Repairing/renovation of Toilets

Removing W.C. Pans, Urinal pans, Wash basin and cistern including disconnecting the sanitary & water supply, breaking the flooring and bed concrete, removing carefully and stacking serviceable material as & where directed including throwing the unserviceable material outside as directed by In-charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. Cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - incharge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix

Dismantling the sanitary and plumbing items concrete base surface / I.P.S. chip mosaic marble in floors and walls, make on chipping making existing wall surface wall surface rough including stacking material within 50 meters lead etc. complete

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). V) Refilling the brick bat coba in the w.c. pit

Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering (with water proofing) with vertical grains or cross bands and face veneers on both faces of shutters item including all related hardware material and removing the existing door frame also : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Three Nos door panel.

Factory made solid panel PVC door shutter of single piece extruded profile decorative finished (wood grain finished) item including all related hardware material and removing the existing doors also. 3 +1= 4 Nos. Door panel etc. completed

Providing burnt brick- on edge masonary with second class bricks of conventional type in cement mortar 1:3 including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter, one strip hoop on 25 mm x1.6 mm placed at every third course, properly bent and bounded at ends scaffolding , rocking out joints and watering etc. completed

18 mm Cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). Item including scaffolding and sufficient curing etc. Completed

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying rectified Glazed Ceramic antiskid floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete. (One colour on floor surface)

Providing and fixing water closet squatting pan (Indian type W.C. pan make Jaquar/ hindware/parryware/seabird with 100 mm sand cast iron P or S trap. W.C. pan of size 580x440 (prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the PVC Cistern ISI mark item including the flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the urinal size (mm) 670x330x325 internal flushing type make Jaquar/ hindware/parryware/seabird etc. completed. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing round or Zen under counter wash basin in hindware/parryware/seabird in granite size 450x300x230 mm with all necessary attachment with vertical support in granite etc. complete. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing granite of best quality for urinal partition and counter wash basin flooring of approved colour and feature 14 mm to 20 mm thick in required position with readymade adhesive mortar or approved quality including joint filling with coloured cement slurry cleaning, curing and polishing with one piece material and fixing base as kadappa stone etc. complete

Providing moulding to granite including polishing, rounding, edges as required cleaning etc. complete

Providing and fixing the towel rod with clamps (16 mm dia.) chromium plated 60 cm long

Providing and fixing the pillar cock long neck 15 mm in Jaquar make specified no. CRT-23021 or equivalents make. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the bib cock with flange 15 mm in Jaquqr make specified no. CON 047 KN or equivalent make. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the urinal auto closing concealed urinal flush valve in Jaquqr make code no. PRS-073 or equivalent make (prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing stop cock / angle cock 15/20 mm Jaquar make or equivalent make

Providing and fixing the PVC connection pipe crome polish make Jaquar make with necessary attachment etc. completed

Providing and fixing the waste pipe with necessary attachment etc. completed

Providing and laying G.I. pipe 15/20 mm prakash make (heavy) or equivalent make with all the necessary fittings (i.e. elbow, tee, socket, solution etc. ) as per the site condition, concealed fittings etc. completed

Providing and laying Vent pipe 100/75 mm dia. along the wall vertically including all the necessary fittings i.e. elbow, socket, tee, union etc. completed

Providing and fixing 100 mm C.I. Nahani trap (long arm) including symet grating, bend, connecting piece of C.I. pipe up to the outside face of the wall, making good the damaged surface, testing etc. complete (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the liquid soap dispenser

Providing and fixing 5 mm thick (minimum) and four sides beveling Mirror (Saint globins make) and fixed with mirror button etc. complete. (Size=66” x 20”) & (Size=36” x 20”)(Prior approval of sample and brand work in-charge is necessary before use.)

Distempering with oil bound washable distemper (O.B.D.) with necessary putting of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water tinnable priming coat.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats.

Providing and fixing Aluminium window with non transferred glasses sliding in the aluminium channels/section with shall be smooth, rust free, straight, mitered, and joined mechanically wherever required including cleat angle, all completed in the ladies toilet. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing the hydraulic power Door closer (Godrej make) attached to the steel door frame. Item including the welding and necessary attachment etc. completed. (Prior approval of sample and brand work in-charge is necessary before use.)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass Pillar taps, 32 mm C.P. brass waste of standard pattern, including Painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing the plastic tank (sintex make four layer) with all necessary plumbing material. Item including the removing the existing tank etc. completed)

Providing and fixing the 1” boll cock as per ISI standard specification etc. completed

Providing and fixing the ¾” boll cock as per ISI standard specification etc. completed

Providing and fixing the 1” boll valve (handle type) as per ISI standard specification etc. completed

Providing and fixing the 1” and 3/4” CPVC pipe line with elbow, socket, union, tee, adisive solution etc. completed

Electric work:- Providing and fixing the exhaust fans havell make or ISI standard (12” to 15” Diameter) if required

M/s,A.Y.INFRASTRUCTURE AND DEVELOERS

Mangla And Mangla Construction