Carryout the Renovation works in TNCSC godown campuses at Thiruvanmiyur, Gopalapuram and Nandanam in Chennai South Region

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC Godown campus at Nandanam in Chennai District. Dismantling and Clearing away AC sheet Roofing without timers and carefully stacking materials useful for reuse as directed by the departmental officers.

Dismantling clearing away and carefully stacking materials useful for re-use Brick/stone masonry in cement mortar under 3m height

BRICK WORK in cement mortor 1:5 (one cement, five Msand) using best quality second class chamber burnt bricks/ Fly ash bricks of size 9"x4 3/8"x2 3/4"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed.

Supplying and fixing Galvalume sheet roofing with 0.47 mm thick of fully corrugated of approved colour and quality by drilling holes (and not by punching) with necessary ‘J’ / ‘U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc., complete complying with standard specification and as directed.

Supplying and roofing of precoated iron profile sheet ridge pieces of approved quality in size 2.40m x 0.60m of 0.47 mm thick with necessary U or J bolts and nuts GI washers etc., complete complying with standard specification

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length. Roofing

Supplying fabricating and fixing ISI structural steel materials for truss, purlin, stanchion post including cutting drilling holes and welding including painting two coats of good quality I class synthetic enamel paint over one coat of oxide primer etc. complete (If the required structural steel members supplied at site by the Corporation the cost will be recovered at the issue rate) as directed by Corporation officers.

PLASTERING with cement mortor 1:5 (one cement and five Msand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed Roofing

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Carryout the Renovation works in TNCSC Godown campus at Gopalapuram in Chennai District. Dismantling and Clearing away AC sheet Roofing without timers - and carefully stacking materials useful for reuse as directed by the departmental officers.

Dismantling clearing away and carefully stacking materials useful for re-use Brick/stone masonry in cement mortar under 3m height

Dismantling and clearing away and carefully stacking materials for re-use Reinforced cement concrete using deploying machineries.

Dismantling and clearing away and carefully stacking materials for re-use plaint cement concrete

Dismantling and clearing away and carefully stacking materials for re-use floor finish and dadooing walls in cement mortar with mosaic tiles, glazed tiles and cuddpah slab.

BRICK WORK in cement mortor 1:5 (one cement, five Msand) using best quality second class chamber burnt bricks/ Fly ash bricks of size 9"x4 3/8"x2 3/4"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. Ground floor

Supplying and laying of High profile colour galvalume sheet with combination 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site) Roofing

Supplying and laying of High profile colour galvalume sheet ridges 55A1:43 4Zn:1:6SI of TCT bent type 0.47mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile/ CR sheets of approved quality for roofing with necessary fixing arrangements like 65m abd long hexagonal head screws with EPDM rubber seal etc., complete, complying with standard specification and as directed by the departmental officer. (Test certificate for quality should be furnished on receipt of material at site) (Replacing new one)

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of neccesary G.I screw, Rubber, Aluminium whaser with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete for 42m length.

Supplying fabricating and fixing ISI structural steel materials for truss, purlin, stanchion post including cutting drilling holes and welding including painting two coats of good quality I class synthetic enamel paint over one coat of oxide primer etc. complete (If the required structural steel members supplied at site by the Corporation the cost will be recovered at the issue rate) as directed by Corporation officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement , five M sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Cement Concrete 1:2:4(one cement,two Msand and four aggregate) using 20mm gauge hard broken granite stone jelly including dewatering, side shuttering, strutting, wherever necessary including curing etc., complete complying with standard specification and as directed.

FLOOR FINISHING with fine polished cuddapah slab over a coat of bitumen at the rate of 17 kg /10 sq. meter over base concrete and laid over cement mortar 1:4(one cement and four sand) of 20mm thick including pointing the semi polished cuddapah slab with cement mortar 1:3 to full depth and directed. The semi polished cuddapah slab shall be of size 60cm x 45cm for a thickness of 40mm machine cutting on all sides and top surface semi-polished. The Tolerance for thickness shall not exceed + 10%(Rate includes cost of all materials).

Reinforcement Cement Concrete 1:1 1/2 :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. Foundation basement

PLASTERING with cement mortor 1:3 (one cement and threeM sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed..

Paving the flooring with Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works).

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.- Ladies Toilet

Supplying, and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work.- - Ladies Toilet Bend110mm

Elboow 110mm

Supplying, and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. 25mm PVC pipe

Supplying and fixing in position the following PVC specials of heavy duty of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete. 25mm PVC Bend

Coupler 25mm PVC pipe

Elbow 25mm PVC pipe

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications and quality including cost of shellac, thread, etc., complete as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Thiruvanmiyur in Chennai District. Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150 mm layers well watered, rammed and consolidated including depositing surplus earth within the godown or inside compound in places shown with initial lead of 10 mts and initial lift of 2 mts. clearing, levelling the site, shoring, strutting, bailing of water wherever necessary etc., complete complying with standard specificationand as directed.

Supplying and filling in basement with wetmix 250mm thick in layers of not exceeding 250mm thick, well watered, rammed and consolidated including machineries for hire and running charges leader 5 Cum capacity, hire charges for tipper, water sprinkler,` vibratory roller all labour charges etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement , five M sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

BRICK WORK in cement mortor 1:5 (one cement, five M sand) using best quality second class chamber burnt bricks/ Fly ash bricks of size 9"x4 3/8"x2 3/4"for walls including cost of scaffolding curing, finishing etc.,complete complying with standard specifications and as directed. For foundation and basement

PLASTERING with cement mortor 1:5 (one cement and five M sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and three M sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets of size 90cm x60cm 10gauge stiffened with welded mild steel angles of size 25mm x 25mm x 3mm laid with country wood joist of average of size 10cm x 6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporation officers. The rates should inclusive of cutting, bending, welding charges of M.S.sheets; M.S.angles etc complete complying with standard specification and as directed. For plinth beam, grade beam, vertical etc.,

Reinforcement Cement Concrete 1:1 1/2 :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed. For foundation and basement

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and fixing th 2hp jet pump to the existing borewell the cost includes conveyance and labour charges.

Providing cement concrete ring size 1.80 m dia ring for soak pit at required depth the charges including transport, labour charges, fixing and pointing etc.,

Supplying and fixing soak pit cover of size 1.80m dia of best approved quality including raising the elevated portion around the cover cement mortar 1:3 and plastered with 1:5 12mm thick etc., complete and as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Paving the flooring with Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick in all floors used 0.20 kg / m2 including finishing the joints and pointing flush with even surfaces etc., complete complying with standard specifications and as directed.. (The tiles should be got approved by the Executive engineer before use on works).

Fabricating, supplying and fixing in position of SOLID PVC DOORS with frames of sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multi chamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configuration of an “A” section for shutter frames and multi-chamber hollow plastic section of 200 mm 200 mm1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dismantling the masonry, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the departmental officers.

Supplying and fabricating and fixing in position of mild steel door with double shutters using M.S.angle of size 40x40x6mm for outer frames and 35x35x5mm for shutter frames, with bottom 1/3rd M.S Sheets of 18 gauge with M.S flate of size 32.x6for internal stiffners and top 2/3rd grilled including one number of aldrop, two numbers of tower bolts, hold fast , hinges, handle etc., including two coats synthetic enamel paint over one coat of primer. The rate shall inclusive of cost of all materials.

Supplying and fixing in position best quality PVC soil / waste pipes of 110mm dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings etc., complete as directed by the departmental officers.

Supplying and fixing in position the following PVC specials of heavy duty of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete. Bend

Elbow

Supplying, and fixing the following size of PVC pipes of approved quality and variety conforming to pressure IS 4985. The rate is inclusive of cost of pipe, all taxes, conveyance charges of materials and all other labour charges for fixing the PVC pipe as directed by the departmental officers etc., complete complying with standard specifications. The PVC pipe should be got approved by the departmental officers before use on work. 25mm pvc pipe 10kg

Supplying and fixing in position the following PVC specials of heavy duty of approved quality and good variety excluding fixing charges but including necessary cutting and threading of G.I.Pipes, jointing the G.I Specials etc complete. 25mm PVC Bend

25mm PVC Elbow

25mm PVC Tee

25mm PVC Coupler

Servicing the existing rolling shutter of size 1.80 x 2.60m such spring tension adjustment attending leaves repair works, locking adjustment, applying grease and kerosene wahsing for easy uplifting including cost of labour for removing and refixing the rolling shutter, cost of kerosene and grease etc., complete complying with standard specification and as directed by the departmental officers.

G Murali