Improvements to burial ground and installation of street light at Sattur village Ward No. 26 in Dharwad Tq. Reserve for Category-II (A)

Work to install a 15 m high mast lamp and improvements to Sattur Smashna in Ward No. 26 in Hubballi city

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

Octagonal pole Fabricating, supplying and erection of . ms long hot dip

Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening...

M.S. bracket Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. 4.6.2) Single Arm Bracke...

Flexible Multicore Cable Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation s...

Copper wire Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with ...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Hylum plastic sheet Supplying and fixing hylum plastic sheet 3mm thick with

necessary nitches for fixing switches, regulators etc., and

fixing on existing wood or metal box using N.F. screws.

Fuses Supplying & fixing of Porcelain fuse channel with cut out

on existing wooden/panel using necessary nuts, bolts and

washers. 5.7.2) 32Amps

Contactor Switch Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts,washers and wiring etc., complete with AC-3 Rating and as per ...

MCB Switch Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit br...

Timer Switch Supplying and fixing Microprocessor based Electronic timer

(without contactor, Din Mounting using necessary bolts,

nuts and washers etc.,.) 3-120sec setting.

MS Box Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equi...

Angle Iron Supplying and fixing angle iron frame work fabricated out of M.S.angle iron. and M.S. Flat.with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved pai...

PVC Pipe Supplying heavy gauge PVC conduit pipe . mm dia.mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and running before concreting the slab....

UG Cable 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975...

UG Cable Labour Charges Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 21.05) 2.5 to 25 Sqmm

Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete25.a) Transformer grounding

Pot Head Sl No 35)Epoxy Terminating Kit (Pothead) suitable or 1.1 kV, LTUG Cable item no. 35.01) Up to 4C x 50 Sqmm

Earthing 25.a) GI Grounding pipe, B - Class, 42 mm dia, 2.5 M long, 3.2 mm thick with bolts nuts, GI Strips and washers complete 25.a) Transformer grounding

Centering Work Centering, shuttering, formwork for foundation,sub structure of cross drainages. 5% of the finished concrete item rate ( Addendum-I of vol 01, Sl no 03 of pg no 111