earthing complete with GI earth plate 60cmx60cmx3mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to GI earth wire lead 4mm dia by means of bolts, nuts, check nuts and washer of galvanised iron or steel all as shown in electrical plate No 5 of SSR Part-I connected to continuous earth wire on earthing joint all as specified and testing on completion including provision of GI earth lead wire protected by 15mm dia GI light grade protection pipe from test point to main boad and 20mm GI medium grade watering pipe funnel, PCC earth pit and RCC cover charcoal, salt and GI wire including excavation and earth work etc complete all as specified and directed

S&F Modular fan regulator 120 watt 2 module complete all as specified and directed.

M/S RATHER CONSTRUCTION CO (BID ID -3253059)

M/S MOHAN LAL SHARMA (BID ID -3253226)

MAMTA ENTERPRISES (BID ID -3253593)

M/s Khajuria Construction Co. (BID ID -3253701)

M/S VIRENDER SADHOTRA (BID ID -3254131)

bamral builder (BID ID -3253246)

JR CONSTRSTRUCTION CO. (BID ID -3254065)

M/s Sekinder Paul Sharma (BID ID -3254218)