Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.9 LAccepted-AOC 36 137 THANGAMAPURIPATTINAM METTUR DAM 636 402 | SALEM | TAMIL NADU | 636402 | ₹1.9 L Quoted ₹1.8 L | L1 | Accepted-AOC L1 |
| Sl No | Description | Qty | Unit | SRI V M A ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | Charges for disconnection of power cable, Decoupling the motor from pump and checking alignment | 1 | Nos | 3,990 ₹3,990 Lowest |
| 2.00 | Charges for removal of foundation bolts, lifting the motor to a convenient location. | 1 | Nos | 4,919 ₹4,919 Lowest |
| 3.00 | Charges for dismantling of motor side pulley cooler and end covers and threading out the rotor. | 1 | Nos | 9,439 ₹9,439 Lowest |
| 4.00 | Charges for cleaning and checking of cooler tubes. | 1 | Nos | 4,975 ₹4,975 Lowest |
| 5.00 | OVERHAULING OF STATOR: Charges for inspection, cleaning of stator & its winding, fastening of the winding to the end ring & the inner coil spacers and packing in the overhang portion of the winding. Tightening of the wedges, spraying one coat of Dr.Beck’s varnish and drying out, Stator preheating, checking the IR Value and DC resistance | 1 | Nos | 18,311 ₹18,311 Lowest |
| 6.00 | OVERHAULING OF ROTOR: Charges for inspection, cleaning of rotor, Cleaning of rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, soldered end winding, cleaning of overheated burnt places and applying two coats of Dr.Beck’s protective enamel and drying out . | 1 | Nos | 4,445 ₹4,445 Lowest |
| 7.00 | Charges for Releasing the bearing, cleaning, checking and reassembling/ replacing the bearing on both ends lubrication etc. (bearings supplied by Contractor). | 1 | Nos | 8,891 ₹8,891 Lowest |
| 8.00 | Charges for Assembling the motor after threading in the rotor and fixing end covers. Providing rubber gasket and fixing the cooler unit, Checking the IR value, DC resistance and Tan Delta. | 1 | Nos | 14,158 ₹14,158 Lowest |
| 9.00 | Charges for Lifting the motor, Placing at motor bed and tightening of foundation bolts, bed bolt etc. | 1 | Nos | 4,919 ₹4,919 Lowest |
| 10.00 | Charges for termination of power cable, coupling the motor with pump, checking alignment and trial run | 1 | Nos | 4,919 ₹4,919 Lowest |
Tender Value
Refer Docs
EMD Value
₹1,700
Closing Date
22 Sept 2025, 2:00 pmClosed
CHIEF ENGINEER/MTPS-I
CHIEF ENGINEER MTPS-I METTUR DAM
MTPSI ES Circle EMI SDIV RWPH Complete Overhaul of 320KW 6.6KV, Vertical mounted HT Motor -I Sl.No 3840604 1 in Raw Water Pump House MTPS-I during the year 2025
2025_EB_600995_1
CE-MTPSI-SE-ES-EM-I-OT72-25-26
Open Tender
Electrical Works
Works
15 days
MTPS-I/METTURDAM
AS PER TENDER SPECIFICATION
4 documents required · 4 mandatory
₹0
₹1,700
Yes
16 Jul 2026
6 Sept 2025
23 Sept 2025
6 Sept 2025
22 Sept 2025
6 Sept 2025
Amount
Charges for disconnection of power cable, Decoupling the motor from pump and checking alignment
Charges for removal of foundation bolts, lifting the motor to a convenient location.
Charges for dismantling of motor side pulley cooler and end covers and threading out the rotor.
Charges for cleaning and checking of cooler tubes.
OVERHAULING OF STATOR: Charges for inspection, cleaning of stator & its winding, fastening of the winding to the end ring & the inner coil spacers and packing in the overhang portion of the winding. Tightening of the wedges, spraying one coat of Dr.Beck’s varnish and drying out, Stator preheating, checking the IR Value and DC resistance
OVERHAULING OF ROTOR: Charges for inspection, cleaning of rotor, Cleaning of rotor, checking the position of stampings, cleaning of corroded parts, inspection of winding bars, soldered end winding, cleaning of overheated burnt places and applying two coats of Dr.Beck’s protective enamel and drying out .
Charges for Releasing the bearing, cleaning, checking and reassembling/ replacing the bearing on both ends lubrication etc. (bearings supplied by Contractor).
Charges for Assembling the motor after threading in the rotor and fixing end covers. Providing rubber gasket and fixing the cooler unit, Checking the IR value, DC resistance and Tan Delta.
Charges for Lifting the motor, Placing at motor bed and tightening of foundation bolts, bed bolt etc.
Charges for termination of power cable, coupling the motor with pump, checking alignment and trial run
Charges for painting the motor complete surface and fan blade with 2 coats of standard Grey enamel paint (Area of 1 No. RWP HT Motor-25 M2)
NU 324 Cylindrical Roller Bearing ( Brass Cage)Make : FAG
7320 BPM Ball Bearing ( Angular con ) ( Brass Cage) Make : FAG
Standard Grey enamel paint
Dr. Beck’ varnish (for 1 No. HT motor- 1.5 Kg)
Thinner
Cost of consumables
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].