Special Repair to Commentary Box in Cricket Ground and Construction of sitting platforms around the volleyball court in Ground No. 2 of Directorate of Sports and Physical Education at New University Campus Jammu

Amount

Earth work in excavation by manual/mechanical means in all kinds of soil in bulk evacuation and foundation trenches pits including stacking soil neatly away from the edges, filling back by the sides of foundations and in plinth & retaining walls in 150mm thick layers, ramming, watering and consolidation complete including disposal of Surplus earth outside University Campus.

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) including cost of centering, shuttering (formwork), machine mixing, curing etc. Complete. All work upto plinth level.

--------do--------------- 1:2:4 (1 cement: 2 sand: 4 graded crushed stone aggregate 20 mm nominal size).

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation,plinth and in superstructure including scaffolding/formwork, curing etc. Complete with cement mortar 1:6 ( 1 cement : 6 sand)

15mm Cement plaster on the rough side of single or half brick wall finished with a floating coat of neat cement of mix 1 : 4 ( 1 cement : 4 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New / Old work (two or more coats) over and including priming coat with water thinnable cement primer

Repair to plaster of thickness 12mm to 20 mm in patches including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with cement mortar 1:4, including disposal of rubbish outside the University Campus.

Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm complete). All work upto floor V level.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality. Rectangular shape 600x450 internal dimensions

Providing and fixing powder coated 50 microns aluminum work (10 gauge) for doors, windows, ventilators,Almirahs and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminum sections shall be smooth, rust free, straight, metered and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For frames and shutter of door windows, ventilators & Almirah including providing and fixing hinges / pivots, handles, tower bolts, eye hooks/window stays, including the cost of PVC/neoprene gasket 5mm glass panes / 12mm laminated board on both sides for shutters including the cost of magnetic catchers and locks and the slider channel to slide the glass shutters and including Providing and fixing double action hydraulic floor spring of approved brand and manufacture whereever required at site, complete job as required. The Spacing of Vertical members not to exceed 4’-0” & section to be used is 104 mm x 44.45 mm

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm)

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete: 10 litre capacity -White (Make Parryware/Hindware/Cera)

P&F PVC waste pipe for wash basin including PVC waste fittings. Semi Rigid pipe - 32/40mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions 45 mm length 15 mm nominal bore

Supply and instalation of 1 HP water motor crompton/ kalsi/ kirloskar/havells make

M/S PAWAN KUMAR CONTRACTOR

GOPAL SINGH