Construction of Additional Accommodation for Junior Engineer Residance building in (first floor) at HP PWD Jalog Tehsil Sunni District Shimla HP

Amount

Brick work using common burnt clay building bricks in Rat Trap bond bricks masonry (on 3" edge) cavity should be broken after six layers, the course below sill and lintel to be a solid course. The masonry on the side of the opening also to be solid in cement mortar 1:4 (1 cement : 4 sand) with second class bricks upto all floor level. as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Half brick work using common burnt clay building bricks in super structure above plinth level upto all floor level using second class building bricks in cement mortar 1:4 ( one cement : four sand) as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Providing wood work in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position upto all floor level and as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts. Sal wood.

Providing and fixing first class deodar wood 40 mm (forty milimetres) panelled, glazed or penelled and glazed shutters for doors, windows and clerestroy window having double glass panes including blacked enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering up to all floor level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 30cm in girth and finished even and smooth Cement mortar 1:6 (1 cement : 6 sand ) as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing first class deodar wood 25 mm (twenty five milimetres) panelled, glazed or penelled and glazed shutters for doors, windows and clerestroy window having double glass panes including blacked enamelled iron butt hinges with necessary screws including carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge.

Form work:-Providing form work with steel plates 3.15mm (three point fifteen milimeters) thick welded with angle iron in frame 30x30x5mm (thrity into thrity into five milimeters ) so as to give a fair finish including centering, shuttering, strutting and propping etc., with wooden steel battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding all heights and removal of the same for insitu-reinforced concrete and plain concrete work including carriage of material upto all leads and lifts as per the direction of the Engineer-in-Charge. (a )Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth string courses and the like.

Providing and laying cement concrete work 1:2:4 (one cement : two sand : four graded stone aggregate 20 mm nominal size) (twenty millimeters) Mechanically mixed and vibrated for compacting concrete and curing complete excluding cost of form work and reinforcement for reinforced concrete work, including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge. (i) Suspended floors, roofs, landings and shelves and their support balconies, beams, girders, bressumers and cantilevers upto all floor level.

Providing Tor steel reinforcement including cost of binding wire for R.C.C.work including bending, binding and placing in position complete in all floor level in all heights,and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and laying cement concrete 1:5:10 (one cement isto Five sand isto ten graded crushed stone aggregate 20 milimetre( twenty milimetre) nominal size and curing complete excluding the cost of form work and carriage of materials in all leads lifts as per the direction of Engineer-In-Charge.

Providing and Laying 10 mm thick antiskid water proof stain and impact resistant heavy duty vetrified tiles size of(600x600x10 mm) with granite border of 23 cm wide proof approved shade and colour in flooring, treads, steps and landings laid over 12 mm thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. (BELL-ORIENT/ NITCO/KAZARIA or its Equivalent)

White glazed tiles 6 mm ( six millimetre) thick in flooring, treads and landing laid on a bed of 12 mm thick cement mortar 1:3 (one cement : three sand) and finished with flush pointing of white cement complete including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Kota stone mirror polished (55x55mm size) slab flooring 20mm (average)thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete 40mm thick i/c carriage of marerials in all leads and lifts and as per thedirection of Engineer-in-Charge . 25 mm thick.( twenty five milimetre)

Providing and laying 20 mm (twenty milimetres) granite stone in flooring laid on 20 mm (average) thick base of Cement mortar1:3 (one sand isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing and polishing complete, including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing steel work of TATA,SAIL or RASHTRIYA ISPAT welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee, flats / hollow section with connecting plates or angle cleats as in main and corss beams, hips and jack rafters, purlins connected to common rafters and the like and as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required complete. including carriage of materials with all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing M.S.(BP) black sheet 2mm thick (two millimetre ) thick facia /soffits/ ceiling including fixing with angle iron including cutting, welding to steel roof members and applying a coat of red lead primer etc. (angle iron frame to be measured and paid for separetely) complete. ( base members of steel work to be measured and paid for separately) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.-

Providing wood work in frames of false ceiling partitions etc. sawanand put-up in position upto all floor level and as per the direction of Engineer-in-Charge including carriage of material in all leads and lifts.(i) first class deodar wood.

Providing and fixing water proof ply wood lining with butt joining and nails ( frame work and cover fillet to be measured and paid for seperately) 6mm thick. (six milimetre) as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.

Providing and fixing plain square edged cover fillets(beading) 40x12mm ( forty intoTwelve milimetre into six milimetre) section, with wood screws in ceiling and lining including mitring at junctions complete. Ist class deodar wood as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge..

Providing steel work of TATA,SAIL or RASHTRIYA ISPAT welded in built up section/ hollow section trusses & framed work, including cutting,hoisting & fixing in position including applying a priming coat of red lead paint in grating,framed guards,bars ladders,railing brackets and similar works joists channels, angles, tee, flats / hollow section and the like and as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand paper and knotting complete as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Painting two coats(excluding priming coat) on new wood and wood based surfaces,with enamel paint other than white to give an even shade including cleaning the surface of dirt,dust and other foreign matter sand papering and stopping as per HP. PWD. Specifications of 1990 Volume-I with ready mixed paint white.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. .

Applying Birla White wall care putty two or more coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust ,loose material and other foregin matter, sand papered smooth to give final matt finish to the surface complete as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Finishing wall with weather proff exterior grade emulsion of approved design( Apex ultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Applying priming coat on new steel and and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint. other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With ready mixed paint other than white. including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and fixing 250 X 16 mm ( Two hundred fifty into sixteen milimetre)size aluminum sliding door bolts bright finished or / and black enamelled with nuts and screws etc. complete.and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 150 X 10 mm(one hundred fifty into ten milimetre) size aluminum tower bolts (Barrel type) with screws etc. complete.and as per HP. PWD. specifications of 1990 volume-I.including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 100 mm (one hundred milimeter) size handles anodized transparent or dyed required colour and shade with necessary screws etc. complete.and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 40x3 mm (forty into three milimeter) size flat iron hold fast 40 cm (forty centimeter) long including fixing to frame with 10 mm diametre bolts and nutts and wooden plugs and embedded in cement concrete block30x10x15 cm(thirty into ten into fifteen) 1:3:6 (one isto three isto six ) graded stone agreegate 20 mm nominal size. complete.and as per HP. PWD. specifications of 1990 volume-I. including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing to wall ceiling and floor , galvanised mild steel tubes (medium grade), tube fittings and clampos including making good the walls and floor, including carriage of material with in all leads and lifts.and as per the direction of Engineer in charge. (i) 15mm (fifteen milimetres) dia

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm twenty to forty milimetre nominal bore by providing and fixing tee including cutting and threading the pipes complete as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 110x90mm PVC. floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 110x75mm PVC. floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing wash basin cat no 10001 of hind ware or its equivalent in white shadewith single hole for pillar tap with C.I. or M.S. brackets painted white inculding cutting hole and making good the same but exculding fittings angle back 600x480 mm (six hundred into four hundred eighty)as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing vitreous china Pedestal for wash basin complete recessed at the back for the reception of pipe and fitting Of (PRIMA) Cera or its equivalent as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and CP waste with CI and MS brackets painted white including cutting hole and making good the same butt excluding fittings 610x460 mm (six hundred ten into four hundred sixty milimetre) with bowl depth 200 mm (two hundred milimetre) complete as per HPPWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 650mmx450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P Brass screws and washers as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 600x20mm C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws Chromium Plated ISI marked IS No.8934 of Jal /ESS or its equivalent as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 650mmx120mm glass shelf with C.P. brass brackets and guard rail complete, fixed to wooden plugs with C.P brass screws as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing chromium plated brass soap dish ESS-ESS/Jal make with C.P Brass brackets fixed to wooden cleats with C.P brass screws as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 15mm dia C.P. brass stop cock ESS-ESS /Jal as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 15mm dia C.P. Brass bib tap with capstan head ESS-ESS /Jal make as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing 15mm dia C.P. Brass pillar tap with capstan head of ESS-ESS/Jal as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing 15mm mixures for sink with top/ bottomdia swinging spout complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing bath shower complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing vitreous China wash down,water closet Anglo Indian Universal closet of Hindware (European type. W.C. pan) Cat No. 20049 of HIndware or its Equivalent with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and Fixing coloured / white high density 10 /12.50/15.00 litres capacity ( full flush) control low level flushing cistern of Hindware or its equivalent with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm (fifteen milimetres)nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm (forty milimetres) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) . including carriage of materials within all leads and lifts as per the direction of the Engineer-in-Charge

Providing and fixing Black or white plastic seat and cover with Hindware / CERA make. plastic seat (solid/hollow type) and cover for wash down water closet with C.P.brass hinged and rubber buffers as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing C.P. grating 100 mm (one hundred milimetre) diametre. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing P.V.C. connection pipe with brass union 45 cm. length 15mm nominal bore. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 1000 lters capacity P.V.C. water storage tank of I.S.I ; 12701 marked of SINTEX, or its equivelent Inlet and outlet connecution, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement inculding hoisting up to all heights above ground level as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing C.P. Brass bib tap (Superior or heavy type) 15mm dia. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing C.P. brass angle valve without nuts and pipe 15mm dia as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge

Providing and fixing CP brass waste and plug for glazed ware sink wash basin etc. with long screwed shank and fly nut and fixed to steet pipe including vulcanite plug brass chain and stud 32 mm Nominal bore and as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge . .

Providing and fixing 110mm PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing 90 mm PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing PVC. plain bend ISI marked complete including fixing with approved adhesive etc. complete 110 mm dia as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing PVC. plain bend ISI marked complete including fixing with approved adhesive etc. complete 90 mm dia as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. (i) 110 mm as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. (i) 90 mm ias per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes size having 3.8 &4.00 to 4.6 mm thicknees ISI marked including fixing with approved adhesive etc. complete. (i) 110 mm as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes size having 3.8 &4.00 to 4.6 mm thicknees ISI marked including fixing with approved adhesive etc. complete. (i) 90 mm as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Providing and fixing wire gauge shutters using galvanised MS wire gauge of IS gauge designation 85 G with wire of dia 0.56 mm for doors windows and clearstory windows including bright finished black enamelled iron hinges with necessary screws complete.40 mm thick.as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge ..30 mm ( Thirty milimetres) thick. (i) first class kail wood.

Applying two coats of raw linseed oil of new wood and wood based surfaces to give an even shade including cleaning the surface of all dirt, dust and sand papered smooth so as to produce smooth dry and matt surface etc. complete. as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge .

Man mohan thakur

GHANSHYAM

Laxmi Dass Kaundal

ML CONSTRUTION SERVICES