Construction of Sub Divisional Office Zakura.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil

Supply and laying stone soiling graded material (Quarry) I/C Consaolidation in layers, I/C Cost and Carraige of materials from source to the site.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth leve; 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stoneaggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Brick Work with common burnt clay (Non-Modular) bricks of class designation 7.5 in 1:4 cement mortar upto level 5

Providing bricks band 10cm / 7.0 cm thick 5 cm/ 5.7 cm projected from wall face, in brikcs of class designation 7.5 laid in cement mortart 1:4 (1 cement: 4 Coarse sand) and curing complete.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class kail wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class kail wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 30mm thick First class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood

12mm Cement plaster on the rough side of signle or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/10sqm over and including priming coat of water exterior paint applied @ 2.20kg/10sqm)

Pointing on brick work or brick flooring with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled/Struck or weathered Pointing

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.13.0 (Finishing) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing /Fixing of Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete. Size of tile 600x600 mm

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building allm complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Providing hoisting and fixing trusses/pulines/rafters/posts/post-plates or like components including cost of screws etc complete Kashmir Popular wood

Providing and fixing with High rib sheet roofing Including vertical/curved surface Including polymer coated J or L hooks, fixed with polymer coated Jor L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.1. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters incl all carriages upto site of work. including ridges , valleys

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank per liter capacity 8.7

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 20mm OD(SDR-7.4)

PN-16 pipe , 25mm OD(SDR-7.4)

PN-16 pipe , 32mm OD(SDR-7.4)

PN-10 pipe , 50mm OD (SDR-11)

Unions 20mm

Unions 25mm

P/L SWR pipes PV B type i/C all fittings and accessories all complte Job 150mm Pipe i/c Collars

110mm Pipe i/c Collars

75mm Pipe i/c Collars

40mm Pipe

p Trap

Door Bends (110mm. 75mm)

PVC Floor trap

Floor Jalli CP 4"

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone19.0 (Water Supply) aggregate 40 mm nominal size) and inside plastering with cement mortar1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Supply, Installation, testing and commissioning hot water geysers 50 lt capacity

Supply, Installation, testing and commissioning hot water geysers 15 lt capacity

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

P/F pvc connections 24"

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 32 mm dia

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape

Supply and installation health faucet with spray and tube 15mm nominal dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete19.0 (Water Supply) 15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge.

Making soak pit 2.5 m diameter 3.0 meter deep with 45x45 cm dry brickhoney comb shaft with common burnt clay (non modular) bricks of class designation 7.5 bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

Providing and fixing ISI: 12817 marked Stainless Steel Butt Hinges with Stainless Steel screws etc. complete. 125x64x1.90 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 100x10 mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 100 mm

300 MM handles

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

Providing and fixing bright finished brass door latch with necessary screws etc. complete. : 300x16x5 mm

Providing and fixing plained eaves boarding Budloo Wood 300X30MM

P/F of 12mm thick T&G planks made of Imported wood (New zealand pine or equivalent) for roof soffits & Ceiling on wood work in false ceiling, partitions sawn and putup in position to budloo wood (Ceiling Joists). Including cost of necessary adhesive & cost of nails etc. with necessary cornice of required size complete Joists. Incl cost of nails/screws all complete as approved by Engineer-in-charge (Including cost of all material, leads, lifts and carriages ete upto site of work complete).

Providing 40x5 mm flat iron hold fast 40 cm long Including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

CARRIAGE OF MATERIAL BY MECHNICAL TRANSPORT FOR AN AVG LEAD OF 15KM SAND

Aggregate 40MM or Above

Aggregate Below 40mm

Bricks

Steel

Electric Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm FRLS PVC insulated copper conductor singlo coro cable of Polycab /Finolex /RR Kabels /Anchor /Salzer make to be approved by EIC before installation, in surface/recessed merllum class PVC conduit (25 mm dia PVC Conduits including culting of walls /floors with hydraulic cutters and relacing to original position by way of cement plastering/pop/paiting etc complete job including cost of conduits and allied accessories like bends lighting conceal deeps and fan deeps etc), with 6Amps modular switch, modular plate of Anti backteria series of Schnoider ABB/L&T/Legrand/Simens make, suitable Gl box and earthing the point with 1.5 s q.mm FRLS PVC insulated copper conductor single core cable etc. as required. (P+N+E for Normal and invertor points per room is to be provided seperately). The Job further includes providing and fixing of heavy duty Metallic conceled lighting deeps junction boxes and Fan junction deeps of standard make dully Isi marked (to be approved by EIC before Installation) actual numbers to be provided as per site requirement and as per Instructions of EIC complete job

Wiring for lightl power plug with 2X4 sq. mm FRLS PVC Insulated copper conductor single core cable in surface I rocessed medium class PVC conduit (25 mm dia PVC Conduits including cutting of walls /loors with hydraulic cutters and refacing to original position by way of cement plastering/pop/paiting etc complete job) including alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. of Polycab/Finolex /Anchor / RR Kabels /Salzer make.

Wiring for circuit/ submaln wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduil (25 mm dia PVC Conduits for housing of upto 4 Sq.mm wires and 32 mm dia for housing of above 4 Sq.mm wires including cutting of walls /floors with hydraulic cutters and refacing to original position by way of cement plastering/pop/paiting etc complete job) as required. of Polycab/ Finolex/Anchor / RR Kabels /Salzer make 2 X 1.5 sq. mm +1 X1.5 sq. mm earth wire

2 X 2.5 sq. mm +1 X 2.5 sq. mm earth wire

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing of 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. (Anti backteria series of Schneider /ABB /L&T/Legrand/Simens make.)

Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing of 2 No's of 3 pin 5/6 A modular socket outlet and 2 5 No's of 5/6 A modular switch, connections etc as required. (Anti backteria series of Schneider /ABB/L&T/Legrand/Simons make.)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supply and fixing of Indicators (Modular type) fitted on modular grid plate and Gl Boxes complete job

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: 8, 3 nos. blades, 30 cm long down rod, 2nos. canopies, shackle kit, safety rope, copper winding, Power Factornot less than 0.9, Service Value (CM/M//N) minimum 6.00, Air deliveryminimum 230 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speedcontrol and all remaining accessories Including safety pin, nut bolts, washers, temperature rise=75 degree (ma><.), insulation resistancemore than 2 mega óhnı, suitable for 230 V, 50 Hz, single phase ACSupply, earthing etc. complete as required of Usha /Crompton Greaves/Orient/Helonixto be approved by FIC before installation

Supply, Installation testing and commissioning of 250 mm sweep Exhaust Fans of Usha /Crompton Greaves / Orient /Helonix to be approved by EIC before installation, incl making of necessary connections and making of necessary space in walls / Windows as per site.

Supply, Installation, Testing and commissioning of 12 watt LED surface/recessed Down lighters having Aluminium Body,minimum lumens 120 lm/w (commercial type) the luminarios housing/Body should be aluminium dia cast and the luminary optics shall have a high efficiency with transmittance average life of 50000 hrs operating temperature-10 C to +45 C of make incl making of necessary Connections.). The luminary should be L70,LM 80, nabl approved The job further includes replacement warranty of fixture (if damaged /burnt out what so ever reason) for a period of two years reckoned from date of successful commissioning /handing over of site to intending department of Wipra/ philips //Trulux /Regent /Lighting Techonology make to be approved by EIC before installation

Supply, installation, Testing and Commissioning of 10-12 Watts 2 fl long LED tube light fitting having PVC Body (Commercial type) ofof Wipro/philips //Trulux/Regent /Lighting Techonology make dully isi marked incl ceiling rose and 2-core transparent wire for connections complete job.

Supply, Installation, Testing and commissioning of 50 Watts LED flood lighting luminaries having CRCA/Aluminium Body, minimum lumens 100 lm/w,the luminaries housing should be crca/aluminium and the luminary optics shall have a high efficiency with transmittance, average life of 50000 hrs operating temperature-10 C to + 45 C of Wipro/philips//Trulux/Regent/Lighting Techonology make to be approved by EIC before installation.make incl making of necessary Connections. The job further includes replacement warranty of fixture (if damaged/burnt out what so ever reason) for a perind of one years reckoned from date of successful commissioning/handing over of site to intending

Supplying and fixing following way, horizontal type three pole and neutral, sheo! stoel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, Interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Asolator) of Legrend /L&T /ABB /Simens /Schinder make dully isi marked complete with connections. 6 way (4+18), Double door Separate for Heating and Lighting

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of legrand/ABB /Schneider /L&T /Simens make

Supplying and fixing of 32 Amps rating DP 240/415 volts (10KA) of Legrend /L&T/ABB 16 /Simens /Schinder make dully isi marked complete with connections.

Supplying and fixing of 40 Amps rating DP 240/415 volts (10KA) of Legrend/L&T/ABB /Simens /Schinder make dully isi marked complete with connections. of Legrand / ABB

Supplying and fixing of 100 Amps rating DP 240/415 volts (10KA) of Legrend/L&T/ABB Simens /Schinder make dully isi marked complete with connections

Supply, Laying, Testing & Commissioning of 50 sq.mm 2- core armored Al Cable XLPE/PVC Insulated and Steel sheathed of Havells/paramount make, including cost thimbles on input aswell as output sides dully crimped with hydraulic crimping tool incl making of necessary connections

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoall coke and salt as required. The job includes providing and fixing of main hole PVC Chamber with its cover complete job

Providing and fixing 25 mm X 5 mm G. 1. strip on surface or in recess for connections etc. as required

Supply,Installation, Testing & Commissioning of BEE-4 Star rating > 2 Ton Inverter type Split Air Conditioner Hot and Cold Air Conditioner of O-General/Mitsubushle Toshbia make The job turther inchates providing and fitting of indoor unit on wall by employing suitable clamps and outdoor units on angle Iron Stand for holding of out door unit fitted with nuts and bolts, laying of refrigerant copper piping upto 3 mtrs, whereever needed, insulating the copper pipeline with nitrilic foam topping up with refrigerant for additional length of piping etc. complete. The job also includes p/f of pvc flexible drain pipe of length 12 mts alongwith fittings. The job further encompasses carrying out repairs to walls whereever the same are cut. The job includes AMC of AC for a period of two years from date of sucessfull commissioning.

Supply, Installation, Testing & Commissioning of 2 KVA Power Inverter (24 Volls) Sine wave type of make (Sukam/Luminous/Exide/Micro tec make) The invertor shall have inbuilt display unit showing input and output voltage Charging voltage, output current etc with having inbuilt protection device of suitable capacity. The Invertor should invertor and UPS mode of operation. The job further includes Supply. 23 Installation, Testing & Commissioning of 2 No's of 180 AH/12 V Tall tubular Inverter Batteries of same make as of inverter the job includes pvc trolley for housing of battenes job. The job includes AMC of battenes and invertor for a period of three years which includes quarterly servicing of devices & as and when required. complete job.