Internal and External Electrification of SHIV KHORI SHRINE

Amount

Wiring for light point/fan point/exhaust fan point/call bell/point with 1.5sqmm FRLS PVC insulated copper conductor single core cable in surface /recessed medium class PVC conduit with modular switch,modular plate,suitable GI BOX and earthing the point with 1.5 sqmm FRLS PVC,insulated copper conductor single core cable etc.as required including cutting the wall and making the good same in case of recessed conduit as per site requirement

Group A

Group B

Wiring for circuit/submain wiring along with earth wire with following sizes of FRLS PVC insulated copper conductor ,single core cable in surface/recessed medium class PVC conduit as required.

2*2.5 sqmm+1*2.5 sqmm earth wire

2*4sqmm+1*4sqmm earth wire

2*10sqmm+1*06 sqmm earth wire

Supplying and fixing the following modular switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc.as required

5/6 amp switch

15/16 amp switch

3 pin 5/6 amp socket

6 pin 15/16 amp socket

Supplying and fixing TWO MODULE stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required

Supplying and fixing following size/modular GI box along with modular base and cover plate for modular switches in reces etc as required

3 Module

6 Module

12 Module

Supplying and fixing 3 pin ,5 amp ceiling rose on the existing junction box/wooden block including connection etc.as required

Supplying and fixing brass batten angle holder including connection etc.as required

Supply and fixing call bell/buzzer suitable for single phase 230v,complete as required

Numbering of ceiling fan/exhaust fan/concealed light fitting etc as required

Supplying and fixing of following ways surface/recess mounted vertical type 415 volt ,TPN MCB distribution board of sheet steel,dust protected duly powder painted inclusive of 200AMP tinned copper bus bar common neutral linl earth bar din bar for mounting MCBs(but without MCBs and incomer) as required 8 way (4+24),double door

Supplying and fixing 5 amp to 32 amp rating 240/414 volt,10 KA c curve miniature circuit breaker suitable for inductive load of following poles in the exisiting MCB DB complete with connection,testing and commission etc Single pole Havells,Anchor,L&T

Supplying and fixing following rating double pole/single pole and neutral 240 volt in the existing MCB DB complete with connections,testing and commissioningetc as required. Make Havells,Anchor,L&T

Earthing with copper earth plate of 600mm*600mm*3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/coke and salt as required

SITC of recessed/surface mounted circular/square type led based light,as per site requirement of 12 watt,240volt,5amp,50hz suitability syska,havells,bajaj

Sitc of 4 feet led 20 watt, based tube fitting syska,havells,bajaj

Sitc of 2 feet led 10 watt,based tube fitting syska,havells,bajaj

Sitc of 1200mm ceiling fan with suitability of 240 volt,50hz,5 amp make anchor,bajaj,usha

Sitc of IRON TYPE exhaust fan pf 450mm sweep (usha,bajaj,anchor)

Supply and fixing of 09 watt led based bulb syska,Philips,bajaj

Sitc of electric based geyser of 50 litre capacity ,240 volt,15amp single phase with 01 year warranty

Luminaries with control gear to be fitted on iron channel /mountain wall, inside /outside of holy cave to be fixed by drilling on channel/wall by using nut and bolt with other supporting iron clamps as required for fixing firmly Wattage :120 watt Type ; flood LED TYPE LED make ;nichie/cree equivalent Warranty :02 year Temperature :3k Type: warm light Lumens> 8400lm CRI >70 Lamp life >50000hr Colour /temperature :3000k Light :warm yellow colour Beam angle :45 degree Rated input voltage :240 volt Frequency :50hz Voltage withstand range:120VAC-300VAC IP:IP65. Electronic Driver :integral UV AND IR Radiation :NO with two year warranty. Make of luminaries Crompton,Philips,bajaj and equivalent

RGB COLOURED Luminaries with control gear to be fitted on iron channel /mountain wall, inside /outside of holy cave to be fixed by drilling on channel/wall by using nut and bolt with other supporting iron clamps as required for fixing firmly

Wattage :120 watt Type ; flood LED TYPE LED make ;nichie/cree equivalent Warranty :02 year Temperature :3k Type: warm light Lumens> 8400lm CRI >70 Lamp life >50000hr Colour /temperature :3000k Light :red green blue (RGB)colour Beam angle :45 degree Rated input voltage :240 volt Frequency :50hz Voltage withstand range:120VAC-300VAC IP:IP65 Electronic Driver :integral UV AND IR Radiation :NO with two year warranty. Make of luminaries Crompton,Philips,bajaj and equivalent

Cable for luminaries from luminaries to tapping point with insulating tape, 3 pole copper connector and 2module box pvc/IRON type : flexible 3 core 1.5 sqmm copper type with pvc sheathed (kei,havell,polycab)

Supplying and fixing single pole and neutral sheet steel MCB disdtribution board 240 volt on surface/recess complete with tinned copper bus bar neutral bus bar earth bar interconnection powder painted including earthing etc

06 way double door

08 way double door

16 way double door

Supply, Installation testing and commission of three phase DY11 ,11/0.433KV,100 KVA distribution transformer with bimetallic terminal connectors,03 numbers of 9KV lightening Arrester,01 set of 11KV G.O switch,01 set of 11KV DO fuse, 02 number of 09 meter long HT pole ,03 number of 11KV disc insulators complete with fitting,200 kgs of GI channel/angle/flat of sizes including clamps,08 kgs of galvanized nuts and bolts,03 number of pipe and rod earthing,20 kgs of GI strip for earthing of substation,03 number of 11KV pin insulators with pins,01 set of LT distribution Box with mounting clamps for 11KVA DTR with MCCB on three outgoing circuits,02 set of GT stay set(complete with stay wire clamps nuts and bolts,guy insulators and concreting) 06 number of wedge connectors/PG clamps,02numbers of anti climbing device with clamps,03 number of earthing set complete (earthing rod with GIwire for earthing of poles and fittings),01 number of meter box with resin cast ring type CTS for DT metring, 01 set of CT and PT along with 3 phase 4 wire trivector meter ,02 number of cement bottoming,02 litre of red oxide,02 litre of aluminium paint,01 set of sundry items like aluminium lugs,jumpers,binding tape,including cost of concrete bed with brick of ratio of 1:2:4 (cement:sand:aggregated stone)of size 5feet*4feet*5feet etcWarranty 02 year Cost includes head load, mechanical load and other miscellaneous charges Bharti ENGINEERS, ,continental,electricfield equivalent NABL approved

Supply and laying of 16 sqmm 4 core XLPE ,PVC sheathed aluminum armoured cable in suitable HDPE pipe in under ground /overhead as per site engineer ,including cost of digging trench and refilling of trench , fixing on mountain wall firmly by using clamps by drilling machine as per site requirement plus other miscellaneous charges (havell,ploycab,kei)

Providing and laying of 70 sqmm 3.5 core pvc sheathed xlpe armoured aluminium cable to be layed underground /overhead in suitable size of HDPE/DWC pipe in depth of 01 metre under ground including cost of digging and refilling of trench /pit for cable laying.

Providing and laying on overhead 50 sqmm ABC 3 CORE armoured cable along with 35 sqmm messanger

Design,fabrication,erection and commissioning of 12.5 mtrs,long octagonal High Mast system,hot dip galvanized with bottam dia 360mm top dia 150mm,thickness not less than 5mm completre with all accessories.Mast shaft shall be inh single section,hot dip galvanized and suitable for wind velocity as per IS;875 Part 3 along with the following for each High Mast as per specification enclosed

Head frame: 2 way Winch with gear ratio of 50:1 bobin set (6mmdia) chain ,sporocket and handle :750kg Wire rope of 6mm dia :53 mtr Lighting arrestor:.8 mtr long Winch and motor mounting bracket :01 set Thimble(06 mm dia rope) and D Clamp(for 06mm dia rope):08 set Number of section :02 Material of construction:S Grade as per BSEN10025 Plate thickness:3mm Cross section of MAST: 16 side polygon Standard for galvanization :as per BSEN ISO 1461 Size of opening and door at base:600x250mm Diameter of base plate:560mm Lightning protection finial:GI Single spike of lengthy 800mm Maximum wind speed :50m/s as per IS 875 PART III Number of foundation bolts :06 nos PCD Of foundation bolts:460mm Type /dia/lenghth of foundation bolts: TS/24MM DIA/850mm long Welding ;double longitudinal weld

LUMINARIES CARRIAGE Material of construction ;40NB ERW class B MS pipe Diameter of carriage ring(mm) : 710mm (ID) Construction :08 arm ,welded ,2 section Load carrying capacity :08/16 luminarie

TRAILING CABLE Conductor :copper 04 core 2.5 sqmm WINCH/POWER TOOL Type/SWL of winch :double drum.SWL 750KG Method of operation :01 HP,3 PHASE NO OF POLE/SPEED: 06/SINGLE SPEED STAINLESS STEEL WIRE ROPE Grade/construction :AISI 304,7/19 Construction Number of ropes: two continuos Diameter (mm) :06mm Breaking load capacity :2350 kg

Luminaries with control gear Wattage :180/200 watt Type ; flood LED TYPE LED make ;nichie/cree equivalent Number of luminaries and control gear of 180/200 wattage per high mast :06 Warranty :02 year Temperature :3k Type: warm light Lumens> 8400lm CRI >70 Lamp life >50000hr Colour /temperature :3000k Light :warm yellow colour Beam angle :45 degree Rated input voltage :240 volt Frequency :50hz Voltage withstand range:120VAC-300VAC IP:IP65 Electronic Driver :integral UV AND IR Radiation :NO Make of luminaries Crompton,Philips,bajaj and equivalent

Foundation and aviation light. Providing and laying in position 1:2:4 reinforced cement concrete foundation of size 01 mtr (L) X 01 mtr wide and 02 mtr deep I/c excavation of earth, providing, cutting, reinforcement of cold twisted bars of 12 mm dia-2100mm long (approx) -10 Nos. and reinforcement ring of cold twisted bar of 8mm dia-4100mm (approx) -13nos. (with 150mm spacing) as required with positioning of foundation bolts (as per item above) as shown in the item above and providing 90mm (O.D.) DWC, HDPE pipe for cable entry & exit as required. Supplying and fixing 06 Nos. 25mm dia x 750mm long GI foundation bolt (EN8 grade) with nuts , washer including 02 Nos. template of 04mm thick size 540mm x540mm with 06 Nos. 28mm dia holes, to match with Octagonal High Mast Base plate as regd. (each High Mast) ,Aviation obstruction lighting system complete -01 set (Each High Mast)

Panel with 3 kva servo transformer Supply, erection and commissioning of 4 way LT control panel in IP54 construction along with 01 NO of 3kva servo transformer with inpit voltage of 90 to 260 volt and gives constant voltage of 233 output , 01 No., of time switch and 01 No. of 32A 4 pole, 15 KA MCCB and 01 No. of 32A 3 pole modular contractor with all accessories-02 sets.,as desired by site engineer High powered non-=reversible power tool complete with all accessories-01 set (Each High Mast)

EARTHING Chemical earthing with 2 mtr rod of electrolyte and 25kg of earthing chemical of approved form

Cable for luminaries from panel: flexible 3 core 2.5 sqmm copper type with pvc sheathed armoured cabel (kei,havell,polycab) cost include supply,installation testing .commission ,head load ,mechanical load and other miscellaneous charges at site Complete job with two year warranty. Make of high mast; bajaj/Crompton/oswal/ equivalent firm

Repair of ornamental modulated cast iron pole 3 mtr by high duly painting with anti coarsine enamel paint 02 coats , providing and fixing of 45 watt led light by replacing faulty lights and also fixing 10 amp MCB

Supply and laying of GI 1.5 inch Dia at Road crossing

RATTAN CHAND GOVT CONTRACTOR

AJAY CONSTRUCTION

TUSHAR JANDIAL GOVT CONTARCTOR

A G ELECTRICALS

RAVISUN ELECTRICALS

Abdul Hamid and Sons