ALUMINIUM PARTITIONS, FALSE CEILING WORKS WITH NECESSARY MS SUPPORTS STRUCTURES AT THE EXISTING RADOM HANGAR TO ACCOMMODATE VARIOUS OFFICE REQUIREMENTS PERTAINS TO KIRAN STRUCTURES ALONG WITH ALLIED CIVIL WORKS IN OVERHAUL DIVISION, HAL BC

HINDUSTAN AERONAUTICS LIMITED BANGALORE OVERHAUL DIVISION

NAME OF THE WORK: ALUMINIUM PARTITIONS, FALSE CEILING WORKS WITH NECESSARY MS SUPPORTS STRUCTURES AT THE EXISTING RADOM HANGAR TO ACCOMMODATE VARIOUS OFFICE REQUIREMENTS PERTAINS TO KIRAN STRUCTURES ALONG WITH ALLIED CIVIL WORKS IN OVERHAUL DIVISION, HAL (BC) (CIVIL & ELECTRICAL) CONTRACT NO. HAL/OVL/PM/TN/C-96/25-26

Name of the Contractor :

Sl. No. Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount

Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with relevant CPWD specifications amended upto date/ detailed technical specification in tender document and tender drawings if any.

I Civil Estimation: FOR ALUMINIUM PARTITIONS, FALSE CEILING WORKS WITH NECESSARY MS SUPPORTS STRUCTURES AT RADOM HANGER IN OVERHAUL DIVISION, HAL(BC).

A DISMANTLING AND DEMOLITION WORKS C D E F=C*E

1 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 80.00 Sqm 54.83 Rupees Fifty Four and Eighty Three Paise Only 4386.40 1397.43

B FALSE CEILING

2 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 1182.7

2.1 8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/ sq. cm, bending strength 100 kg/sq. cm , of size 595x595 mm, having perforation of dia. 10 mm with minimum perforated area 18 % with non woven tissue on the back side, having an NRC ( Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 kg /cum backing. 75.00 Sqm 1741.13 Rupees One Thousand Seven Hundred Forty One and Thirteen Paise Only 130584.75

C PAINTING WORKS

3 Applying priming coats with primer of approved brand and manufcature having VOC content. 13.85.3: With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre 160.00 Sqm 71.95 Rupees Seventy One and Ninety Five Paise Only 11512.00 597.72

4 Providing and applying white cement based wall care putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 160.00 Sqm 151.84 Rupees One Hundred Fifty One and Eighty Four Paise Only 24294.40 225.04

5 Wall painting Two coats with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. - 160.00 Sqm 138.94 Rupees One Hundred Thirty Eight and Ninety Four Paise Only 22230.40

6 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work. 95.00 Sqm 151.69 Rupees One Hundred Fifty One and Sixty Nine Paise Only 14410.55 1134.59

7 Painting two coats of LINOSOL HB CHLORO PAINt (SMOKE GREY ) paint of approved brand and manufacturer with a coat of Z/P primer over the concrete surface including the preparation of surface such as - removing all kind of deposits,dusts/other particles from the surface either by water jetting or by hard wire brushing ,filling of indentations or undulations for rectifying the iregularities by using suitable /appropriate floor putty/metal paste/trowelling compound applicatior making the surface fully clean before the application of paint. 700.00 Sqm 127.12 Rupees One Hundred Twenty Seven and Twelve Paise Only 88984.00

D STRUCTURAL STEEL WORKS:

8 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 1750.00 kgs 130.09 Rupees One Hundred Thirty and Nine Paise Only 227657.50 8794.75

E ALUMINIUM WORKS

9 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 433065.2

For Fixed Portion 11952.71

10 Anodized Aluminium (anodized tranparent or dyed to required shade (Min anodic coating of grafe AC 15) 325.00 kgs 481.68 Rupees Four Hundred Eighty One and Sixty Eight Paise Only 156546.00

11 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 9004.86

12 Anodised aluminium (anodised transparent or dyed to required shade , Minimum anodic coating of grade AC 15) 75.00 kgs 582.44 Rupees Five Hundred Eighty Two and Forty Four Paise Only 43683.00

13 Providing and fixing 12mm thick pre-laminated particle board (decorative lamination on one side and balancing lamination on other side)flat pressed three layer or graded wood particle board confirming to IS:12823 Grade I,type II,in panelling fixed in aluminium doors,windows,shutters and partition frames with C.P. brass/stainless steel screws etc.,complete as per architectural drawings and directions of Engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. 25.00 Sqm 1108.54 Rupees One Thousand One Hundred Eight and Fifty Four Paise Only 27713.50 86678.83

14 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm ) 40.00 Sqm 1464.61 Rupees One Thousand Four Hundred Sixty Four and Sixty One Paise Only 58584.40

15 Providing and fixing one number per track fly proof SS wire gauge to windows using SS wire gauge(grafe 304) with avergae width of aperture 1.4mm with wire dia 0.5mm all complete into the shutters of window frame as specified by the EIC/OIC. 5.00 Sqm 629.16 Rupees Six Hundred Twenty Nine and Sixteen Paise Only 3145.80 368415.16

F ALUMINIUM FITTINGS AND FIXTURES Kgs 1087.75

16 Providing and Fixing of alumnium sliding door bolts 300x16mm size ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 5.00 Nos 295.06 Rupees Two Hundred Ninety Five and Six Paise Only 1475.30 1101.18

17 Providing and Fixing alumnium tower bolts 250 x10mm size , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 5.00 Nos 112.04 Rupees One Hundred Twelve and Four Paise Only 560.20 179950.28

18 Providing and Fixing alumnium handles 125mm long , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 10.00 Nos 64.46 Rupees Sixty Four and Forty Six Paise Only 644.60 45068.63

19 Providing and Fixing alumnium hanging Single rubber floor door stopper , ISI marked ,ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) tranparent or dyed to required colour or shade with nits and screws etc 5.00 Nos 38.53 Rupees Thirty Eight and Fifty Three Paise Only 192.65

20 Providing and fixing bright finished brass 100mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 )alumnium lever handles of approed quality with necessary screws etc complete 5.00 Nos 845.49 Rupees Eight Hundred Forty Five and Forty Nine Paise Only 4227.45 8490.5

21 Providing and Fixing alumnium extruded section body tubular type universal hydralic door closer (having brand logo with ISI mark) embosed on the body ,door weight up to 36kgs to 80 kg and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc complete 5.00 Nos 956.60 Rupees Nine Hundred Fifty Six and Sixty Paise Only 4783.00 20047.44

22 Providing and fixing ISI marked oxidised MS door latches of size 300x20x6mm conforming to IS 5930 with screws etc complte.(copper oxidised as per IS 1378) 5.00 Nos 95.69 Rupees Ninety Five and Sixty Nine Paise Only 478.45 19644.68

A Sub-Total (Excluding GST) =A Rupees Eight Lakh Twenty Six Thousand Ninety Four and Thirty Five Paise Only 826094.35

II Electrical Estimation: FOR ALUMINIUM PARTITIONS, FALSE CEILING WORKS WITH NECESSARY MS SUPPORTS STRUCTURES AT RADOM HANGER IN OVERHAUL DIVISION, HAL(BC).

1 Supply, installation, testing and commissioning of 150W LED Flood light fixture with necessary interconnection with box and glansds etc in complete as directed by Engineer In Charge

a 150 W LED Flood light fixture 20.00 Nos 2683.05 Rupees Two Thousand Six Hundred Eighty Three and Five Paise Only 53661.00

b Weather proof box with terminals for out door installation 13.00 Nos 1261.86 Rupees One Thousand Two Hundred Sixty One and Eighty Six Paise Only 16404.18

c Supply, installation, testing and commissioning of 36 W LED panel light 2x2 feet 8.00 Nos 1885.59 Rupees One Thousand Eight Hundred Eighty Five and Fifty Nine Paise Only 15084.72

2 Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body. Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.

a Ceiling FAN 1200 mm sweep BLDC 4.00 Nos 2442.37 Rupees Two Thousand Four Hundred Forty Two and Thirty Seven Paise Only 9769.48

3 Supply, fixing, testing & commissioning of the following factory built powder coated Double door MCB/MCCB DB of any approved make fabricated out of M.S. sheet steel enclosure & necessary cutouts for operating the MCB knobs & comprising of suitable rating tinned copper busbars & earthing bus with tapped holes including internal wiring with stranded copper PVC wires or suitable size copper strips etc. & fixing the DB in flush with wall/ on wall as per site requirement with necessary M.S. angle supports, chipping the wall and replastering to smooth finish etc., wherever required as per site condition, complete in all respects, as directed by Engineer-in-charge and comprising the following as detailed below:

a 6 Way ( 4+18) Horizontal Double Door TPN DB 2.00 4490.68 Rupees Four Thousand Four Hundred Ninety and Sixty Eight Paise Only 8981.36

4 Supply and fixing of 5A to 32 A rating,240/415V, 10kA, C curve MCB suitable for inductive load for the following poles in the existing MCB DB complete with connections,testing and commissioing as required

a Single Pole 20.00 Nos 241.53 Rupees Two Hundred Forty One and Fifty Three Paise Only 4830.60

b Triple Pole with Neutral 3.00 Nos 1102.54 Rupees One Thousand One Hundred Two and Fifty Four Paise Only 3307.62

c Supply, fixing, installation and testing of the 40 A four pole (three phase and Neutral) MCB,415 V,having sensivity current of 30mA in the existing DB complete with connection, testing and commissioning, etc., all complete as directed by Engineer-in-Charge. 2.00 Nos 2925.42 Rupees Two Thousand Nine Hundred Twenty Five and Forty Two Paise Only 5850.84

5 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm Fire resistant LSZH/ low smoke HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. Fire resistant LSZH/ low smoke HFFR PVC insulated copper conductor single core cable etc as required.

a Exhaust Fan/ Ceiling Fan points 7.00 Nos 1444.07 Rupees One Thousand Four Hundred Forty Four and Seven Paise Only 10108.49

b Two Light Point Controls 4.00 Nos 2286.44 Rupees Two Thousand Two Hundred Eighty Six and Forty Four Paise Only 9145.76

6 Supplying and fixing following suitable size GI/PVC Box with modular plate and cover on front on surface or in recess, including providing and fixing 6 pin 5/6A & 15/16A modular socket outlet and 15/16 A modular switch, connections etc., as required. 10.00 Nos 558.47 Rupees Five Hundred Fifty Eight and Forty Seven Paise Only 5584.70

7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required.

a 3 X 2.5 sq. mm ( For Lights) 400.00 Meters 263.58 Rupees Two Hundred Sixty Three and Fifty Eight Paise Only 105432.00

b 3 x 4 sq. mm (For 6A & 16A power points) 300.00 Meters 316.10 Rupees Three Hundred Sixteen and Ten Paise Only 94830.00

c 3 X 6 sq. mm ( For FOD Jig & Engine Bay ) 60.00 Meters 408.47 Rupees Four Hundred Eight and Forty Seven Paise Only 24508.20

8 Supply, laying, testing & commissioning of following size LT cables

a Supply of 4CX 16 Sqmm Aluminium armoured conductor LT Power Cable 50.00 Meters 162.71 Rupees One Hundred Sixty Two and Seventy One Paise Only 8135.50

b MV Cable Laying(up to 35Sqmm) 50.00 Meters 30.51 Rupees Thirty and Fifty One Paise Only 1525.50

c Supplying and making end termination with brass compression gland and aluminium lugs for 4C X16 Sq mmsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4.00 sets 310.17 Rupees Three Hundred Ten and Seventeen Paise Only 1240.68

a Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 2.00 Each 7077.12 Rupees Seven Thousand Seventy Seven and Twelve Paise Only 14154.24

b Supplying and laying 25 mm X 5 mm G.I. Strip 20.00 Meter 135.59 Rupees One Hundred Thirty Five and Fifty Nine Paise Only 2711.80

c Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 20.00 Meter 42.37 Rupees Forty Two and Thirty Seven Paise Only 847.40

10 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan). Including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil & refilling the same soil and disposal of surplus excavated soil as directed, with in a lead of 50m.

a Excavation all kinds of soil 1.00 CUM 220.59 Rupees Two Hundred Twenty and Fifty Nine Paise Only 220.59

b Refilling of same soil 1.00 CUM 273.73 Rupees Two Hundred Seventy Three and Seventy Three Paise Only 273.73

11 Demolishing Cement Concrete manually/machanical means including disposal of material within 50 metres lead as per direction of Engineer in charge 1.00 CUM 3009.59 Rupees Three Thousand Nine and Fifty Nine Paise Only 3009.59

12 Providing 1:2:4 cement concrete using 20mm graded aggregate including curing etc. and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing,and reinforcement-All work up to plinth level: 1.00 CUM 7274.07 Rupees Seven Thousand Two Hundred Seventy Four and Seven Paise Only 7274.07

B Sub-Total (Excluding GST) =B 406892.05

TOTAL VALUE (A+B) 1232986.40

The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount

Tenderer's Quote (Excluding GST) 1232986.40 FALSE

Add 18% GST 0.00

Grand Total (Including GST) 0.00

Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.

WARNING: PLEASE ENTER PERCENTAGE QUOTE

HINDUSTAN AERONAUTICS LIMITED

Overhaul Division

Pre-Qulification Profile

Tender Ref No. or Contract No.: HAL/OVL/PM/TN/C-096/25-26

Name of Work: ALUMINIUM PARTITIONS, FALSE CEILING WORKS WITH NECESSARY MS SUPPORTS STRUCTURES AT THE EXISTING RADOM HANGAR TO ACCOMMODATE VARIOUS OFFICE REQUIREMENTS PERTAINS TO KIRAN STRUCTURES ALONG WITH ALLIED CIVIL WORKS IN OVERHAUL DIVISION, HAL (BC) (CIVIL & ELECTRICAL)

Estimated Amount in Rs.: Rs. 14,54,924/- including GST

PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3

Sl.No Description Details Enclosed / Not Enclosed Remarks

1 Name of the Individual / Firm / Company: * Mandatory

2 Type of ownership

If Other, please specify

3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

4 Address for correspondence:

5 (b) Service Tax Registration No

5 (c ) Goods and Service Tax ID No.

6 Contact details

Contact person name Please Enter Contact person Name

Mobile No. Pls Enter Mobile No

Ph. No. with STD code

FAX No. with STD code #N/A #N/A

7 Registered Contractor

If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1

Registration No. 199999 7 F 2

Category 200000 6 G 3

PEMD Amount ( If paid ) 499999 6 H 4

8 Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

9 Details of person holding the power of Attorney (If different from contact person)

Ph. No. with STD code

FAX No. with STD code

10 DECLARATION I

The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.

11 DECLARATION II

I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.