REPAIR / REPLACEMENT AND PERIODICAL AND OTHER ALLIED WORKS AT SFC UNITS UNDER AGE B/R (S) NO-II GE (SOUTH) SECUNDERABAD

Amount

Demolation of Brick or stone masonry built in cement mortar complete all as specified and as directed

M & L for for brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius complete all as specified and as directed

Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in internal and external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and as directed

M & L for for 15 mm thick rendering in Cement Mortar (1:4) on fair faces of Brick works or Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed incl scaffolding if necessary. ( Note : Patch work upto height 7.50m incl necessary scaffolding).

M & L for for rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed Note : Patch work upto height 7.50m incl necessary scaffolding.

M & L for for 10 mm thick rendering in Cement Mortar 1:3 on fair faces of Brick works or Concrete surfaces in ceilings and finishing even and smooth without using extra cement. complete all as specified and as directed. Note : Roof projection/sun shade portion upto ht 7.50m incl necessary scaffolding

M & L for Preparation of newly plastered surfaces of wall and applying two coat of Distemper over a coat of cement primer complete all as specified and as directed

M & L for Preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of cement primer complete all as specified and as directed

M&L for applying three coats of white wash on ceiling cement primer including preparation of new plastered ceiling surfaces complete all as specified and as directedand as directed.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of white wash on ceiling surfaces.complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on walls. complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of oil bound distemper on ceilings. complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Preparation of plastered or unplastered old decorated surfaces and applying one coat of colour wash on walls. complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Preparation of plastered or unplastered old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and as directedand as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L complete removal of existing treatment and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directedand as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L Removal of existing treatment on walls and applying two coats of Altek superfine putty over one coat of altek primer to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper of any tint complete all as specified and as directed. NOTE : Will be done by roller only, after complete removal of old loose flakes.

M&L One coat of sythetic enamel paint on old wooden surfaces of any description, not other wise described, over 10 cm width or grith including preparation of surfaces. complete all as specified and as directed.

M&L One coat of synthetic enamel paint on old steel & iron surface of any description, not other wise described, over 10 cm width or grith including preparation of surfaces. complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets. complete all as specified and as directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip.complete all as specified and as directed

M&L for Providing and fixing Non asbestos designer E-Board 4mm thick in ceiling fixed to snap grid as per manufacturers instructions complete all as specified and as directed

Demolition of cement concrete in roof including existing roof treatement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg complete all as specified and as directed..

M & L for for 25 mm average thick PCC (1:2:4) Type B0 by using 12.50 mm graded crushed stone aggregate as in roof where required over slabs and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.

M&L for removal of old treatment of any description and removing the debris roughening the surfaces of old concrete roof surfaces by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and as directed.

M & L for 10mm thick rendering in CM 1:4 using water proofing compound at the rate of 2% of the total weight of cement or as [er manufacturer's instructions over concrete surfaces complete all as specified and as directed. ( Note : WPC measured and paid separately) under the relevant item

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application over apply bitumen base aluminium paint @ 0.20 Kg/Sqm complete all as specified and as directed

Supply only water proofing compound complete all as specified and as directed

M & L for cutting grooves in brick wall/roof slab of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed.

Taking down chowkat with frame (without taking off shutter from the frame) n exc 1.50 Sqm each complete all as specified and as directed

All as per item No 30 above but area exc 1.5 Sqm n.exc 4 Sqm each complete complete all as specified and as directed

Taking down shutter of any description not exc 1 Sqm each complete all as specified and as directed

Taking down shutter of any description exc 1 Sqm & n exc 2 Sqm each complete all as specified and as directed

M & L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing complete all as specified and as directed

M & L for for 2nd class hard wood Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F in frame at siteFactory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, as per specification & drawing

S&F for 35mm thick factory made plain framed panelled shutter of 2nd class HW (any Number of panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm th venered particle board with veneering on both face kiln seasoned & chemically treated complete all as specified and as directed

S & F 35mm thick 2nd class hard wood glazed skeleton shutters open rebated and prepared to receive glass and divided into square with plain, rounded, chamfered, mitred and rebated sash bars.complete all as specified and as directed

S & F 30 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type oon both side complete all as specified and as directed.

S & F 100mm long Stainless steel butt hinges with galvanised aluminium pin.complete all as specified and as directed

S & F 100mm butt hinges medium weight cold rolled mild steel complete all as specified and as directed

S & F Aluminium handle 150mm fabricated type complete all as specified and as directed

S & F Aluminium anodised barrel tower bolts 150mm of extrded section complete all as specified and as directed

S & F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed

S&F 300 mm long helical door springs including roller plate complete all as specified and as directed

S& F for 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed

S & F Aluminium powder coated frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and as directed

S & F Aluminium powder coated door/window/vent shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified and as directed

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as specified and as directed

S&F pre-laminated particle board (12mm thick) Interior grade pre-laminated both side with decorative choice laminations fixed in alluminium door or frame work with screws or necessary fittings complete all as specified and as directed

S & F galvanized mild steel wire cloth 0.56mm nominal dia of wire with avg 1.18mm width of aperture and fixed with tinned tacks. complete all as specified and as directed

All as per item No 52 above but fixed in repairs complete all as specified and as directed.

S &F for framed work such as grills, grating etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars (for windows), barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to Fe 290. Gde E-165 complete all as specified and as directed

Hacking out old broken glass any description & size from wooden/steel window and removal of rubbish from work site as directed.

S & F 3mm th sheet glass ordinary quality and fixed with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed

S & F 3mm th figured glass ordinary quality and fixed with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and as directed.

S&F in repairs 19mm thick block board grade 2 quality, interior grade, commercial type on both faces fixed as in shutter/shelves of cup boards etc complete all as specified and as directed

S&F in repair door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

M & L for for preparation of new wooden surface and applying two coats of synthetic enamel paint over one coat of pink primer over 10cm width or girth complete complete all as specified and as directed

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified and as directed

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified and as directed

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm or 450 x 300x 7mm , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick plaster on wall in cement mortar 1:4 complete all as specified and as directed

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exc 0.06 and not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm screed bed in cement mortar 1:6 complete all as specified and as directed

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and as directed

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl renderering 10mm thick for laying floor finishes in CM 1:4.mm complete all as specified and as directed

Demolition of stone slabs of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar complete all as specified and as directed

S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs(cylindlerical vertical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks. complete all as specified and as directed

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified and as directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified and as directed

S&F 15mm bore Bib taps, castcopper alloy withcrutch or butterfly handle, screweddown, screwed foriron pipe or for brass ferrule and fixedin repairs complete all as specified and as directed

S&F in repair pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not other wise provided for. complete all as specified and as directed.

Taking down PVC pipes of any description any pattern incl all fittings heads, shoes bends etc complete all as specified and as directed

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S&F PVC (SWR) pipes of 75mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed

S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia any radius with access door complete all as specified and as directed

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and as directed

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and as directed

S&Fin repair WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,out let pipe ,coupling ,connection pipe and CP piller taps complete all as specified and as directed

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete all as specified and as directed

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete all as specified and as directed

M & L for for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed

S&F in repairs stop cock 15mm dia fancy type chromium plated screwed high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed

S&F Chromium plated shower rose, with or without swivel of any size including fixing to steel pipe fixing in repairs complete all as specified and as directed

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed

S&F in repair two way bib cock/tap 15 mm chromium plated complete fancy type of brandedcomplete all as specified and as directed

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622mm(Make: Prayag) complete all as specified and as directed

S & F in repair Towel bar cromium plated incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F450024)

S & F in repair Wall Mixture cromium plated incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F320011)

S & F in repair Towel ring icromium platedncl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F890004)

S & F in repair Paper Holder with cover cromium plated incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F840009)

S & F in repair Single lever Basin Mixer w/o Popup Waste cromium plated incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F400009)

S & F in repair Bip cock with wall flange cromium platedincl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : F400002)

S & F in repair EWC of size 69 x 36 x 64 cm incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : 92520 S-30)

S & F in repair Wash Basin size 61 x 51 x 82 cm with Pedestal Complete set incl all fitting & fixtures complete all as specified and as directed (Make : Hindware Cat no : 11032)

S&F 25mm Stainless steel curtain rods incl required nos of brackets complete all as sepcified and directed

M/S C MALLIAH & SONS (BID ID -3283830)

M/S M AJAY KUMAR (BID ID -3284115)

abhilasha constructions (BID ID -3283269)

KIRAN CONSTRUCTIONS (BID ID -3284631)

S.R.M.K Enterprises (BID ID -3284715)

GADUSU RAMESH CONTRACTOR (BID ID -3284659)

K LAKSHMAN SINGH AND CO (BID ID -3283819)

BSA INFRA (BID ID -3284854)

M/S SARASWATHI CONSTRUCTIONS (BID ID -3283948)