CERTAIN REPAIR AND MAINT OF INTERNAL WIRING AND CONNECTED AREA OF ASD AREA OF COD UNDER AGE E/M OF GE (EAST) JABALPUR

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc and making good disturbed surfaces of walls, floors, as per existing finishes etc complete all as specified.

Taking down carefully unserviceable/partly unserviceable light fittings any type, tube light fittings and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes complete all as specified and directed.

Taking down serviceable/unserviceable electric meter including meter box from existing position carefully for refixing adjacent to main switch board including making good to disturbed surfaces to match with existing surfaces complete all as specified. Note : Unserviceable meter shall be deposited to E/M Store.

Taking down sub main wiring of any size/capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces

Fixing only serviceable electric meter on & including wooden board to the wall and including making good disturbed surfaces to match with the existing surfaces

M&L for the following point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS), with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm (FRLS) stranded for earth continuity wire, to be drawn in and including, PVC medium grade conduit not less then 20 mm dia with MS sheet metal sunken switch/Terminal box 1.2 mm thick and hylam switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Make of cable - FINOLEX / PLAZA / HAVELLS/POLYCAB & Make of PVC conduit & conduit accessories - PLAZA / FINOLEX/ KALINGA. Note : (i) Making good to match with the adjoining surface shall be included in the quoted rate. (ii) Rate shall be included for Cutting/chases of wall/floor/ceiling

-ditto- all as per item No 6 above but One light point controlled by one way switch

-ditto- all as per item No 6 above but One ceiling /exhaust fan point controlled by one switch and regulator

-ditto- all as per item No 6 above but One 3 pin 5 amp socket out point on the same board with other switches.

-ditto- all as per item No 6 above but One 3 pin 5 amps socket out let point on independent board

-ditto- all as per item No 6 above but One bell/buzzer point controlled by one bell push.

-ditto- all as per item No 6 above but One light point controlled by two 2-way switches

-ditto- all as per item No 6 above but for one socket outlet 15 Amp on independent board with 2.5 Sqmm (FRLS) cable and 1.5 Sqmm (FRLS) earth wire.

S&F Switch piano flush type single pole one way 5 amps. Make : Havells/Anchor/ Leader

S&F Switch piano flush button type two ways 5 Amps. Make : Havells/ Anchor/ Leader

S&F Socket out let 2 in one, 5/3 pin 5 Amp. Make : Havells/Anchor/Leader

S&F Switch socket combination 5 Amps 5 pin flush type Make : Havells/Anchor/Leader

S&F Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal. Make : Havells/Anchor/Leader

S&F Ceiling rose, surface bakelite 65x50 mm three terminal complete all as specified Make : Havells/Standard/Anchor/Leader

S&F Call bell AC-230 Volt single pole ding dong Make : Havells/Anchor/Leader

S &F Bell push, flush type 5 Amps. Make : Havells/Anchor/Leader

S&F regulator electronic step type 100/120 watt 5 step complete all as specified and directed Make : Havells/Anchor/Leader

S&F Lamp holder insulated body with back plate for angle holder all as per specified Make : Havells/Anchor/Leader

S &F flame proof point wiring for light/fan complete with stranded copoper, conductor of 1.5sqmm PVC insulated unsheathed electron beam indicated cross linked (EXBL) flame proof building wire 1100 volts grade, confirming to IS 694, multi standard drawn through and including surface mounted ERW steel stove enameled conduit confirming to IS-9537 including flame proof accessoried and fittings, alongwith 1.5 sqmm PVC insulated copper conductor continues earth wire for light controlled by and including one flame proof rotary switch complete all as specified and directed Make : FINOLEX/PLAZA /HAVELLS/POLYCAB. Note :- (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Cutting/ chases measure & paid seperately.

M&L for Sub main wiring power/circuit using PVC insulated EBXxL flame proof copper conductor cable 2 Single core of size 6 Sqmm (FRLS), earth continuity conductor of size 4 Sqmm (FRLS) drawn through ERW steel conduit complete all as specified.

S&F in repairs ERW steel stove enamelled conduit 32 mm bore confirming to IS-9537 including all flame proof accessories and necessary fittings complete all as specified and directed.

S&F flame proof/weather proof LED fitting 40 watts 230 V AC with hook mounting and wire mesh complete all as specified Make : Sudhir/ Philips/ Crompton/ Havells

S&F in repairs FLP/WF switch/Isolator 10 Amps single pole complete all as specified.

S&F in repairs MCB DB flame DB TPN 8 way complete all as specified

S&F in repairs flame proof MCB upto 32A triple pole complete all as specified.

S&F in repairs flame proof MCB upto 32A single pole complete all as specified.

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack, 1x20/18 Watt, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Bajaj/Crompton /Havells/Wipro

S &F LED tube light fittings decorative ultra slim linear fixture with extruded alluminium heat sink envioromentel friendly Energy efficient ready to use pack,1x10 Watt, 2 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc.with all accessories internal prewired & includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable for and mounting clamps PVC squre box 75x75mm - 2 nos. make- Bajaj/Crompton /Havells/Wipro

Supply and fix LED security light fitting of 45 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Bajaj/Havells/Philips

Supply and fix LED security light fitting of 60 watt, aluminium pressure dia cast IP 66 with high power LED & LED driver of make Bajaj/Havells/Philips

S&F Surface mounting round, decorative LED down lighter 10-15 WATT and transulent defuser, prefixed with flat profile and mounting clamps etc., complete all as specified Make BAJAJ / Philips / HAVELLS / CROMPTON

S&F LED light fittings decorative 36/34 Watt surface mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed. Make-BAJAJ/ WIPRO / HAVELLS / CROMPTON

S&F LED light fittings decorative 36/34 Watt recess mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc complete all as specified and directed. Make-BAJAJ / WIPRO / HAVELLS / CROMPTON

S & F High Bay light fitting 90/100 W LED suitable for hanger up to height 10 meter, die cast aluminium housing with heat dissipation fins, easy to maintain, enclosed type, top opening complete with ballast, lamp, reflector, hosing glass with gasket etc.including electrically connected all as specified and directed.MAKE PHILIPHS/WIPRO/HAVELLS

S&F in repairs GI pipe 'light grade' bracket 25mm dia- 0.9m long & 2 set of clamps made out of 30x5mm MS flat & fixed with anchor bolt suitable for 45/60W security light fitting complete all as specified and directed

S&F in repairs earth enclosure with 2 pin earth plug socket complete with MCB SP 20/25 Amp,flush mounting type Make - LEGRAND/ABB/L&T

Dismantling unserviceable main switch/ kitkat DBs/ MCB including wooden board from existing position and making good disturbed surfaces of wall to match with existing surfaces

S&F MCB DB made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 ways Double door, Make -L&T/ LEGRAND/ SCHNEIDER

S&F MCB DB made of sheet steel, powder painted with bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 4 ways Double door IP-43-IK09 protection grade, Make -L&T/ LEGRAND/ SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail ,230 Volts SPN with 8 ways Double door , IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

S&F MCB DB made of sheet steel , powder painted with nuetral bus bar 200 A, neutral link, earth bar and Din rail , 230 Volts SPN with 12 ways Double door IP-43-IK09 protection grade, Make -L&T/LEGRAND/SCHNEIDER

NOTE FOR ITEM Nos 36 to 39 -(i).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall/DB to be fixed on wall including frame made out of MS flat 40x5mm (ii).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface. (iii) MAKE OF DB & MCB L&T/LEGRAND/ SCHNEIDER

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 0.5 sq mm cond. const (NO./Dia mm) (16/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as as site requirement and as directed by Engr-in-Charge. make- polycab/Hevells/Plaza

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 0.75 sq mm cond. const (NO./Dia mm) (24/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as as site requirement and as directed by Engr-in-Charge. make- polycab/Hevells/Plaza

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 1 sq mm cond. const (NO./Dia mm) (32/0.20) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as as site requirement and as directed by Engr-in-Charge. make- polycab/Hevells/Plaza

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 1.5 sq mm cond. const (NO./Dia mm) (30/0.25) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as as site requirement and as directed by Engr-in-Charge. make- polycab/Hevells/Plaza

S&F in repair of pvc insulated unsheathed bright annealed bare copper conductor 2.5 sq mm cond. const (NO./Dia mm) (50/0.25) single core industrial cable & pvc insulated, pvc round sheathed multicore indistrial cable for voltage grade up to 1100 V as per IS 694:1990 as as site requirement and as directed by Engr-in-Charge. make- polycab/Hevells/Plaza

S&F in repair of Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor cable 2 Single core of size 4 Sq mm, earth continuity conductor of size 2.5 Sq mm to be drawn through and including PVC conduit 25 mm dia medium grade concealed in walls/roof/floors all as directed by Engineer in Charge. Notes:- (i) Two wires of 4 Sq mm and one wire of 2.5 Sq mm and one run of PVC conduit shall be measured as one unit.

S&F in repair of service connection cable using PVC insulated unsheathed, aluminium conductor cable 2 core of size 10 Sq mm, of standred nomenclature follow SEI normes all as directed by Engr-in-Charge.

S&F in repair of service connection cable using PVC insulated unsheathed, aluminium conductor cable 2 core of size 16 Sq mm, of standred nomenclature follow SEI normes all as directed by Engr-in-Charge.

S&F Sub main wiring power/circuit using PVC insulated unsheathed, stranded copper conductor multicore flexible wires of cable 4 core of size 10 Sq mm, earth continuity conductor of size 2x6 Sq mm to be drawn through and including PVC conduit 50 mm dia medium grade conceled in walls/roof/floors through PVC conduit all as directed by Engineer in Charge.

S&F in repairs MCB TPN 415 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 63Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SPN 240 Volts, 'C' series, breaking capacity 10 KA of rating 6-32Amps complete all as specified Make -L&T/LEGRAND/SCHNEIDER

S&F in repairs MCB SP 6-32 Amps 'C' series, breaking capacity 10 KA of rating complete all as specified Make -L&T/LEGRAND/SCHNEIDER

Earthing complete with galvanized steel earth plate electrode 600mm x600 mm x 6mm buried directly in ground vertically to a depth not less then 2.25 meter below normal ground level with top edge of the plate not less then 1.50 meter below normal ground level connected to galvanized earth wire 4.00mmdia by means of bolts ,nuts ,check nuts and washers complete up to and including test point made out of 40 x 6mm alum flat including earthing pit , charcoal common salt ,Earthing lead 4.00mm dia up to 7.5m, 20mm dia medium grade GI watering pipe ,G.I. protection pipe 15 mm dia up to 7.5m long,,PPC pit in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate ,PCC pit cover including earth work complete all as shown in electrical plate No-3 of SSR-2009 (part-I)

Refixing of servicable MCB any type or size

Taking down partly unservicable tube light fittings any type, and fixtures, etc, and Refixing the same after repair including making good the disturbed surface complete all as specified.

Supply & Fix in repairs LED bulb of 7 Watt make of bajaj / crompton /Wipro

Supply & Fix in repairs LED bulb of 9 Watt make of bajaj / crompton / Wipro

Supply & Fix in repairs LED bulb of 12 Wattmake of bajaj / crompton / Wipro

Supply & Fix in repairs LED bulb of 15 Watt make of bajaj / crompton / Wipro

Supply & Fix in repairs LED tube rod of 18/20 Watt make of bajaj / crompton / Wipro

Supply & Fix in repairs LED Batten suitable for 18/20 Watt LED tube make of bajaj / crompton / Wipro

Supply & fix LED Lamp 40/45 watt type RETROFIT E-22 BASE MAKE : BAJAJ/WIPRO/ KHAITAN/ SYSKA/CROMPTON

Supply & fix LED Lamp 30/35watt type RETROFIT E-22 BASE MAKE : BAJAJ/WIPRO/ KHAITAN/ CROMPTON

Supply & fix LED Lamp 20/25 watt type RETROFIT E-22 BASE MAKE : BAJAJ/WIPRO/ KHAITAN/CROMPTON

Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enamelled copper wire with necessary insulating materials such as vertex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts, (spareparts will be measured & paid separately) including necessary lathe work for fixing of bush/bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportion to workshop, for 1200/1400/1500mm sweep fan :- (i) Split pin - 02 Nos (ii) Connection block - 1 No (iii) Insulation rubber bush. - 01 No

Fixing or hanging only ceiling fan after winding fan under item No. 65 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed

All as per item No. 65 here-in-above but exhaust fan of size 225mm to 450mm sweep (except rubber roll, split pin)

Fixing only Exhaust fan after winding fan under item No. 67 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed

All as pr item No. 65 here-in-above but air circulater fan of size 600 mm to 750mm sweep (except rubber roll, split pin)

Fixing only air circulater fan after winding fan under item No. 69 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed

All as pr item No. 65 here-in-above but wall fan of size 300 to 400 mm sweep (except rubber roll, split pin)

Fixing only wall fan after winding fan under item No. 71 above and connecting up including provision of 3 core 1.5 Sqmm cable from ceiling rose or connector to fan (max up to 1m length) all as specified and directed

Overhauling of ceiling fan of any make and sweep after opening and cleaning rotor bearing and stator properly and oiling/greasing of bearing/ bushes, reassmbling the same, fixing and coonecting on its existing position and testing on completion all as specified and as directed including taking down. (Note- (A) Overhauling of ceiling fans will be carried out at AGE E/M Yard only. (B) The spares required shall be measured and paid separately in the relevant items).

Taking down exhaust fan, of any size and type & cleaning/servicing and overhauling the same, refixing the same on its existing position and connection up.

Supply, fixing and connecting up flexible copper wire twin core of 23/.0078.

Supply only gun metal bush of any size (Make - MSP).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6201/6202).

Supply only bearing for ceiling fan (Make - TATA/SKF No.6203/6204).

Supply only fan condensor 2.5 MFD (Make – USHA / UNIVERSAL).

Supply only fan condensor 4 MFD (Make – USHA / UNIVERSAL).

Supply only split pin.

S&F canopy of ceiling fan bottom and upper side of size 1200/1400/1500mm Make :- Usha / Orient / Polar

Painting of ceiling fan 1200/1400 mm sweep complete including fan blade down rod with synthetic enamelled paint of white tint including cleaning and removing dust and dirt and making smooth surface for painting including writing MES No complete all as specified.

Supply & fix fan blade made out of aluminium alloy suitable for wall mounting fan of size 300 to 450 mm

Supply & fix GI tubing light grade 40 mm dia use as down rod of ceiling fan, cut to required length & incl. drilling of hole at both side complete all as specified

Supply & fix GI tubing light grade 20 mm dia use as down rod of ceiling fan, cut to required length & incl. drilling of hole at both side complete all as specified

Supply & fix GI tubing light grade 15 mm dia use as down rod of ceiling fan, cut to required length & incl. drilling of hole at both side complete all as specified

S & F in repairs Mild steel work in framed work such as Fan hooks, Clamps, gratings, ladders etc., with ends of bars welded and/ or riveted, or forged and similar work confirming to Fe 410 - O or Fe 310 - O and incl painting to surfaces using two coats of metallic primer and a coat of synthetic enamelled paint of desired colour as directed.

S& F MCCB DB VERTCLE TYPE made of sheet steel , powder painted with NUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade , 415Volts TPN with 4 way Double door , of make Legrand/Seimens/L&T

Taking down of MCB DB/MCCB of any types and any size

S&F MCCB 63 A 25 KA,4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager

S&F MCCB 100 A 25 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager

S&F MCCB 160 A 35 KA, 4 POLE ,thermal magnetic relese, Ics=100% Icu complete all as specified Make : L&T / Schneider/Hager

S&F in repairs infra red light sensor (Ceiling mounted) with adjustable dusk to down setting to sense motion and direct wheather human has moved in or out of the sensor range time delay control min 10 sec plus minus 5 sec, max plus minus 2 min adjustable, light label control 5 lux to 2000 lux, rated load 1100 watt (incandscent), 550 watt halogen or 250 watt LED complete with testing complete all as directed by Engr-in-Charge.Make Vinay, Luker, Phillips, Bajaj.

S&F Single phase electronic meter with LED display of raing 5-30 Amp with Earth fault protection totally enclosed in PVC box with necessary arrangement to fixing the meter at suitable on wall/floor complete all as spceified and directed by Engr-in-Charge

S&F Three phase electronic meter with LED display of raing 5-40 Amp with Earth fault protection totally enclosed in PVC box with necessary arrangement to fixing the meter at suitable on wall/floor complete all as spceified and directed by Engr-in-Charge

Schedule of Credit amounting to Rs. 67,029.00 to be deducted during AOC.

Goodluck Enterprises

ELCON

RAVI TEJ BUILDERS