Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.4 LAccepted-AOC 46 HUSENI LAKDA BAZAAR 242 BELLASIS ROAD MUMBAI 400008 | MUMBAI | MAHARASHTRA | 400008 | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.5 L+₹2.1 L (12.5%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L2 | Rejected-Finance Not Reasonable | |
| 3 | L3₹20.0 L+₹3.6 L (21.7%)Rejected-Finance | L3 | Rejected-Finance Not Reasonable | |
| 4 | L4₹28.7 L+₹12.3 L (74.7%)Rejected-Finance | L4 | Rejected-Finance Not Reasonable | |
| 5 | Rejected-Technical | - | Rejected-Technical DUE TO FIRM SLOW PROG AS PER CEPZ WLR SER NO 17. |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
4 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh Saurabh Gupta, EE
GE(W) Colaba, Mumbai
REPAIRs to JCOs/ORs MD ACCN AND OTM BLDGS FURNITURE AT BSO (W) UNDER GE(W) COLABA MUMBAI
2023_MES_631638_1
8830/E8
Open Tender
Civil Works
Item Rate
180 days
GE(W) Colaba
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE(W) Colaba, Mumbai
₹79,000
Yes
5 Feb 2024
7 Dec 2023
6 Jan 2024
7 Dec 2023
4 Jan 2024
22 Dec 2023
Amount
Following existing unserviceable parts of furniture shall be removed and replaced /repaired /carriy out carefully without disturbing the adjoining parts including tightening, screwing, welding, glueing, nailing wherever applicable and Work will be executed where the furniture exists in different users Md accns and OTM Bldg under jurisdiction of GE(W) Colaba Mil Stn including BSO furniture yard as directed.
M&L for removeal of old unserviceable wooden parts of the following furniture articles and S&F New seasoned teak wood part with exact dimensions as specified and shown on drgs and directed by Engg-in-Charge.
Teapoy Verandah FD-255
Removal of unserviceable / broken Top of the table and S&F New top of size 900mm x450mm made up of 18mm thick plywood BWR Grade of Make : Archid Ply/ Green Ply/ Century ply and laminated sheet of approved shade of Make: Archid Ply/Kit Ply/ century ply with 4mm with teak wood bidding with semi round shape all round the top of teapoy.
M&L for Spot welding to broken steel parts of Teapoy Verandah all as specified and directed.
Removing existing unserviceble rubber shoes and replace with 25mm dia hard rubber shoes for legs all as specified and directed. Make: AMK/polyton
M&L for Preparation of old painted steel surface of the Teapoy Verandah by removing all dents, filling with putty and spray painting with 2 coats of white synthetic enamel paint all as specified and directed. Make: Berger/ Asian/ Shalimar paints all as specified and directed by Engr-in-Charge
Shoe Rack Steel (FD/E6/MAD/02 ( R )
M&L for Spot welding to broken joints/parts all as specified and directed.
Removal of old broken jali with frame and S&F new one made up of size 700mmx300mm of 20mm dia MS pipe with 03 mm dia rod of 700mm long and 300mm long duly welded as shown in drg and directed.
Removing existing unserviceble Hard rubber shoes and S&F with new one of size 25 to 30 mm dia of make : AMK/Polyton all as shown on drg.
M&L for Preparation of old painted steel surfaces of the Shoe rack by removing all dents, filling with putty and spray painting with 2 coats of Black synthetic enamel paint of Make: Berger/ Asian/ Shalimar paints all as specified in drg and directed by Engr-in-Charge
Table Computer FD/E6/MAP/03
Removing of unserviceable top and S&F new top of size 560mm x 900mm shall be made up of 18mm thick ply wood BWR Gde of Make : Century ply/ Green ply/ Archid Ply with both side laminated with laminated sheet of Make: Century ply/ Green ply/ Archid Ply of approved colour /Shade as directed by GE/Engg-in-Charge with polished 4 mm thick teak wood beading all round the top.
Removing unsrviceable key board tray and Supply and fixing new key board tray of size 450mmx425mm shall be fixed on 14-18 inch telescopic channel. Telescopic channels of Make : Hettich/ Kaff shall be provided.
All as per item No 10 here-in-before but side panels of size150mm x 657mm.
All as per item No 10 here-in-before but Bottom shelf of size 300mm x 700mm.
All as per item No 10 here-in-before but middle shelf of size 300mm x 450mm.
M&L for removal of old broken Telescopic channels of drawer and S&F new one of 14-18 inch Make : Hettich/ Kaff shall be provided. Rest all as shown in drg.
Removing unserviceable lock of drawer and supply and fixing new lock suitable for drawer with duplicate key of Make: Mortice/Harrison/ Link all as shown on drawing and directed by Engg-in-Charge.
M&L for painting of all steel surfaces by coating black paint of Make: Berger/ Asian/ Shalimar after rusting/ grinding the steel surfaces of computer table.
M&L for removal of Nylon buffers and supply & fixing of new buffers of 35mm dia to legs as specified in drawing.
Stool wooden cushioned frame FD- FD-374, /Map/ Similar patern
Stiffner teakwood
front/rear/left/right sheet ply
Top for stool dressing wooden w/c plywood of 12/18mm Make Archid /Green Ply And Century Ply with 4mm prelaminated sheet (Sunmica)
Removing of old tapestry cloth and cushion and providing /fixing of new tapstery cloth and cushion of 32 density of make kurl, sleepwell, pooja
Removing of unserviceable hard rubber toes/ring from the bottom of legs and providing new rings of 4 Nos each.
French polishing to the repaired Stool Dressing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.
Stool Dressing
Removing of unserviceable/ broken top long rail from frame of stool dressing and providing/fixing new long rail made out of 1st class hardwood teakwood rails including drilling of cane holes @ 12.5mm c/c. The loose joints tightened and glued with suitable bamboo pins & duly french polishing stool dressing completely all as specified and shown on drg
Removing of unserviceable/ broken top short rail from frame of stool dressing and providing/fixing new short rail made out of 1st class hardwood teakwood including drilling of cane holes @ 12.5mm c/c. The loose joints tightened and glued with suitable bamboo pins and duly french polishing stool dressing all as specified and shown on drg.
Removing of unserviceable/ broken leg from frame of stool dressing and providing/fixing new leg made out of 1st class hardwood teakwood and duly french polishing stool dressing all as specified and shown on drg.
Removing of unserviceable/broken stiffner from frame of stool dressing and providing/fixing new stiffner made out of 1st class hardwood teakwood and duly french polishing stool dressing all as specified and shown on drg.
Removing of unserviceable hard rubber toes/ring from the bottom of legs and providing new rings of 4 Nos each.
French polishing to the repaired Stool Dressing in two coats after preperation of surfaces all as specified on drawing or as directed by Engineer-in-charge.
Chair CBB steel /similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg. All as directed.
Stiffner set of three
Front left/right Leg
Rear left/right Leg
Upper/lower stiffner of Back support
bracket of teak wood
Front/rear/Left/right rail of seat
Removing of unserviceable hard rubber toes/ring from the bottom of legs and providing new rings of 4 Nos each.
French polishing to the repaired Stool Dressing in two coats after preperation of surfaces all as specified and directed by Engineer-in-charge.
Charpoy IP folding FD No
M&L for removal of unserviceable ply wood from charpoy IP folding with hard top and supply and fixing with new 8 mm thick BWR Grade plywood as per IS-303 approved specification of size 1980mmx900mm cut in two pieces (ie two equal pieces shall be of size 990mmx450mm) of Make: Archid Ply/ Century Ply/ Green ply with counter sunk nuts and bolts 6mm dia 35mm long all as shown on drg and directed by Engr-in-Charge.
M&L for removal of Unserviceable hard rubber shoe from charpoy IP folding with hard top and supply and fix new one of best quality as approved by Engg-in-charge and all as shown on drg.
M&L for preparation of old painted steel surface of the charpoy IP folding with hard top by removing all dents, grinding, rusting and filling with putty and apply spray painting to entire charpoy with 2 coats of black synthetic enamel paint of Make: Berger/ Shalimar/ Asian. Metal primer shall be applied wherever required, all as specified and directed by Engr-in-Charge.
Charpoy GI Pipe with /without FMN Set
S&F 02 Nos cleats of iron angle of size 25mmx25mmx5mm, 50mm long on each long rails and 02 Nos cleats on each short rails duly running welding on approprite position as directed by Engr-in-Charge including drilling hole in each cleats duly painted with synthetic enameled paint black colour over a coat of red oxide primer.
M&L for removal of old broken/ unsv plywood of charpoy GI pipe and supply & fix new 12 mm thick BWR grade ply of size 1980mmx900mm as per IS-303 approved specification of Make: Archid Ply/ Century Ply/ Green ply on cleats welded on rails provided with nut & bolts with washer including providing 02 Nos new Flat iron strip of size 900mmx30mmx5mm thick duly welded on two long rails togather on appropriate position of charpoy. Flat Iron strip shall be painted with synthetic enameled paint in black colour over a coat of red oxided primer. Corners of plywood top should be rounded off properly before fixing on charpoy all as specified and shown on drg and directed by Engineer - in -Charge.
M&L for removal of old broken/ rusted /unsv / partly serviceable long rail from existing frame of charpoy GI pipe and supply and fixing of new long rail 1980mm long made out of GI pipe 32mm nominal bore medium grade ISI marked of Make: TATA/ JINDAL/ZINITH duly threaded on both sides all as specified and shown on drg.
M&L for removal of old broken/ rusted /unsv /partly serviceable short rail from exiting frame of charpoy GI pipe and fixing of short rail 900mm long made out of serviceable part of long rail retrieved from charpoy GI pipe against Ser No. 8.03 above duly cutting, threading on both ends all as specified and shown on drawing.
M&L for removal of old broken/ rusted /unsv leg from existing frame of charpoy GI pipe and fixing of legs 440mm long made out of serviceable parts of long rail/Short rail retrieved from charpoy GI pipe against item No. 8.03 & 8.04 here-in-before duly cutting, threading complete all as specified and shown on drawing.
M&L for removal of old broken/unsv GI elbow three way from existing frame of Charpoy GI pipe and supply and fix new elbow GI three way 32mm bore medium grade Make: Unik/Jupiter metal complete ISI marked all specified and shown on drawing.
M&L for removal of broken/ unsv check nuts from existing frame of charpoy GI pipe supply and fixing new check nuts GI 32mm bore medium grade ISI marked Make: Unik/Jupiter Metal all specified and shown on drawing.
M&L for tightening of charpoy GI frame complete all as per drawing and Preparation of old iron surface of Charpoy GI pipe by scraping/ rubbing and apply spray painting to entire GI frame with 2 coats of synthetic enamel paint of silver shade of make : Berger/Shalimer/nerolac/ Asian complete as directed by Engr-in-chage.
Table 3'x3' steel FD-1009/similar patern. Removing the existing unserviceable part and S&F following similar new part as per Drg
Hard Top sheet
Rubber shoe
Stiffner
Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE(W) Colaba
M&L for running welding (not exc 25mm each) of steel items including scraping preparing surface of welded portion by grinding.
Table 5’x2’-18"/10” /similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg
hard Table top
Top/Bottom long Stiffner
top/Bottom short Stiffner
Rubber shoe
Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE(W) Colaba
Table dining ORs steel FD-165/similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg
Hard Top sheet
Top/Bottom long Stiffner
top/Bottom short Stiffner
Rubber shoe
Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE(W) Colaba
M&L for running welding (not exc 25mm each) of steel items includung scraping preparing surface of welded portion by grinding .
Form without back (steel frame) FD-77/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg
Seat plank complete with french polish
Centre support Stiffners complete
Top/bottom short stiffner
Rubber shoe
Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling all cavity with putty, painting for repaired and existing good furniture at furniture yard/Md/OTM buildings under GE(W) Colaba
M&L for running welding (not exc 25mm each) of steel items including scraping preparing surface of welded portion by grinding.
Locker Steel with four shelf : DRG NO FD-1029
Removing the unserviceable legs and S&F new leg in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Removing the unserviceable shelf and S&F new shelf in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Removing the unserviceable cleat for shelf and S&F new cleat for shelf in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Removing the unserviceable conduit pipe and S&F new conduit pipe in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Removing the unserviceable handle and S&F new handle in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Removing the unserviceable hasp and staple and S&F new hasp and staple in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Preparing old steel surfaces and applying one coat of synthetic enamel olive green shade with spray machine (internal & external) in the furniture (locker steel) as per drawing No FD-1029 all as specifed and directed.
Chair Verandah FD-359/ similar pattern. Removing the existing unserviceable part and S&F following similar new part as per Drg /MAP
Leg tube conduit complete
Seat/back short tube conduit
Seat/back long tube conduit
Horizontal rod below seat
Rubber shoe
Arm rest
Plastic white cane canning of seat
Plastic white cane canning of back
Preparation/ cleaning of existing decorated surface/ rubbing by emery paper, removing all spots, filling with putty, painting for repaired and existing good furniture as directed at site FD-359 at furniture yard/Md/OTM buildings under GE(W) Colaba
M&L for running welding (not exc 25mm each) of steel items including scraping preparing surface of welded portion by grinding.
Chair Dining JCOs /Ors
All as per Item Sl No. 1.01 above for Font Legs of Chair Dining
All as per Item Sl No. 1.01 above for rear Legs of Chair Dining
All as per Item Sl No. 1.01 above for side rails of Chair Dining
All as per Item Sl No. 1.01 above for front rails of Chair Dining
All as per Item Sl No. 1.01 above for back rails of Chair Dining
All as per Item Sl No. 1.01 above for back rest of Chair Dining
All as per Item Sl No. 1.01 above for bottom stiffner of Chair Dining
M&L for Remove old unserviceablev PVC shoes and S&F New PVC shoes of best quality with 1/2" screw to the bottom of legs of Chair dining.
M&L for Removing Old unserviceable Cane From Chair dining and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Perimeter work; Make shall be Shah/Premier in white colour all as Specified and directed by Eng-in Charge.
Mahesh Traders
M/s REETA ENTERPRISES
BALAJISTEELINDUSTRIES
Bidder Name
Unitech Enterprises
BALAJISTEELINDUSTRIES
Mahesh Traders
M/s REETA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .