PREVENTIVE MAINT AND REPAIR OF INTERNAL ELECTRIC SUPPLY, INTERNAL POINT WIRING OF MD ACCN AND INTERNAL WORK AT INS HAMLA UNDER GE (NW) BHANDUP

Taking down carefully unserviiceable copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by Engineer In Charge.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as specified and as directed by Engineer In Charge.

Material and Labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit with all fittings, accessories for modular point wiring for mounting switches, sockets, regulators etc and also including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. for the following

One light point/ exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed by Engineer In Charge.

Two light point controlled by one, one way switch 6 Amps on the same switch circuit complete all as specified and as directed by Engineer In Charge.

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed by Engineer In Charge.

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed by Engineer In Charge.

One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed by Engineer In Charge.

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed by Engineer In Charge.

(g) One ceiling fan point & regulator controlled by one, one way switch 6 Amps complete all as specified and as directed by Engineer In Charge.

Description all as per 3 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Description all as per 3 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Material and Labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through in and including heavy duty, PVC casing caping with all fittings, accessories, PVC junction boxes etc fixed to walls/ceilings with and including concealed GI metal boxes 1.2 mm thick,(18 Guage) 50mm deep, with earth dolly, covered with modular white cover plate & frame suitable for mounting switches, sockets, regulators etc and also including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge for the following:-

One light point/ exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

Two light point controlled by one, one way switch 6 Amps on the same switch circuit complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point & regulator controlled by one, one way switch 6 Amps complete all as specified and as directed

Description all as per 6 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Description all as per 6 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Material and Labour for point wiring using approved colour coding as per IS ,with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade ISI-694 marked drawn through existing PVC/ Steel concealed conduit with and including concealed GI metal boxes 1.2 mm thick,(18 Guage) 50mm deep, with earth dolly, covered with modular white cover plate & frame of suitable module for mounting switches, sockets, regulators etc and also including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with wiring and connecting to earthcomplete all as specified and as directed by Engineer In Charge for the following

One light point/ exhaust fan point controlled by one, one way switch 6 Amps complete all as specified and as directed

Two light point controlled by one, one way switch 6 Amps on the same switch circuit complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on same board complete all as specified and as directed

One 5 pin socket outlet plug point, 6 Amps, controlled by one, switch on independent board complete all as specified and as directed

One two way light point controlled by two nos. two way 6A switches complete all as specified and as directed

One bell point controlled by one, one way switch 6 Amps complete all as specified and as directed

One ceiling fan point & regulator controlled by one, one way switch 6 Amps complete all as specified and as directed

Description all as per 9 here-in before but using 2.5 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for one 6 pin socket outlet plug point, 6 Amps independent including necessary running of 2.5 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Description all as per 9 here-in before but using 4.0 Sqmm single core copper conductor FRLS cable of multistranded PVC insulated unsheathed 1100 Volts grade for 6/16 Amps power point including necessary running of 4.0 Sqmm PVC insulated multistranded copper conductor single core FRLS cable as earth continuity conductor along with wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge.

Note for Item Ser No 3 to 11: (i) Cutting chases for conduits and sinking's for GI metal switch boxes and making good to walls in cement mortar 1:3 to match with existing surfaces shall be carried out by the contractor without any extra cost from the department. (ii) Partially partly wiring in casing caping with all fittings accessories PVC junction boxes whereever concealed wiring is not possible on the surfaces of RCC slab / ceiling /columns / beams etc shall deemed to be included in the unit rate quoted against item.

Supply and fixing Modular switch, one way 6 A, one module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular switch, Two way 6 A, one module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular Bell push 6A ,one module 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular switch, one way 16 A, one module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular socket outlet multipurpose, 6A - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular socket outlet multipurpose, 6A/16A - 2/3 pin combined 2 module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Modular socket outlet multipurpose, 6A/16A - 2/3 pin combined with 16 Amps MCB 4 module, 230 Volts complete all as specified and as directed by Engineer In Charge.

Supply and fixing Switch piano, flush type, polycarbonate, single pole, one way 6 Amp complete all as specified and as directed by Engineer In Charge.

Supply and fixing Bell push, flush type, polycarbonate, 6 amp complete all as specified and as directed by Engineer In Charge.

Supply and fixing Switch piano, polycarbonate, flush type single pole, one way 16 Ampcomplete all as specified and as directed by Engineer In Charge.

Supply and fixing Socket outlet switch socket outlet, 2-in-1, 6 pin, 6 and 16 Amps, flush type complete all as specified and as directed by Engineer In Charge.

Supply and fixing Socket outlet 2 in 1, 5 pin, 6A complete all as specified and as directed by Engineer In Charge.

M & L Switch socket combination 2 in 1, 6 pin, 6 A flush type complete all as specified and as directed by Engineer In Charge.

M & L Switch socket combination 6A/16A, 6 in 1 flush type complete all as specified and as directed by Engineer In Charge.

Supply and fixing modular stepped type electronic fan regulator flush type, 120W - 2 module suitable for 230V 50Hz AC supply complete all as specified and as directed by Engineer In Charge.

Supply and fixing electric Buzzer, Ding Dong bell suitable for operation on AC. 230 volts, single pole complete all as specified and as directed by Engineer In Charge.

M & L Ceiling rose, 3 terminal /PVC/ polycarbonate, isolated body complete all as specified and as directed by Engineer In Charge.

M & L Lamp holder, PVC/ Polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed by Engineer In Charge.

M & L Fancy Lamp holder, PVC/ Polycarbonate type with back plate of brass terminal suitable for batten fittings complete all as specified and as directed by Engineer In Charge.

Supply and fixing 6 Amps Top Plug with Indicator complete all as specified and as directed by Engineer In Charge.

Supply and fixing 16 Amps Top Plug with Indicator complete all as specified and as directed by Engineer In Charge.

Supply and fixing TV Co - axial Socket - 01 Module complete all as specified and as directed by Engineer In Charge. Make- Legrand, Havells, Jaguar or equivalent.

Supply and fixing USB Charger - 3000mA/15 Watts - Type A + C -1 Module complete all as specified and as directed by Engineer In Charge. Make- Legrand, Havells Jaguar or equivalent.

Supply and fixing 16A - Motor Starter - 2 Module complete all as specified and as directed by Engineer In Charge. Make- Legrand Cat No- 6794 71 or Equivalent in Havells.

Supply and fixing in repairs Modular white cover plate with frame, to true size of the existing concealed metal box & make as per site requirement of

3 Module

4 Module

6 Module

8 Module

12/16 Module

18 Module

Supply and fixing in repairs GI metal flush boxes 1.2 mm thick,(18 Guage) 50mm deep, with earth dolly, suitable for mounting modular white cover plate of size

3 Module ( Make- Legrand Cat No - 6890 08 or equivalent )

4 Module ( Make- Legrand Cat No - 6890 09 or equivalent)

6 Module ( Make- Legrand Cat No - 6890 10 or equivalent )

8 Module ( Make- Legrand Cat No - 6890 42 or equivalent )

12/16 Module ( Make- Legrand Cat No - 6890 11 or equivalent )

18 Module ( Make- Legrand Cat No - 6890 12 or equivalent)

Supply and fixing in repairs Plastic Surface Box -, with earth dolly, suitable for mounting modular white cover plate of size complete all as specified and as directed by Engineer In Charge.

(a) 3 Module ( Make- Legrand Cat No - 6733 03 or equivalent)

(b) 4 Module ( Make- Legrand Cat No -6733 04 or equivalent )

(c) 6 Module ( Make- Legrand Cat No - 6733 06 or equivalent )

(d) 8 Module ( Make- Legrand Cat No -6733 08 or equivalent)

Supply and fixing 3mm thick white (Hylam) sheet for electrical application to incorporate switches, sockets etc including Cutting, drilling, shaping of material to site requirement and fixing with brass cadmium screws of adequate size and length complete all as specified and as directed by Engineer In Charge.

Note for Item Ser No 12 & 39 : (i) Item will also be exercised in repairs means Labour component involved in taking out existing unserviceable from its place and fixing new in position is deemed to be included in the unit rate quoated. (ii) Making good disturbed wall in cement mortar 1:3 , & with wall puti for concealing meatl box and painting wall surface as per existing finish shall be carried out by the contractor without any extra cost from the department

Supply and fixing Energy efficient, Twinglow 25-Watt+25-Watt Led Up-Down Batten (Warm White + Cool White), polycarbonate material, 4' Tubelight fitting, 2500 Lumen complete with standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge. Make-Philips (Product SKU : 919515813875) or equivalent in Jaquar, crompton

Supply and fixing wall/ surface mounted, LED- 35W ± 10% watt Power consumption, AL. Extruded Housing, 230 VAC, 50Hz batten fitting complete with standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge. Make Jaquar Cat No- HBT-WHT-LKBU4KVS35XCor equivalent in Philips, crompton

Supply and fixing wall/ surface mounted, LED-10 W watt Power consumption, AL. Extruded Housing, Input Voltage 140 V AC - 270 V AC, 50Hz, IP 20, batten fitting complete with standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge. Make-Havells Cat No- LHEXACP7IN1W010 or Equivalent in Philips, Jaquar. Cat No- BTI-WHT-LGLZ01X010XW

Supply and fixing energy saving, Full Glow LED Surface Light luminaire complete with Motion Sensor, Power consumption 15 Watt, Round Shape, single Phase 230 Volt. fitting and standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge. Make Philiphs ( Product SKU : 929003671501) or equivalent in Jaquar, Crompton.

S & F for Decorative wall mounted luminaire fitting double arm with decorative glass shade suitable holder for LED bulb complete including Back up LED Bulb cool white, 10 watts-2 Nos , complete all as specified and as directed by Engineer In Charge.Make Jaquar Cat Part No DWL-CHR-MB160275542A or equivalent in Philips (Product SKU : 919215850202) Orient, Crompton.

S & F for Decorative wall surface mounted luminaire fitting single arm with decorative glass shade suitable holder for LED bulb complete including Back up LED Bulb cool white, 10 watts-01 No, complete all as specified and as directed by Engineer In Charge. Make Jaquar Cat Part No DWL-CHR-MB160275531B or equivalent in Philips. Orient, Crompton.

S & F wall surface mounted LED Wall Lamp luminaire fitting Chrome Finsh with inbuilt 6W LED round focus spot light complete all as specified and as directed by Engineer In Charge. Make :- Jaquar Cat Part No DWL-CHR-WL5048X6W or its equivalent in Philips, Orient, Crompton

S & F Highly efficient LED Motion sensor Bulbs, 10 W, output of 900 lumens, cool white, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap, complete and standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge.

S & F Highly efficient 12 Watt, B-22 , Back up LED Bulb cool white, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap, complete and standard warranty of manufacturer from date of purchase/ installation complete all as specified and as directed by Engineer In Charge.

Note for Item Ser No 40 & 48 : (i) Item will also be exercised in repairs means Labour component involved in taking out existing unserviceable from its place and fixing new in position is deemed to be included in the unit rate quoted.

Supply and fixing amp rating 240V, 10KA 'C' curve, IP 20 protected terminals, miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

SP 5 To 32 AMP

SPN 32 AMP

SPN 40 to 63 AMP

Supply and fixing 415V 10KA 'C' curve, IP 20 protected terminals, miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning.

TP 25 To 63 AMP

TPN 16 To 32 AMP

TPN 40 To 100 AMP

S & F sheet metal enclosure suitable for Flush Mounting and Surface Mounting, MCB DB with 100 Amps rated bus bar, Fully shrouded Neutral bars, Earthbar and Cable ties for Cable management, 240 Volts, IP 43 - #IK 09 with metal double door & magnetic locking system including inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface to match the existing colour of wall complete all as specified and as directed by Engineer In Charge.

SPN 4 Way. (Make Legrand Cat No - 5076 10 or equivalent.)

SPN 8 Way. (Make Legrand Cat No - 5076 11 or equivalent. ).

SPN 12 Way. (Make Legrand Cat No - 5076 12 or equivalent. ).

S & F sheet metal enclosure suitable for Flush Mounting and Surface Mounting, MCB DB with 100 Amps rated bus bar for each phase, Fully insulated & shrouded Neutral bars, Earthbar and Cable ties for Cable management, & provision for FP MCB / Isolator / RCCB / RCBO as incomer and SP MCB's as outgoing ,415 Volts, IP 43 - #IK 09 with metal double door & magnetic locking system including inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface in cement mortar to match the existing surface & colour to wall complete all as specified and as directed by Engineer In Charge.

TPN 4 Way. (Make Legrand Cat No -5076 80 or equivalent.)

TPN 6 Way. (Make Legrand Cat No -5076 81 or equivalent).

Supplied and fixed Flush Mounting and Surface Mounting single pole and neutral sheet metal enclosure suitable for 240 V with neutral link, two pin, earth plug and socket plug top complete all as specified and as directed by Engineer In Charge and as directed with

One Single pole MCB upto 20 Amps

S & F sheet metal enclosure suitable for Flush Mounting and Surface Mounting, MCB DB with 250 Amps rated bus bar for each phase, Fully insulated & shrouded 2 Neutral bars, 2 Earthbar and Cable ties for Cable management, & With provision for DPX³ 250 MCCB as incomer and SP/TP MCB's as outgoing, 415 Volts, IP 43 - #IK 09 with metal double door & magnetic locking system including inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of disturbed surface in cement mortar to match the existing surface & colour to wall complete all as specified and as directed by Engineer In Charge.

VTPN 4 Way. (Make Legrand Cat No - 5077 58 orequivalent.)

VTPN 8 Way. (Make Legrand Cat No - 5077 59 orequivalent).

Note for Item Ser No 49 & 54 : (i) Item will also be exercised in repairs means Labour component involved in taking out existing unserviceable from its place and fixing new in position is deemed to be included in the unit rate quoated. (ii) Making good disturbed wall in cement mortar 1:3 , & with wall puti for concealing meatl box and painting wall surface as per existing finish shall be carried out by the contractor without any extra cost from the department

Taking down carefully existing unserviceable main switch /cutout /DBs of any type, capacity and description and removing materials from site and making good disturbed surfaces of walls, floors as per the existing finishes complete all as specified and as directed by Engineer In Charge.

Supply and fixing DPX³ 160 MCCB with O/L & S/C thermal magnetic protection unit, 25 KA breaking Capacity, 4 Pole , 100 Amps, of Make Legrand Cat No 4200 57 or Equivalent in L&T

Supply and fixing DPX³ 160 MCCB with O/L & S/C thermal magnetic protection unit, 25 KA breaking Capacity, 4 Pole , 160 Amps, of Make Legrand Cat No 4200 57 or Equivalent in L&T

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 4 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 16 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 16 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 16 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 4 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 16 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 16 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 16 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 25 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty conduit and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 25 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 25 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 4 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 16 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 16 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 16 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 4 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 16 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 16 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 16 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 25 Sqmm nominal area and drawing into PVC casing caping with all fittings, PVC junction boxes etc and its accessories (ISI marked) of suitable size including PVC insulated multistranded copper conductor 25 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 25 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 4 Sqmm nominal area and drawing into existing surface / recessed, PVC / Steel conduit including PVC insulated multistranded copper conductor 4 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 4 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into existing surface / recessed, PVC / Steel conduit including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into existing surface / recessed, PVC / Steel conduit including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Three run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 6 Sqmm nominal area and drawing into existing surface / recessed, PVC / Steel conduit including PVC insulated multistranded copper conductor 6 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 6 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

M & L for submain wiring with approved colour coding as per IS with four single core PVC insulated FRLS multistranded copper conductor cable of size 10 Sqmm nominal area and drawing into existing surface / recessed, PVC / Steel conduit of suitable size including PVC insulated multistranded copper conductor 10 Sqmm (nominal area) single core FRLS cable as earth continuity conductor along with submain wiring and connecting to earth dolly complete all as specified and as directed by Engineer In Charge. Note- Five run of 10 Sqmm cable and one run of PVC conduit will be measured as one unit complete all as specified and as directed

Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed by Engineer In Charge.

S & F PVC rigid non-metallic conduit of dia 20 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system complete all as specified and directed by Engineer-in- Charge

S & F PVC rigid non-metallic conduit of dia 25 mm dia inclusive of all tees, bends, elbows reducers, junction box etc and fixing accessories such as couplers, lock nuts, saddles, etc for telephone cable , TV cable and public address system complete all as specified and directed by Engineer-in- Charge

Supply and fixing Medium duty SS 304 CABLE PERFORATED TRAYS, rust proof, in standard length of 2.5 Mtr, thickness - 3.0 mm, and height of tray 50mm complete with side SS couplers plates to connect cable trays with each other, SS couplers cable tray bends, and supporting accessories of GI (Galvanized Iron) Threaded Rods, Fasteners, with nuts, bolts, washers etc for fixing cable tray on walls or hanging with ceilings all as specified and as directed complete width of

Cable Tray 150mm

Cable Tray 200mm

Cable Tray 250 mm

Cable Tray 300mm

Note :- Supporting hanging/ wall fixing accesssories, shall be fixed at minimum length 01 Mtr span and will be measured as one length along with cable tray. Rate quoated shall deemed to be included in the unit rate quoted

Labour for taking down of unserviceable ceiling fan of any sweep and make after disconnecting cable end terninal from ceiling rose, dismantling blades and hanging serviceable fan at same location of any sweep, make by connecting cable end terminal to ceiling rose, after fixing blades at site with fan, testing for smooth running complete all as specified and as directed.

Note : Transportation to & fro involved of unserviceable ceiling fan to deposit in EM Store yard Hamla and back to site hanging serviceable fan after collecting from store is deemed to be included with unit rate.

Servicing / over hauling of ceiling fan 230 Volts of any make and sweep, along with following others repairs. a). Dismantaling of ceiling fan complete part by part carefully, testing stator coils, degreasing bearing and display all the parts without damaging any portion for inspection of Engineer-in- Charge to ascertain the serviceability of existing parts b) Heating & varnishing to stator coils with super quality varnish and dried out properely with external heat as ordered & directed. c) Reassembeling of ceiling fan complete with all existing serviceable parts obtained against Item 1 (a), and new parts as required / ordered by Engineer in Charge.

Note (i). Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoated against this Item. (ii).Any unforeseen minor repair and minor parts that are not covered under Item No-86 , (a) to (c) ( Total cost less than Rs 100 ) but required to complete the repair work / smooth functioning of fan shall be deemed to be included with the unit rate. (iii) Transportation of fan to workshop for repair and back to site in EM store yard at Hamla is deemed to be included with unit rate. (iii). Rewinding of stator coils of ceiling fan , where involved shall be measured and paid separetely against relevant item of this schedule. (iv) 3 core PVC insulated and sheathed 0.75 Sqmm cable from ceiling rose to fan connector of adequate length (maximum upto 1 Mtr) and (greasing the bearing with ball bearing grease where involved) shall deemed to be included in the unit rate.

Supply only the following Items to incorporate against relevant ceiling fans items No 86 here-in- before.

Ball bearing rubber sealed for bottom cover 6201 or as per existing

Ball bearing rubber sealed for Top cover 6202 or as per existing

BLDC ceiling fans Printed Circuit Board (PCB) controller 28 Watt -32 Wattt for 5 Star rated fans of Make- Bajaj, Crompton, Havells.

Ceiling fan Remote(Including 02 Batteries) for 5 Star rated BLDC ceiling fans suitable for Make- Bajaj, Crompton, Havells.

Material and labour for rewinding stator of ceiling fan 1200/1400 mm sweep with supper enameled copper wire of existing gauge, and testing complete all as specified and as directed by Engineer In Charge.

M & L in replacement of ceiling fan capacitor 2.5 MFD with or without taking down the ceiling fan fixed at any height refixing in original Position after repaired and connecting up, complete all as specified and as directed by Engineer In Charge.

M & L for taking out old paint of ceiling fan (any size) with paint remover liquid , Preparing smooth surfaces for painting, cleaning all dust etc, filling cavities with filler, and Painting of complete ceiling fans including blades with synthetic enamel white rust proof paint by spraying complete all as specified and as directed by Engineer In Charge.

S & F Ceiling fan down rods cut to required length as per site requirement of 15 mm dia GI pipe (medium grade) to the existing trusses of any height including necessary welding, drilling holes complete all as specified and as directed by Engineer In Charge.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed by Engineer In Charge.

Supply and fix electronic meters temper proof LCD display with polycarbonate cover , 3 Phase 230 V, 10- 60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and as directed by Engineer In Charge.

Supply and fixing, fresh air (exhaust) fan plastic body of 250mm sweep, AC single phase, 240V, 50 Hz, Input Voltage, 140-285, , with louvers and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to PVC connector block of fan and taking down old exhaust fan carrying to deposit in AGE E/M store yard Hamla complete all as specified and as directed by Engineer In Charge.

Supply and fixing, fresh air (exhaust) fan plastic body of 200mm sweep, AC single phase, 240V, 50 Hz, Input Voltage, 140-285, , with louvers and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to PVC connector block of fan and taking down old exhaust fan carrying to deposit in AGE E/M store yard Hamla complete all as specified and as directed by Engineer In Charge.

Supply and fixing, fresh air (exhaust) fan plastic body of 150mm sweep, AC single phase, 240V, 50 Hz, Input Voltage, 140-285, , with louvers and including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to PVC connector block of fan and taking down old exhaust fan carrying to deposit in AGE E/M store yard Hamla complete all as specified and as directed by Engineer In Charge.

Taking down chowkat or frame ( Wooden) / Steel not exc. 1.5 sq. m and removing to store complete all as specified and as directed by Engineer In Charge.

Supply and fix extruded Powder coated Anodised aluminium section as in window, door, and ventilator shutters, fixed type without sash bar, (powder coating of any colour (Thickness or powder coating not less than 50 micron). with movable, openable or fixed type shutter or any pattern as directed, provision for exhaust fan opening & adjustable louvers, aluminium section weighing 0.55 kg/m including necessary glass 3mm thick ordinary quality, frosted joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, roller, handle, locks etc etc. complete all as specified and as directed by Engineer In Charge.

M& L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including GI strip 25×4 mm as earthing lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel drawn through GI pipe 40 mm dia medium grade pipe for protection of G.I earth strip, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with precast RCC cover in CC 1:2:4 type B1 with handle , with G.I 20 mm dia medium grade pipe for watering and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed by Engineer In Charge.

M & L for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick, buried vertically in ground (Earth pit not less than 2.25 metres deep below normal ground level and top edge of the plate not less than 1.5 m below ground level), connected to and including galvnised steel earthing lead wire 4 mm dia, by means of bolts, nuts, check nuts and washers etc; GI pipe 15 mm dia medium grade pipe for protection of G.I earth lead wire, both to be provided to the extent of 7.5 metres, all as shown on electrical plate No 3 of MES SSR-2009 Part-I, other end connected to electrical main switch board (inside the bldg) GI protection pipe buried in ground, laid under floors/plinths or fixed on walls or concealed in walls etc; with provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate , including PCC 1: 2 : 4 type B-1 earth pit with M.S angle iron frame, cast iron cover with locking arrangement, with G.I 20 mm dia medium grade pipe and M.S funnel with wire mesh for watering arrangement, including necessary excavation and earth work in any type of strata & testing on completion complete all as specified and as directed. Note for Item No 97 to 98. Item cost includes cost of dismantling unserviceable earthing pit above ground level with earthing electrode and making good as per existing ground complete all as specified and as directed by Engineer In Charge.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 1,08,295.00 (Minus) as listed in Schedule of Credit Note 1:- Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

Please Enable Macros to View BoQ information