REPAIR/REPLACEMENT OF HARD STANDING, RETAINING WALL, RAILING, DRAIN AND OTHER MISC WORKS IN THE AREA UNDER AGE B/R-II UNDER GE JUTOGH

Amount

Demolition of cement concrete in ground floors or pavings not exceeding 15cm thickness below or above ground level complete all as specified and directed.

M & L for 40 mm thick Cement concrete 1:2:4, type B-1, as in flooring finished even and smooth with extra cement complete all as specified and directed.

Forming contraction (dummy ) joint 65mm deep x 10mm wide filling with sealing compound grade 'A' complete all as specified and directed.

Dismantling floor, hearth or wall tiling etc including cement mortar bedding, removing serviceable tiles to stores and rubbish off the premises tiles complete all as specified and directed.

M & L for chequered cement concrete tiles glossy finish pre polished 30cmx30cmx22-25mm thick, set ,jointed and pointed in neat cement slurry with grey cement and pigment in floors.complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate as in subbase of flooring complete all as specified and directed.

Demolition of stone slabs and tiles laid dry of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for precast interlocking paver block glossy finish of any size and shape confirming to IS 15658-2006 of 80mm thick M-40 Grade with grey cement and pigment set over sand cushioning as required as directed and specified by Engineer in charge

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor tiles complete all as specified and directed.

M&L for 20mm thick granite (of any type ) work table rubbed and polished ) in platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Removing demolished/excavated material /soil .n exc 50m depositing were directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M & L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

M & L for Framed work such as grills, gratings, gates etc. ornamental and intricate design with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and directed.

M&L cement concrete 1:2:4, type B-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete etc. complete all as specified and directed.

S & F rolled section as in framing for cladding, glazing and the like fixed with angle/Rectangular or Square pipe cleats and connecting plates etc of Gde Fe-410-W (Gde-E250 quality-A complete for sheet fixing complete all as specified and directed.

S&F in repairs 5 mm thick plain Poly carbonate translucent sheeting fixed with self tapping screw incl dismantling complete all as specified and directed .

M & L for preparation of new steel surface of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of brickwork/stone boulders, masonary built in cement mortar incl all quoins, arches,pillars,etc. but excl ashlar facings, dressed stone works & precast concrete surfaces complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan built in CM 1:4 complete all as specified and directed.

M & L for cement concrete 1:2:4, type B-1, using 20 mm graded crushed stone aggregate in surface channels and drains etc complete.including cement concrete surface even and smooth

M&L for stone walling of random rubble stone masonary, uncoursed, well bonded, bedded & solidly hearted built in cement mortar (1:6) using locally available best stone complete all as specified and directed

Ditto all as per above item but except stone (stone shall be obtained from demolition all as directed by EIC)

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, insert in retaining wall etc complete all as specified.

M&L precast PCC 1:3:6 type C1 using 20 mm graded stone aggregate as bonder stones set in cement mortar 1:6,complete all as specified.

M&L PCC 1:2:4, type B-1, using 20 mm graded crushed stone aggregate as in coping to retaining walls/ steps/ parapet/ base of railing post etc., including necessary formwork complete all as specified and directed.

M&L flush pointing to RR stone masonary un coursed in CM (1:4) complete all as specified and directed.

M & L raised pointing to random or polygonal rubble, uncoursed or brought upto coarse in CM (1:4) including raking out existing pointing etc complete.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc.all as specified & directed.

M & L plastering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) to be finished even and smooth (without using extra lime or cement) all as specified.

M&L for prepartion of newly plastered surface of wall applying two coats of weather proof paint on external surfaces including a coat of alkali resistant priming paint complete all as specified.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L reinforced cement concrete type A-1, 1:1.5:3 as in columns/beams/slab, landings and in shelves and the like complete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs, roof slabs, landings and similar work complete all as specified and directed.

S&F TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally hooking end and binding with MS wire annealed not less than 0.9mm dia complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground (embedded in concrete, brick work, masonary etc) complete all as specified and directed.

Dismantling fencing wiremesh, any type complete all as specified and directed.

M&L for mild steel works for hand rails, stairs/steps, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flats iron fillets (for securing wire mesh etc ) similar work complete all as specified and directed.

M&L for fixing only retrieved fencing post including cleaning for refixing and , drilling holes, notching for wire etc flats iron fillets (for securing wire mesh etc ) similar work complete all as specified and directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the othe other , or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut n exc 10 cm long dia of neck 5 to 10mm complete all as specified and directed.

S&F Mild steel round bars 10 mm dia and over, cut to length, bent to shape required incl hooking ends, fixed horizontaly in wire mess to hold it straight, tightened at post/ struts, conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F chain link MS galvanised fencing wire mesh of size and dia as ordered, fixed to posts and struts with bolts or screws complete all as specified and directed. Note: Size and dia of wire mesh will be decided by GE

S&F in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails bolts, including securing or tying at crossings with and provision of gavanised mild steel wire, staples or steel pins, etc complete all as specified and directed.

M&L for preparing old painted steel & iron surfaces of any description over 10 cm in width or girth, including roof and applying one coat of white/ approved colour/ shade synthetic enamel paint complete all as specified and directed.

M/S J.S.ENTERPRISES

PRITPAL SINGH

M/S Jaswant Kumar Aggarwal

Pankaj Builders

M/S Meera Builders