Work of Supply, Erection, Testing and Commissioning 11KV 3 Core, XLPE armoured Cable of size 300 Sq. mm. for conversion of existing OH 11KV Siolim Feeder emanating from 33/11KV Mapusa SS to underground system under SD-III, Agarwada, Div XVII Mapusa

Amount

Cost of Material

Supply, laying, Testing and Comissioning of 11KV , 3 core 300 sq.mm. A2XFY Al. armoured XLPE cable through conventional open trenching method in any type of soil including hard laterite.

Supply, Erection, Testing & commissioning of 3 core, 95 sq.mm Aluminium, XLPE insulated armoured, 11KV (earthed neutral) Cable for connecting to the distribution transformer centres and 11 KV HT installations and any other equipments. (from RMU to Transformer / HT Consumers)

Supply, erection, testing & commissioning of 11KV,630amps,out door,SF6 Ring Main Unit with two load break Switch and one Circuit breaker confirming to international standard and complete with fault passage indicator other accessories.

Supply, erection, testing & commissioning of 11KV,630amps,out door,SF6 Ring Main Unit with Three load break Switch confirming to international standard and complete with fault passage indicator other accessories.

Supply and termination of out door type end termination heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets / lugs / connectors etc alongwith cable glands at 11KV take - off gantry at 33/11KV sub-station & and at O/H Poles.

Supply and termination of indoor type end termination heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets / lugs / connectors etc alongwith cable glands at 11KV Ring Main Unit & two way on load switch (DEOS). ( 3 for each DEOS & 2 for each RMU )

Supply, erection, testing & commissioning of termination of indoor type end termination heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets / lugs / connectors etc alongwith cable glands at 11KV Ring Main Unit.

Supply, erection, testing & commissioning of termination of outdoor type end termination heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets / lugs / connectors etc alongwith cable glands at Transformer centre AB Switch

Supply, erection, testing & commissioning of XLPE heat shrinkable straight through jointing kit for 300 sq.mm, 3 core, 11KV XLPE cable.

Supply and laying of precast RCC hume pipe of size 150 mm with required number of collars using cement mortar 1:2 for road crossing and at any other crossing as ordered.

RCC protective covers of size 600mm length x 250mm width x 37mm thick

Supply and laying of river sand for cushioning of 11 KV XLPE cable.Rounded to whole No.

Supply and installing of cable route Makers (for entire route length) at 50 Mts each

GI Riser Pipe 100mm, class B, for 95 sq. mm. cable support , 3.5Mts. for each DP.

Supply and erection of earthing with 40mm dia x 2.5 mts long class 'B' GI pipe, with charcoal, salt, inserted in pit excavated of size not less than 500mm x 500mm x 2400mm as per Drg No. CEE/E-829( 2 for each RMU & DEOS).

HDG Strip 25mm x 5 mm for connecting earthing for RMU & DEOS ( 6 mts for each RMU )

supply and laying of Bricks for saparation of 2 cables

Warning tape

Providing and laying in position cement concreate 1:2:4(1 Cement:2 coarse sand:4 graded granitic or basaltic stone agregate 40mm nominal size for foundations of RMU and DEOS(0.5 cu mt/ Per RMU/DEOS)

Centering and shuttering including struttings,propping etc. and removal of form work for the foundation ,footing,bases of column and mass concrete for RMU and DEOS(3.50sq.mt per DEOs/RMU)

Numbering of RMU/DEOS

Erection

Laying, Testing and Comissioning of 11KV , 3 core 300 sq.mm. A2XFY Al. armoured XLPE cable through conventional open trenching method in any type of soil including hard laterite.

Erection, Testing & commissioning of 3 core, 95 sq.mm Aluminium, XLPE insulated armoured, 11KV (earthed neutral) Cable for connecting to the distribution transformer centres and 11 KV HT installations and any other equipments. (from RMU to Transformer / HT Consumers)

Erection, testing & commissioning of 11KV,630amps,out door,SF6 Ring Main Unit with two load break Switch and one Circuit breaker confirming to international standard and complete with fault passage indicator other accessories.

Erection, testing & commissioning of 11KV,630amps,out door,SF6 Ring Main Unit with Three load break Switch confirming to international standard and complete with fault passage indicator other accessories.

Termination of out door type end termination heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets / lugs / connectors etc alongwith cable glands at 11KV take - off gantry at 33/11KV sub-station & and at O/H Poles.

Termination of indoor type end termination heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets / lugs / connectors etc alongwith cable glands at 11KV Ring Main Unit & two way on load switch (DEOS). ( 3 for each DEOS & 2 for each RMU )

Supply, erection, testing & commissioning of termination of indoor type end termination heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets / lugs / connectors etc alongwith cable glands at 11KV Ring Main Unit.

Erection, testing & commissioning of termination of outdoor type end termination heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets / lugs / connectors etc alongwith cable glands at Transformer centre AB Switch

Erection, testing & commissioning of XLPE heat shrinkable straight through jointing kit for 300 sq.mm, 3 core, 11KV XLPE cable.

Excavation of trench of size 0.9 x 0.45 x (25290 ) Mts for laying of 1 runs of HT cable under ground which includes digging in All kinds of soil

Filling of available excavated earth (excluding rock/stones in trench, plinth, sides, foundations etc. in layer not exceeding 0.2mts. Depth, consolidating each deposited layer by ramming and watering lead up to 50 mts.

Disposasl of surplus excavated soil / material by mechanical transportation and including loading and unloading, stacking, levelling as directed within a distance of 2500 mts.

Laying of precast RCC hume pipe of size 150 mm with required number of collars using cement mortar 1:2 for road crossing and at any other crossing as ordered.

Installing of cable route Makers (for entire route length) at 50 Mts each

GI Riser Pipe 100mm, class B, for 95 sq. mm. cable support , 3.5Mts. for each DP.

Erection of earthing with 40mm dia x 2.5 mts long class 'B' GI pipe, with charcoal, salt, inserted in pit excavated of size not less than 500mm x 500mm x 2400mm as per Drg No. CEE/E-829( 2 for each RMU & DEOS).

HDG Strip 25mm x 5 mm for connecting earthing for RMU & DEOS ( 6 mts for each RMU )

Excavation of soil by mechanical means/manual means for foundation of RMU and DEOS includes digging in any type of soil, (0.60 Cu.mt per RMU/DEOS)

Filling of available excavated earth (excluding rock/stones in trench, plinth, sides, foundations etc. in layer not exceeding 0.2mts. Depth, consolidating each deposited layer by ramming and watering lead up to 50 mts.(0.26 cu.mts per RMU/DEOS)

DISMENTALLING

Dismantling of of RCC pole 11 mtr

Dismantling of of RCC pole 9.0 mtr

Dismantling of Rail pole 90lb/yd

11 KV rated voltange GOAB switches tilting type, outdoor, manually operated, triple pole, single break current rating: 400 A

HDGI Structure Material for Noss G.O.A.B. Switch 11 KV 400 Amps

HDG 11 KV 'V' Shape cross arm of channel ISMC 75 x 40 x 7.3 mm.

HDGI Top Insulator fitting Cross arm ISMC channel 75 x 40 mm, 0.7 mtr long

HDG cut point channel cross arm chaneel ISMC 75X40x7.3mm of 1.3 mts long

HDG S.A stay clamp for 11 mts long RCC pole for cut point

HDG L.A stay clamp for 9 mts long RCC pole for cut point pole

HDG guard cross arm of channel ISMC 75X40X7.5 mm of 1.5 mts long

11 KV brown glazed porcelain Pin Insulator

Forged GI pin suitable for 11 KV glazed porcelain pin insulators

11 Disc Insulators ball afailing load of 45 KN and suitable for ACSR conductor of size upto 18 mm diameter.

Metal parts for 45 KN Disc Insulator

ACSR Conductor alumininium WEASEL 6/1/2.59

ACSR ConductorRACOON( 6/1/4.09 )

11KV/LT HDG.I. stay wire 7/10 SWG

HDGI 11KV/LT Turn buckle with eye bolt CEE/E-466

Break insulator, 8KV 44KN

HDGI stay clamps for RCC Pole 11.00Mts S.A.CEE-E-711

HDG L.A stay clamp for 9 mts long RCC pole as per drg No. CEE/E-524

HDGI stay clamps for Rail pole 90lb/yd

HDGI cross arm clamp LA/SA for 11 mt long RCC pole

HDGI Cross arm clampLA/SA for 9.0 mt long RCC pole

HDGI Cross arm clamp LA/SA for long 90 lb/yd Rail pole

HDG nut bolt of all sizes

Removimng of XLPE insulated armored 11KV (Type A2XFY, FRLS), 3 core 300 mm² aluminum cable

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means for all kinds of soil

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth i and disposal of surplus earth as directed by Engineer in Charge.

Suncity Urja Private Limited