REPAIR TO FURNITURE AT MILITARY STATION NAHAN UNDER GE CHANDIGARH

Amount

FD-220: Removing old unserviceable plastic niwar from charpoy GI pipe and reweaving with new plastic newar 50 to 55mm wide made out of first qualitythred in colour interwoven closely both on top and bottom with 34 beands on long rail and 14 bends on short rail as approved by GE complete all as specified & shown on drawing and as directed by Engr-in Charge Note: (i) Recycled materials shll not be used in the work (ii) Weight of the nylon newer shall not be less than 1.5 kg / each charpoy

FD-03: M&L for re-canning to wooden chair Dining with 1STclass plastic cane 2mm wide half round white colour as per "Godrej" pattern including polishing complete all as specified and as directed by Engineer-in-charge.

FD-258 & 359: M&L for re-canning of seat & back of chair verandha with 1st class plastic cane 4mm wide half round white colour in matt pattern and applying one coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and as directed by Engineer-in-Charge.

FD-229: M&L for re-canning to wooden chair easy with 1st class plastic cane 2mm wide, half round white colour as per “Godrej” pattern including polishing complete all as specified and as directed by Engineer-in-Charge.

FD-229: M&L for re-canning to wooden chair Writing with 1st class plastic cane 2mm wide, half round white colour as per “Godrej” pattern including polishing complete all as specified and as directed by Engineer-in-Charge.

FD-67: Taking out carefully old existing unserviceable lock of any size without any damage to the Almirah Steel and provided with new lock of brass with 4 ( Four) levers to Almirah steel of any type Gde-I quality conforming to IS with duplicate keys, complete all as specified and as directed by Engineer-in-Charge.

Taking out carefully old existing unserviceable handle from almirah steel and provided with newhandle MS chromium plated,complete all as directed by Engineer-in Charge.

M&L for painting including denting if any applying one coat of synthetic enamel panint to almirah steel large on external surface only complete all as specified and shown on drawing (shade shall be approved by GE)

FD-104: All as per above item No. 8 here in before but for almirah Steel Glazed.

FD-67(M) & 1032: All as per above item No. 8 here in before but for almirah Steel medium.

FD-357: M&L for seat cushion of foam 32mm density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge.

FD-357: M&L for long back cushion of foam 32 density covered with resin & fixed cup nails for chair dinning complete all as specified and as directed by Engineer-in-Charge.

M&L for repair to Front leg of chair easy /chair dining /chair writing by replacing unserviceable part in lieu of provided with new Front leg made of 'Shisham' wood including polishing with French polish to external suface of wood complete all as specified and as directed by Engineer- in - Charge.

All as per above item No. 13 here in before but Rear leg

All as per above item No. 13 here in before but Front /Side/ rear rail

All as per above item No. 13 here in before but Arms of chair

FD-231 & 224: M&L for repair to table with drawer of size 900mmx600 x 760mm by replacing unserviceable part in lieu of provided with new Table top 900mmx600x760 mm made out of 19mm thick pre-laminated board & 4mm thick teak wood beading top with nails Complete all as specified and as directed by Engineer-in-Charge.

FD-274: All as per above item No 17 here-in-before but table center(900mmx450mm)

FD-383: All as above item No 17 here-in-before but teapoy verandah (900x450mm)

FD-278: All as per above item No 17 here-in-before but teapoy wooden (600x450mm)

FD-277: All as per above item No 17 here-in-before but table peg (450mmx450mm)

FD-220: Removing to unserviceable long rail having both threaded broken end and provided with new long rail of 32mm dia GI pipe medium grade ISI marked duly threaded both ends complete all as specified and as shown on drg.

FD-220: Removing to unserviceable short rail having both threaded ends broken in lieu of provided with new short rails made out of 32mm dia GI pipe medium of broken long rail obtained from srl item No. 22 here-in-before, threading both ends of short rail and fixed in position complete all as specified and as directed by Engineer-in-charge.

FD-220: Removing to unserviceable legs and provided with new leg made out of short rail obtained from srl item No. 23 above threading and fixed in a position complete all as specified and as directed by Engineer-in-charge.

Removing to unserviceable 3 way elbow, 32mm bore in lieu of provided with new 3 way elbow , 32mm bore duly ISI marked fixed in position including cutting and welding complete all as specified and as directed by Engineer-in-charge.

Removing to unserviceable check nut and provided with new check nut of 32mm bore and 6mm thick and fixed in a position complete all as specified and as directed by Engineer-in-Charge.

Removing of unserviceable wooden block from lower ends of leg and provided with new MS plate of 50mm dia x 3mm thick welded to lower end of leg complete all as specified and as directed by Engineer-in-charge.

FD-84: M&L for repair to table clerk steel (1200mmx600mm) with drawer by replacing of unsv Table top with new Table top made out of 19mm thick pre-laminated particle board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge.

Replacement of drawer lock of table clerk steel Lock with 2Nos Keys.

M&L for painting of two coats with synthetic enamel paint to steel surfaces of clerk table steel complete all as specified and directed.

M&L for repair to table officer steel (1350x770mm)with drawer by replacing of unsv Table top with new Table top made out of 19mm thick pre-laminated particle board & 4mm thick teak wood beading around top fixed with nails Complete all as specified and as directed by Engineer-in-Charge.

Replacement of drawer lock of table officer steel Lock with 2Nos Keys.

M&L for painting of two coats with synthetic enamel paint to steel surfaces of officer table steel complete all as specified and directed.

FD-1009: M&L for replacement of top of table dinning OR's size 900x900x750mm made out of 19 mm thick pre-laminated particles board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly painted with synthetic enamel colour complete all as specified and directed by Engineer-in-Charge.

FD-239: M&L for replacement of top of table Dinning officer (1500mmx900mm) 6 persons made out of 19mm thick pre-laminated particles board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge.

FD-239: M&L for replacement of top of table dinning officer (1800mmx900mm) 8 persons made out of 19mm thick pre-laminated particles board one side teak face and provided teak wood beading/edging of size 19mmx4 mm fixed around the top of Table duly polished to beading complete all as specified and directed by Engineer-in-Charge.

FD-281: Replacement to unserviceable foam cushion and provided with new foam cushion of size 530mmx560mmx100mm thick of 32 density covered with tapestory cloth & cloth stitched with best quality thread complete all as specified and directed by Engineer-in-Charge Make of foam cushion :-- Sleep well / Kurlon/ Feather foam. Note :-- Tapestory cloth shall be of minimum rate Rs 450/- per metre

FD-245 246 & 247: M&L for repair to bed ply wood by replacing unserviceable Head Rest covered with 3.5mm thick ply wood one side teak face other side commercial face Complete all as specified and as directed by Engineer-in-Charge.

All as per above item No 38 here-in-before but Foot rest covered with 3.5mm thick ply wood one side teak face other side commercial face

All as per above item No 38 here-in-before but Long rail made out of sheasham wood

All as per above item No 38 here-in-before but Ply wood top made out of 12mm thick Ply wood.

FD-220: S&F as in repairs 12mm thick(1980mmx900mm size) both side commercial plywood top(ISI marked) BWR grade with & including MS Flat iron 32mmx5mm, 900mm long for 04 Nos in each charpoy having one Nos hole near each end of fixing the plywood top with purpose made round head mild steel nuts & bolts/washer welded and applying two coats of synthetic enamel paints in black colours over a coat of red oxided primer complete all as specified and directed by Engr-in-Charge. Note:- The rate quoted agianst the item shall deem to be included for necessary welding & painting works etc.

FD-1029: M&L for repair for lockers 1100x600x760 mm PB sheet 1.00 mm thick shall be used through out steel hinges 65mm shall be using fixed with shutter and and CP handle 100mm long and CP hasp and staple 75x40x3mm shall be fixed with shutters 20mm dia CP conduit pipe 1.6mm thick with socket shall be provided, including cutting and welding rest all as per drawing including spray painting internally and externarly with synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Removing of unservicable old defaced mirrors unservicable back plywood of mirror frame of table dressing ladies and S&F sheet glass electro copper plated mirror 5mm thick and plywood commerical BWR grade 6mm thick for back side mirror frame and fixing to table all as specified and as directed by Engineer-in-charge.

All as per item No 44 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

Removing of unservicable top from the table dressing ladies S&F new top made out of prelaminated particle board 18 mm thick with 3mm thick beading all as specified and as directed by Engineer-in-charge.

All as per item No 46 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

Removing of unservicable broken plywood from drawer bottom of table dressing ladies and S&F plywood commercial BWR grade 6mm thick all specified and as directed Engineer-in-charge.

All as per item No 48 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

Removing of unservicable sides and front side of drawer of table dressing ladies S&F new 18mm thick prelaminated particle particle board of both sides & on drawer front side beading 3mm thick all specified and as directed Engineer-in-charge.

All as per item No 50 here-in before but table dressing gents all as specified as directed by Engineer-in-charge.

M&L for Seat cushion of foam 32 mm density covered with resin & fixed cup nails for chair writing with back complete all as specified and directed by Engr-in-Charge.

Painting including denting if any applying one coat of synthetic enamel paint to foam w/o back on external surface only complete all as specified and shown on drawing (shade shall be approved by GE)

Removing the unservicable U/s & worn out seat cushion with tapestry cloth from chair dining long back cushion and S&F new foam chushion 75mm thick of 40 density cushion of size as per drg.

M&L for preparation of old treated wood and wood based surfaces of any description over 10 cm in width or Sqm grith and applying one coat of varnishing (finishing coat with synthetic varnish complete all as specified and as directed.

M/s Bhisham Raj and Sons

Shyam And Co.

B S FURNITURE