Design, Supply, Erection, Testing & Commissioning of 2x25kV, 50Hz single phase a.c. traction overhead equipment with 65 sq.mm catenary and 107/150 sq.mm contact wire, LT supply transformer stations including modifications to the existing OHE in view of proposed doubling between Tadikalpudi-Bethampudi section with associated yard modifications on Dornakal - Bhadrachalam Road in Secunderabad Division of South Central Railway

The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.

NOTE: If the tender is not accompanied by the certificate(s) in support of financial eligibility as above, the tender shall be rejected. No post-tender correspondence will be entertained.

(a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.

(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender.

Note for b(1): Separate completed works of minimum required values 1.1.1 shall also be considered for fulfillment of technical eligibility criteria for different components.

(b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity.

(b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway.

In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Electrical Engineer in writing. Even for engaging a subcontractor, approval of Cheif Electrical Engineer to be taken duly following GCC conditions.

Note for Item 10.1 of IRSGCC-2022/note for 1 of Standard Technical Criteria of this NIT: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.

If the tender is not accompanied by the documents mentioned above i.e., Certificate in support technical eligibility criteria, the tender shall be rejected. No post-tender correspondence will be entertained. However, if any clarification is required by the Railway, the same will be sought from the tenderer.

Definition of Similar Work (OHE): "Erection, testing and commissioning of 25 kV Overhead Electric Equipment in Railways. (OR) Construction and commissioning of transmission line of 66kV or above voltage of requisite value as per the technical eligibility criteria. In addition, tenderer shall also have experience of having energized 25 kV OHE work of at least 10 TKM or 20% of TKM involved in instant tender whichever is higher from single completed or ongoing work either as separate additional work or as a part of transmission line work produced to satisfy technical eligibility criteria. (OR) Provision or modification to sub-stations/switching stations/switch gear equipment, control and protection equipment, reactors, power factor correction equipment, transformers or any other power equipment in 25 kV Railway Sub-stations/Switching stations or any work pertaining to 66kV and above Electrical sub-station of any PSU/Govt. agencies. In addition, tenderer shall also have experience of having energized 25 kV OHE work of at least 10 TKM or 20% of TKM involved in instant tender whichever is higher from single completed or ongoing work either as separate additional work or as a part of above Substations/Switching stations work produced to satisfy technical eligibility criteria."

The Tenderer should have valid Electrical Contractor's License Grade "A"/33 kV or above issued by Government Electrical Licensing Board (OR) the site Supervisor should posses necessary "A" grade/33kV or above License issued by Government Electrical Licensing authority to carryout works of appropriate voltage. The license should have been issued on a date prior to date of tender opening.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Tender value is including escalation of (-) 20% (minus twenty percent) on CPWD DSR rates. Tenderer should note this before quoting the rates.

The original Bank Guarantee (in lieu of Bid Security) should be delivered in person to the official nominated (i.e Os/Tenders/Engg/____Division) as indicated in the tender document before closing date for submission of bids. (i.e., excluding the last date of submission of Bids)

All the instructions furnished in the Technical Compliance / Commercial Compliance / Custom / Undertakings / General lnstructions / Undertakings are only indicative and not exhaustive. The tenderer shall read the GCC / Tender documents for complete details.

The tenderer shall thoroughly go through the entire tender documents and strictly adhere to the instructions and directions given therein.