Day to day maint of internal electrification, fittings and fixtures at Mil Stn Gaya

Amount

Taking down carefully aluminum point wiring (light/fan/socket power) complete, including fixture and fitting such as switches, ceilling roses, pendants, regulators, socket, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors, etc.

Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete.

Taking down old unserviceable UG cable/service cable of any type/size.

Taking down existing old /UNSV DB /MCB any type.

M & L for point wiring concealed type/surface conduit/casing and caping with 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable 1100 volts grade incl 1.5 Sqmm PVC insulated sheathed copper conductor cable as earth continuity conductor drown through in and incl PVC rigid conduit/ suface conduit/ casing and caping not less than 20mm dia with its accessories pressed steel terminal box made of primer incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following : Make: Plaza/Polycab/KEI

(a) One light/fan/bell point controlled by one No piano type switch 5 Amps single pole one way.

(b) One socket outlet 5/3 pin 5 Amps controlled by one switch on the same board.

(c) One socket outlet 5/3 pin 5 Amps controlled by one switch on indipendent board.

All as per item no. 5 above but one 3 pin socket outlet point 15 Amps independent with cables of size 2.5 Sqmm multistranded, PVC insulated sheathed copper conductor cable and 1.5 Sqmm earth continuity conductor in PVC conduit medium grade.

S & F in replacement of switch piano flush button single pole one way 5 Amp ISI Marked.

S & F in replacement of switch socket comb 2-in-1, 3 Pin 5 Amp flush type ISI Marked.

S & F in replacement of switch socket comination multipurpose 2-in-1, 5 and 15 Amp flush type ISI Marked.

S & F in replacement of lamp hoder insulated body with back plate for batten fittings ISI Marked.

S & F in replacement of ceiling rose, 3 phase PVC/ polycarbonate, isolated body ISI Marked.

S & F in replacement for socket outlet 3/5 pin 5Amp flush type ISI Marked.

S & F in replacement of socket type electronic fan regulator stepped type 100 watts AC ISI Marked.

S & F in replacement of switch type electronic fan regulator stepped type 100 watts AC ISI Marked.

S & F in replacement of 5/6 amp 3 pin plug top ISI Marked.

S & F in replacement of 15/16 amp 3 pin plug top ISI Marked.

S & F in replacement of bell ding dong/ bell musical single phase 230 volts ISI Marked.

S & F in replacement of bell push piano flush type single pole one way 240 volts ISI Marked.

S & F in replacement PVC box suitable for 15 Amp/05 Amp Socket Size 7x4

S & F in replacement PVC box suitable for 15 Amp/05 Amp Socket Size 4x4

S & F in replacement of modular switch piano type 10 Amps one way single pole 240 volts ISI Marked.

S & F in replacement of modular switch piano type 20 Amps ISI Marked.

S & F in replacement of modular socket outlet 10 Amps 5 pin 240 Volts multi socket for cell phone pin or 2 pin+3 pin ISI Marked.

S & F in replacement of modular socket outlet 20 Amps 6 pin 240 Volts twin socket heavy duty ISI Marked.

S & F in replacement of modular bell push large piano type single pole one way 240 volts ISI Marked.

S & F in replacement of modular type single phase motor stator 240 volt grade up to 25 Amps ISI Marked.

S & F in replacement of modular ceiling fan regulator electronic rotary step type 100 Watt 1 module ISI Marked.

S & F in replacement of modular white cover plate with frame 1/2 module ISI Marked.

S & F in replacement of for modular white cover plate with frame 3 module ISI Marked.

S & F in replacement of modular white cover plate with frame 8 module ISI Marked.

S & F in replacement of modular metal flush box for 1/2 module.

S & F in replacement of modular metal flush box for 3 module

S & F in replacement of modular metal flush box for 8 module

S & F in replacement for MCB SP 5 to 30 Amps 240 volts

S & F in replacement for MCB SPN capacity 40 to 60 Amps 240 volts.

S & F in replacement SRCD DBOXX (socket residual current device) protected socket with steel enclosure of 25 Amp capacity complete with all accessories complete all as specified & directed.

S & F in replacement sheet metal enclosure for MCB DB single pole and neutral 4 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 6 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacement sheet metal enclousure for MCB DB single pole and neutral 8 way with 200 Amps rated bus bar 240 volts double door type.

S & F in replacement sheet metal enclosure distribution board with hinged cover IP-43 protection metal door epoxy powder coated/made of insulating meterial like, polystyrene, double door 4 way TPN with suitable rated bus bar for (vertical operation) incorporation of MCCB 4 pole 100 Amps 25 KA complete all as specified and directed. Note : MCCB's, MCB's, Isolators shall be measured and paid separately.

S & F in replacement MCCB 4 pole, 63 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed.

S & F in replacement LED ceiling light fitting 36 watt of size 2 ft x 2 ft, LED clean room bottom opening luminaire for hygenic facilities, dust free zero maintenance ceiling mounted aluminium frame complete fitting, including LED panel in white, 230 volt energy saving, enviromental friendly, long life, corrosion resistant, impact proof, surface mounting IP-65 luminaire with PC Housing in opal finish suitable for wet location with brightness LED edge lit luminaire suitable for armstrong/grid ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Make: Havells Product code BOCR2x2R36WLED857SPCSSGEN or equivalent in Crompton/Bajaj

S & F in replacement LED ceiling light fitting 36 watt of size 2 ft x2 ft, LED ceiling mounted Merged octagon shaped slim width of the tile makes it seamlessly blend in with the ceiling space with geometric and aligned designed, the tile cane be arranged in symmetric and abstract way to make the ceiling a peice of art as complete fitting, including LED panel in white, 230 volt energy saving, enviromental friendly, long life, corrosion resistant, impact proof, IP-65luminaire with PC Housing in merged octagon shaped suitable for wet location, ceiling complete with all accessories internally prewired and including connected with twin core twisted flexible wire copper conductor cable with suitable size complete all as specified and directed. Make:Crompton Product code VECTOR -II LCTLRF2-36-CDL or equivalent in Havells/Bajaj

S & F in replacement wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make: Crompton Cat part No CCS-100-20-65-HL2-DP-NWH 20W or equivalent in Philips/Havells.

S & F in replacement LED tube light fitting 10 watt, 2 ft long with LED batten in aluminium housing & integrated electronic driver. Make: Havells/Phillips/Syska/Crompton

M & L in replacement AC submain wiring with PVC insulated unsheathed FR copper conductor cable, 1100 Volt grade, multistranded of two runs of single core of size 4 Sqmm and one run of single core 2.5 Sqmm (as earth wire) cable and connected of common earth dolly including drawn through and including non metalic rigid PVC conduit medium grade ISI marked with accessories complete all as specified and directed.

M & L in replacement submain wiring with PVC insulated unsheathed FR copper conductor cable, 1100 Volt grade, multistranded of two runs of single core of size 6 Sqmm & one run of single core 4 Sqmm (as earth wire) cable and connected of common earth dolly including drawn through and including non metalic rigid PVC conduit medium grade ISI marked with accessories complete all as specified and directed.

Taking down existing ceiling fan 1200/1400mm sweep carefully from any differnt location and servicing the same by cleaning, greasing, oiling, replacing the unserviceable minor spare parts etc if, any and kept safely for refixing the same after reassembling complete all as specified and directed. Note: Necessary T&P such as ladder, helper etc shall be arranged by the contractor. (Repairs & spares shall be measured and paid separately under respective item of sch 'A' as supply only)

Taking down existing exhaust fan 300/350 mm sweep metal body heavy duty including 350/400mm louver shutter and servicing the same by cleaning, greasing, oiling, replacing the unserviceable minor spare parts etc if, any and refixing the same after reassembling ixing in the same position complete all as directed. Note: Necessary T&P such as ladder, helper etc shall be arranged by the contractor. (Repairs & spares shall be measured and paid separately under respective item of sch 'A' as supply only)

Supply only ball bearing No 6202/6203/6204 or as per site requirement suitable for ceiling fan 1200/1400mm sweep Make : NBC /SKF (bearing with 8 balls shall only be used)

Supply only gun metal bush as approved suitable for ceiling fan 1200/1400mm sweep.

Supply only capacitor AC 220/230 volts 2.5 mfd Make : Asian /Tyton/ Crompton Greaves/ Usha/Epcos.

Supply only capacitor AC 220/230 volts 3.5 mfd Make : Asian /Tyton/ Crompton Greaves/ Usha/Epcos.

Supply only rubber reel of fan with MS split clamp, two Nos nuts, bolts and washer complete set of appropriate size for hanging of ceiling fan complete.

Supply only upper & lower canopy (set of two) made of good quality PVC with tightening screws of required size for any make of ceiling fan complete.

M & L for winding of motor of 1200/1400 mm sweep ceiling fan of any make with super enameled copper winding wire of existing gauge (Approx wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.5 Sqmm of length not more than one meter with each fan including white synthetic enamel spray painting of fan and blade after rewinding complete all as specified and directed. Make of winding wire : New India/ Jindal/ Devidyal/ HTP

M & L for winding of motor of 300/3500 mm sweep exhaust fan of any make with super enameled copper winding wire of existing gauge (Approx wt of copper winding wire per fan 350 to 500 gms) including cutting and getting out old burnt winding, sleeve work, varnishing with E class insulation varnish, threading, connections with twin core copper flexible wire of size 0.5 Sqmm of length not more than one meter with each fan including gray synthetic enamel spray painting of exhaust fan, blade and frame after rewinding complete all as specified and directed. Make of winding wire : New India/ Jindal/ Devidyal/ HTP Notes for item No. 56 & 57 : (i) Old burnt wire shall be contractor’s property and necessary credit shall be recovered as per credit schedule. (ii) Contractor will mark the CA No with repair/ rewinding date on the fan before handing over to the department. (iii) Any fan repair/rewinding by contractor and found defective within waranty period i.e one year from the date of repair/rewinding the contractor will repair/ rewinding the same without any extra cost. (iv) Contractor will return the fan after rewinding and testing within 7 days from the date of taken over, if not a panelty @ rate of Rs 50/ fan per day will be charged.

Labour only for serviceability check of ceiling fan of any size any make which includes the following:- (a) Functioning of the Fan. (b) Cleaning of Fan (c) Mechanical check i.e tightening of loose screw, nuts, bolts proper oiling after opening of strip and refix (d) Electrical check i.e checking of connections

Labour only for serviceability check of exhaust fan of any size any make which includes the following:- (a) Functioning of the Fan. (b) Cleaning of Fan after taking down. (c) Refixing of fan and mechancal check i.e tightening of loose screw, nuts, bolts (d) Electrical check i.e Checking of connections Note for item No. 58 & 59: (i) The above job shall be carried out by a trained electrician (ii) Spare parts reqd to be replaced shall be paid under respective items of Sch 'A' (iii) Necessary T&P such as ladder, helper shall be contractors responsibility (iv) The above job will be carried out in entire Gaya Military Station and necessary documents showing qtr No, Bldg No supported with user sign shall be prepared by contractor as directed by Engineer in Charge. (v) The above work handover to contractor as and when site suggested by Engineer-in-Charge and should be completed within three days after issue of work site, failing which penalty charges @ 100/- per day shall be recovered

S & F in replacement of plastic body exhaust fan 200 mm sweep, energy saving fans, 230 V, 50 Hz complete. Make: Khaitan/Havells/Usha Note: Old UNSV exhaust fan shall be deposited to MES store yard

S & F in replacement of ceiling fan 1200mm sweep, energy saving fans, 230 V, 50Hz complete. Make: Khaitan/Havells/Usha Note: Old UNSV ceiling fan shall be deposited to MES store yard

S & F in replacement of steel body exhaust fan 300 mm sweep, energy saving fans, 230 V, 50Hz complete. Make: Khaitan/Havells/Usha Note: Old UNSV exhaust fan shall be deposited to MES store yard

Taking down geysers of any type and any capacity due to rusting of bolts / seepage of wall and re-installation at any location including S & F in repair of heavy duty pin type fastener 4 inch Job long and making necessary inlet/outlet electric & water supply connections from existing source to geyser complete all as specified and as directed

Inspection, checking adjustments and minor repairs of storage water heater 25/35/50 ltr capacity of any type any make vertical/ horizontal type which includes the following :- (a) Inspection, taking out of drain plug & dewatering and refixing the same complete all as directed. (b) Checking water tightness of storage tank. (c) Checking stop cocks with outlet/inlet pipe of geysers, pressure reducing valves etc to ensure free movement of water and easy functioning of parts. (d) Inspecting over flow vent pipe connections to ensure water-tightness and proper flow. (e) Checking and correct earth continuity of electrical items. (f) Checking functioning of heating element and correct setting adjustment of thermostat upto 55ºC. (g) Adjustment of reducing valves, checking of dead weight type high pressure release valve and visual check of fusible plug for its intactness. (h) The cost of spare parts required for repair & mainenance of geysers covered under this item shall be measured and paid separately under the relevant item as supply only. (j) Make of geysers covered under the scope of work :- Sidhson, Bajaj, Recold, Crompton, Orison, Ditz Premier, Peeco, Empire, Shakti, Sahas, Konark Note: Irrespective of the Number of complaints, work against this item of BOQ shall be completed with in 48 hours after handing over the Complaint slip failing which recovery @ Rs 200/-/per geyser per day delay shall be effected from the contractors payment.

Supply only heating element, (Round / triangle type) 2 KW, 230 volts, ISI marked suitable for 25/35/50 ltrs geysers of any make complete all as specified and as directed. Make : USHA / Bajaj / Recold /Theta.

Supply only thermostat switch for geysers of 25/50 ltrs capacity (ISI marked) complete all as specified and as directed. Make : USHA / Bajaj /Theta / Elcon.

Supply only indicator lamp for geyser of any type colour green & red complete all as specified and as directed. Make : Usha / Bajaj/ Crompton

Supply only base assembly, compatible to existing geyser with inlet, thermostat pipe, drain plug inclusive of clamps for holding the element with nuts, bolts and gasket complete all as specified and as directed.

Supply only stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7kg/sqcm suitable for 25/35 ltrs capacity geysers (wt not less than 3.75 kg) as per sample complete all as specified and as directed.

Supply only of stainless-steel inner tank of minimum 20 gauge sheet rated pressure not less than 7 Kg/sqcm suitable for 50 ltrs capacity geysers (wt not less than 5.25 kg) as per sample complete all as specified and as directed.

S & F PVC connection for hot/ cold water made of double layer nylon braided and fabric at a pressure of 6kg/sq cm at both ends, 600 mm long, heavy duty with CP brass adopters, washers, suitable for 15 mm bore pipe complete all as specified and as directed. Make : PRAYAG/ POLYTUFF/ SHAKTI

S & F 3 core PVC insulated copper cable of size 40/0.0076 multi stranded complete all as specified and as directed. Make : Finolex/Paragon/Kalinga/L&T/ Plaza/Gold Medal/Havells/ HPL/Indo Asian

S & F stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, chromium plated fancy type, screwed both ends for 15mm bore iron pipe or for union, ISI marked, complete all as specified and as directed.

M & L for taking down and spray painting to geyser of 25/50 Ltr capacity at site where installed and painting with synthetic enemal paint including filling of cavities with approved filler complete and refixing in existing after drying.

S&F of electric water heater 25 Ltr capacity, steel body with copper inner tank and heating element upto 2 KW capacity, 230 Volts, BEE 5 star rated with all accessories such as safety valve, thermostate, NRV, connection piece etc, fixing on wall through proper nut, bolt, and fastner including electric and water connection complete all as specified and directed. Make: Havells/Bajaj/Crompton Greaves/ Racold

M & L for earthing complete with galvanized earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below ground level connected to galvenised earth lead wire of 4 mm dia by means of nuts, bolts, washes of galvanized iron or steel all as shown in electrical plate No 5 and testing on completion including adequate charcoal dust comman salt necessary excavation & earth work PCC(1:3:6) type C-1 pit with precast RCC Cover slab 40 mm thick in PCC(1:2:4) type B-0 reinforced with 6 mm dia MS bars @ 100 mm c/c both ways with funnel wire mesh and 20 mm dia GI pipe medium grade as watering pipe and connected to earthing test point complete all as specified and as directed.

Supply, Installation, commisioning and testing LT feeder piller box out door type double door and single shutter front open including locking arrangement system made out of MS sheet of 3.00mm CRCA sheet of size 0.6x0.6x0.3 mtr and double door, canopy, dust proof, bottom cable entry plate and gland for cable size 95/70/50/25/16/10 sqmm 3.5 core suitable MS angle iron 40x40x5 mm with aluminium busbar size 800 Amps system mounted on hygroscopic insulators bus bar including suitable nut, bolt and washer (16 nos), nad including powder coated paint with and providing necessary foundation/plateform of the feeder pillar height 1.5 feet from groundwith PCC 1:2:4 type B2 including provision of for incoming and outgoing cable gland, thimbling and proper finishing as per existing surface complete all as specified and directed by Engr-in-charge.

S & F in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 10 Sqmm two core nominal cross section complete all as specified and directed.

S & F in replacement of service wire 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape armoured with tape and overall PVC sheathed 16 Sqmm two core nominal cross section complete all as specified and directed.

S & F in replacement building security light fitting 1x 35/36 W LED new generation energy saving & environmental friendly long life LED street/bldg security light made up of pressure die cast aluminium housing with mid power LED as lighting source and PC cover having top opening including driver compartment driver with IP 66 protection and impact resistance of IK07 including with suitable for 32mm dia medium grade GI bracket not exc 1.5 mtr length made to shape & fixing on pole/wall with 2 nos of MS clamp including necessary connection from LT OH line /buildings Make: Havells/Crompton/Bajaj.

Supply & laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, armoured, heavy duty elecric cable with alluminium conductor, 1100 volt grade cross sectional area 16 Sqmm 4 core.

Supply & laying in trenches /laid in floor/duct/drawn through conduit XLPE insulated, armoured, heavy duty elecric cable with alluminium conductor, 1100 volt grade cross sectional area 25 Sqmm 4 core.

Excavation in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as per & directed.

Returning filling including spreading levelling watering & well Ramming in layers not exc 25 cm

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed.

M & L for laying of HDPE double wall corrugated pipes in trench for UG cable protection conforming to IS-14930 Part-II with IP-67 having outer dia 50 mm and inner dia of 38 mm including necessary fittings such as couplers, bends etc complete all as specified and directed. Make: Rex/ Rudrax Polymers/Finolex

M & L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate for coping around poles, including necessary form work finishing even and smooth without using extra cement all as specified and directed.

M & L for GI tubing 40 mm dia light grade with all fittings laid in trenches/making GI bracket of security lights/ provn for ceiling fan ponit including bending of suitable size/support of UG cable as required at site as directed by Engr-in-Charge.

MS HARI MOHAN GUPTA